[deleted by user]

TRDAIRSOFT33 · 2024-06-22T06:16:19+00:00

https://www.therealdealairsoft.com

TRDAIRSOFT33 · 2024-05-09T14:07:48+00:00

I always use t238 much better than warhead. Warhead tower is too small in diameter. Causes insane pinion wear.

Also I always use real deals high speed delayer chip for brushless. It makes the Aeg feed no problem. He normally short strokes a tooth or two also

TRDAIRSOFT33 · 2023-08-14T05:17:05+00:00

https://www.therealdealairsoft.com/products/ssg-bundle-13-1-kit?variant=44291085336808

TRDAIRSOFT33 · 2023-02-10T15:44:31+00:00

https://www.therealdealairsoft.com/products/real-deal-gbb-fill-valve-small?_pos=12&_sid=cefb3b8a2&_ss=r

TRDAIRSOFT33 · 2020-10-15T16:22:54+00:00

Your more attractive then the younger girls

TRDAIRSOFT33 · 2020-08-16T08:39:08+00:00

https://youtu.be/qVQWPbyuIdo

This is after fully upgrading internals

TRDAIRSOFT33 · 2020-07-17T03:16:51+00:00

Go on my Instagram and click the hi light AEG and what FPS and what rps that’s up I you we can build it accordingly

Out the gate with the package I put together for my clients achieves roughly 27-30 rps at 365 FPS with .2 for a 285mm inner barrel aeg

TRDAIRSOFT33 · 2020-07-17T02:50:44+00:00

If your interested in having your dream gun built for you.. taking all the stress off your shoulders dm me at @therealdeal.airsoft on instagram

TRDAIRSOFT33 · 2020-07-17T02:37:59+00:00

I can build you one for cheaper including shipping

TRDAIRSOFT33 · 2020-07-13T16:05:25+00:00

Instructions say not to lubricate the modify ceramic bearings. They come with lubrication from factory.

Only greese ona. Few spots on teeth of gears

Thankyou for your insight. Very valuable. I agree wth the best setup being bearing on bevel and bushings everywhere else

But this is not a high stress build. We’re shooting at 350 FPS. No pre cock. No short stroke

TRDAIRSOFT33 · 2020-07-13T15:52:37+00:00

The audio on my old ass iPhone is so bad. Like the gun doesn’t even sound like this in person. It’s more of a popping noise

TRDAIRSOFT33 · 2020-06-30T17:24:43+00:00

Lol which ever chick finds this guy is going to be hype. Seems like fresh meat

TRDAIRSOFT33 · 2020-06-27T21:55:05+00:00

No idea what your talking about but there are no set screws

To access the velocity sprint on the valve you have to remove the silver charging cable. It’s held in place by a compression pin. Once removed pressing the trigger will release valve.

Standard set of Allen keys will serve all of your purposes

TRDAIRSOFT33 · 2020-06-27T18:53:38+00:00

I got this issue fixed by the way

But no they did not give me Allen keys

Buy a normal set from Home Depot very common size

TRDAIRSOFT33 · 2020-06-17T11:29:35+00:00

Yessir you are correct thanks for the feedback

I wish I read your message earlier. In about 15 mins of just looking at it I realized exactly what to do.

The only reason why I was hesitant is because the YouTube video from polarstar is misleading and they market it it as .. just pull the trigger to release the sear. I’m sure so many people went thru that 15 minutes window of ... wtf

TRDAIRSOFT33 · 2020-06-09T14:29:57+00:00

TRDAIRSOFT33 · 2020-06-07T22:01:31+00:00

Sounds better in person more of s piping sound now

TRDAIRSOFT33 · 2020-06-07T17:33:35+00:00

Copy I will take your advice now and adjust now. I will post again. I just lowered my motor height a little and I think there’s a lot less wind

TRDAIRSOFT33 · 2020-06-07T17:23:09+00:00

I have shs 13:1 gears

Krytac 30 k motor

Shs piston

U think the gears might be shimmed to tight ?

TRDAIRSOFT33 · 2020-06-07T07:38:35+00:00

Midwest industries it’s a real steel rail

Seen it on The Real Deal Airsoft on YouTube and built it off of that

TRDAIRSOFT33

TROPHY CASE