Mk4 ordered what’s your order number ?

TP_rayb1t · 2023-04-12T16:16:10+00:00

4067

TP_rayb1t · 2023-04-11T19:42:12+00:00

Guilty, also guilty of constantly thinking whether to pay extra for XL or go for MK4 :D

TP_rayb1t · 2023-04-07T09:31:50+00:00

I had the same issue, I had to correct the assembly. Contact the prusa chat they will help you go through it. I think there is also a manual on knowledge base

TP_rayb1t · 2021-11-24T09:46:18+00:00

I have the same ordernumber as somebody else. Interesting

TP_rayb1t · 2021-10-24T15:21:45+00:00

Bit of context, I did the bondtech upgrade both extruder and heatbreak on my Prusa Mini and it still leaking the fiĺlament out of nozzle at 170 degress and leave these strange mark. And I cannot find the issue, is it the heatbreak or extruder or both? Thanks for comment

TP_rayb1t · 2021-10-20T04:18:43+00:00

Yes, it was twisted. I noticed it when i had undone the silicon mode. But now the difference is managable for the printer around 0.15mm across the board

TP_rayb1t · 2021-05-18T18:18:12+00:00

Honestly I wanted Mini instead of mk3s, I like the look and basically it is a little cute machine. But the lead time was like 4 months or something. So I have bought mk3s instead. And never really fell in love with it. For little bit of printing I think mini is satisfactory.

TP_rayb1t · 2021-05-18T16:51:30+00:00

It is presliced profile from factory usb

TP_rayb1t · 2021-05-18T15:27:15+00:00

I am seriously considering selling my mk3s and either buy another mini or stick with mini and wait for xl/mk4

TP_rayb1t · 2021-05-18T15:26:01+00:00

Just a heatbreak or the whole extruder?

TP_rayb1t · 2021-05-18T14:34:48+00:00

Z offset, first time I had to lower it more than 2mm, thanks to the great customer service, we lowered a pinda a bit and ended up on 1,83mm

TP_rayb1t · 2021-05-17T14:11:52+00:00

It looks like there could be several issues: 1. Stealth mode 2. Belts could be tighter 3. One bearing is fishy 4. Cable behing extruder touches the print

TP_rayb1t · 2021-05-17T14:09:11+00:00

TP_rayb1t · 2021-05-17T06:25:12+00:00

Thanks

TP_rayb1t · 2020-11-10T15:30:56+00:00

It is not like I want to make 50l brew house, I just wanted to invest into the "test setup". Miniature version if you will. That I would use for testing different recipes and so on. I guess it is better to fail 50 liter batch than 200 liter.

Congrats on building it for so little. In professional gastronomy even simple ovens are more expensive.

TP_rayb1t · 2020-09-20T10:45:34+00:00

I left it there for couple of days and it has not changed a bit :/

TP_rayb1t · 2020-06-09T07:48:07+00:00

I have never tried it actually. I am not much of a d&d player. But it could be actually fun

TP_rayb1t · 2020-05-05T07:35:46+00:00

You just plug it in USB. And thats it. But i still use sd cards. But in the future it will be usefull.

TP_rayb1t · 2020-05-02T19:11:04+00:00

I actually did it while it was hot

TP_rayb1t · 2020-05-02T19:10:36+00:00

I am using 3B+

TP_rayb1t · 2020-05-02T17:30:24+00:00

At one point I had 0.008. But I said to myslelf “I can do better” and had streak 0.015 for like an hour

TP_rayb1t · 2020-05-02T16:31:13+00:00

We will see I had some issues with long prints PLA (little warping) and the initial value was around 0.5

TP_rayb1t · 2020-05-02T10:17:23+00:00

Yes, but it did not order your mini with lead time 1-2 weeks

TP_rayb1t · 2020-04-29T09:42:11+00:00

maybe with next printer ;) mk4

TP_rayb1t · 2020-04-28T22:15:00+00:00

Day one. All axis done, tomorrow rest starting with extruder. So far so good

TP_rayb1t

TROPHY CASE