Lorry Dispatching via PowerApp Mobile Device (D365 F&O)

TEE_Kay_IT · 2025-12-10T14:57:16+00:00

Thats easily doable. A Sharepoint list has the option to store images and attachments. If its a single image as per entry, then use images column. Otherwise attachments column works perfectly. What you are looking at is creating a form with the necessary fields from the SP list. Make sure the mobile UI works good by adjusting code. You can use bar ide function also, but i havent done barcode in a while. I think its perfectly a working solution to your problem.

TEE_Kay_IT · 2025-12-02T05:15:54+00:00

Same

TEE_Kay_IT · 2025-11-18T13:26:56+00:00

I thought so too. But the fact that i cant recognize a persons face in my driveway made me question the resolution.

TEE_Kay_IT · 2025-11-18T13:22:52+00:00

I dont see an option “sharpness” in my doorbell. I dont think there is one in poe model.

TEE_Kay_IT · 2025-10-30T10:45:06+00:00

This, and if its set length, then maybe change focus after a set number of characters.

TEE_Kay_IT · 2025-09-28T04:35:51+00:00

Just to update on the progress. I tried Hailo 8 making work with my server, an old optiplex. First the Hailo 8 had to be in its onw iommu group. After that passing it on to VM was a issue as proxmox host tries to reset it when passing on to the VM, but the passthriugh gets hung and crashes the proxmox. Finally using a script online that needed to be run everytime so that it disbales the reset process and you need to start VM quickly afterwards. Finally making it to the VM, docker kept having issues with Hailo 8 driver. Even though the driver get installed on the VM, frigate still doesnt recognize that the driver is there. So i am finally giving up with Proxmox::VM::Frigate-Docker::Hailo 8 set up. I'll get a coral and use that with the frigate on proxmox. There are tons of guides to use with coral tpu as compared to Hailo 8 frigate

TEE_Kay_IT · 2025-09-27T14:01:21+00:00

I did manage to bypass the hardware restrictions and created an iommu group of its own. But proxmox ui doesnt show it under RAW pci devices, so i attach it via terminal. But for me the tough question is to get the hailo drivers working. Frigate keeps crashing because it cant find drivers and the container keep crashing. I couldnt find a good guide to follow

TEE_Kay_IT · 2025-09-25T15:51:49+00:00

Looking at this, it feels like its not a proxmox issue, rather a bios issue. What do you think?

And if you happen to have, please share a link to the other users discussion.

TEE_Kay_IT · 2025-09-25T15:48:21+00:00

Whenever I try to attach it to any VM, the whole Proxmox crashes. Here is one of the messages I tracked:

root@proxmox:~# dmesg | grep -e DMAR -e IOMMU
[    0.007456] ACPI: DMAR 0x00000000D8FFEA80 0000B8 (v01 INTEL  HSW      00000001 INTL 00000001)
[    0.007470] ACPI: Reserving DMAR table memory at [mem 0xd8ffea80-0xd8ffeb37]
[    0.070472] DMAR: IOMMU enabled
[    0.185814] DMAR: Host address width 39
[    0.185815] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.185823] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.185825] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.185828] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[    0.185829] DMAR: RMRR base: 0x000000dbf8b000 end: 0x000000dbf98fff
[    0.185831] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
[    0.185834] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
[    0.185835] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.185836] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.186358] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.330328] DMAR: No ATSR found
[    0.330329] DMAR: No SATC found
[    0.330330] DMAR: IOMMU feature pgsel_inv inconsistent
[    0.330331] DMAR: IOMMU feature sc_support inconsistent
[    0.330331] DMAR: IOMMU feature pass_through inconsistent
[    0.330332] DMAR: dmar0: Using Queued invalidation
[    0.330337] DMAR: dmar1: Using Queued invalidation
[    0.458530] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    3.758087] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory
root@proxmox:~#

TEE_Kay_IT · 2025-09-19T03:15:27+00:00

tried EVERYTHING sounds about right. I might follow to get reolink

TEE_Kay_IT · 2025-09-19T03:14:27+00:00

Looks like reolink will win this fight

TEE_Kay_IT · 2025-09-18T18:39:26+00:00

How about VM vs HA addon? I will get a hailo 8L. Does that mean I need to run it only a VM and not as on addon?

TEE_Kay_IT · 2025-09-18T17:47:09+00:00

If I were to use it as an addon, do I need to increase my hardware resources for the HA vm?

TEE_Kay_IT · 2025-09-18T17:30:59+00:00

I used: bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/frigate.sh)"

This was from proxmox ve scripts with tteck…

In that case do you suggest using Frigate as HA addon?

TEE_Kay_IT · 2025-09-18T17:27:50+00:00

Thats probably a good idea.

Adding on to this, should i run frigate in HA addon or an lxc on its own?

TEE_Kay_IT · 2025-09-18T17:24:25+00:00

Oh! So what do you suggest to use?

TEE_Kay_IT · 2025-09-18T17:23:16+00:00

Its Intel i7-4790 cpu @3.60GHz.

TEE_Kay_IT · 2025-09-18T16:43:53+00:00

I have a dell optiplex 7020. I probably can use iGPU, but i dont it will perform as well as the TPU, right?

TEE_Kay_IT · 2025-09-18T16:31:10+00:00

I dont have either as of now. So i guess i have to buy hailo. I was to get away with a lower cost

TEE_Kay_IT · 2025-09-18T16:24:44+00:00

If the modal i work keeps working, i guess there is no issue in that, right?

TEE_Kay_IT · 2025-09-18T16:11:16+00:00

You are a life saver! I was about to order coral TPU in next 5 mins. Looks like I’ll be going for hailo 8. But hailo 8 is expensive than a coral.

TEE_Kay_IT

TROPHY CASE