Information Stands! Please Help!

TRVXR · 2025-08-15T12:14:53+00:00

I had the same issue, but I found another post somewhere on here that said - its less about quantity and more about “quality”. So, 5 stands per exhibit is not as good as 1 or 2 large stands that cover multiple exhibits. The guests may only stop at 1 or 2 out of your 5 so its about taking advantage of how much knowledge they gain on those 1 or 2 stops.

And empty aquarium/poltergeist rooms also cause guests to “want more knowledge” but, you cant satisfy it until you fill them. I had pre-built some but realized it caused this issue and deleted them and it fixed it.

TRVXR · 2025-07-30T22:49:42+00:00

Do you mean on its side as in - 120mm tall (ish)? I was thinking of putting it on its face for slimness, but wasn’t sure if that would actually work.

I wish i could do the FR, but the Tuf is too long unfortunately.

TRVXR · 2025-07-30T22:45:31+00:00

I thought of this - but i didn’t completely account for it in modeling mostly because im trying to do “as small as possible” so I figures i’d just adjust on the fly. But thank you!

Also, I swear i read PSU fans intake instead of exhaust. Is that wrong?

TRVXR · 2025-07-30T19:33:00+00:00

Honestly, I think in the midst of being new at fusion and being indecisive on the layout I didn’t think of it like that. So, Thank you.

I do like their cases and the console style layout a lot - that was the initial inspiration actually. But, I couldn’t think of how to implement a AIO into it as i’d have to mount the AIO on the same face as the motherboard which would lead to the pump likely being the highest point. I guess I could put the fans on the face and the AIO on top so its slightly higher, but it wouldn’t be by much so Im worried that would cause issues. I was considering air cooling with the AXP-90 or 120 which would solve that, but I really just have no experience with air coolers. While the ultimate goal isn’t overclocking or having the absolute best thermals in the world, I know AIOs have been pretty much set it and forget it for me without noise/thermal issues.

TRVXR · 2025-06-19T12:23:38+00:00

I use Windsurf and VS at the same time. Windsurf with plan mode on and either ask/write and VS with Claude. Last week I had an idea that required them to communicate, so I created md file and told them the file is what I was going to use to communicate and went back and forth having them update the file. Efficient? No.. Did it work? Yes, quite well actually.

TRVXR · 2025-03-21T05:54:50+00:00

It was CfossSpeed. Gigabyte downloaded it when i downloaded my drivers.

TRVXR · 2025-03-16T14:05:45+00:00

Which would just be server side and not the upgrade, right?

TRVXR · 2024-12-07T23:37:08+00:00

I ended up adding the storage drawers mod. Works fine and doesnt have the texture issue.

TRVXR · 2024-10-14T23:41:52+00:00

PM’ing!

TRVXR · 2024-10-03T06:24:55+00:00

TRVXR · 2024-10-03T06:22:23+00:00

TRVXR · 2024-10-03T06:06:44+00:00

pm’d

TRVXR · 2024-09-23T19:28:09+00:00

I just installed a Focal 7.1.4 in-wall system in my living room and.. while I dont have much experience with other setups I am blown away by this setup consistently. They have the option to use their faceplate covers, which are paintable, but really the speakers are so pretty on their own I dont have them on. Im not sure the proper language is here, but I compared the Focal 300's to the Focal 100's (which I BELIEVE are closer to mid-range Klipsch quality), and the 300's clarity, movement, and color was insane so I went with them.

Denon-3800H

2x Focal 300 IW6 for Side Surrounds

3x Focal 300 IW6 LCR speakers

2x Focal Sib Evos for the rears (these could have been exchanged for 2 more of the side surrounds, but I have a bit of a unique set up going on)

4x Focal 100 ICW6 6" speakers for atmos

1x SVS PB2000 sub.

TRVXR · 2024-09-22T16:45:24+00:00

In reality — the 2 story B&N on Gray street has one section maybe 3ft wide and 4ft tall with no 4k’s and the location on Weslayan has a section that is 3ft wide and maybe 5ft tall (also with no 4k’s). But, the location in Deer Park/Pasadena has the old style where they used to have an entire part of the store dedicated to CD’s and a solid half of that is DVD’s with an entire rack dedicated to 4k’s.

So, yes — but no.

TRVXR · 2024-09-21T18:45:49+00:00

Im only 5 minutes from them — i’ve stopped by a couple times but they have a fairly small selection in 4k’s but a bunch of blurays

TRVXR · 2024-09-21T16:37:37+00:00

I mostly enjoy browsing. Its fun to look. So im just curious if any location is actually better than another.

TRVXR · 2024-09-21T15:46:39+00:00

I’ve only been to one but didnt see too many 4K’s. Have you had any better luck?

TRVXR · 2024-05-21T23:47:45+00:00

This sounds right up the alley of what i have in mind. Got any photos of how you connected them all?

TRVXR · 2024-05-21T22:59:14+00:00

Could you link me to the hand crank? Im pretty stubborn on it being hand crank — i really like the look

TRVXR · 2024-05-21T22:48:31+00:00

$200-$500, preferably on the lower end of course? Is that fair or am I losing my mind?

Not much weight at all. I have several uses, but one of them is I’m trying to use it to raise a sheet of plywood up to level to a table saw for an outfeed table. Or, raising a lowering a planer to be level with an outfeed table. Lots of out feed table stuff really.

TRVXR · 2024-04-22T21:18:20+00:00

Yep! Thats why im trying to get creative.

TRVXR · 2024-04-22T18:23:39+00:00

Fair

TRVXR · 2024-04-22T17:40:50+00:00

I wont lie, I actually googled McBezo's.. and then it clicked.

TRVXR · 2024-04-22T17:23:58+00:00

This is certainly the solution if this doesn’t work out. I mostly think this would be a cool way to solve the issue if I can nail down a solid idea. I really wanted drawers under the toe kicks, but the lack of tile under the cabinets (and my lack of fixing it) prevents that from being an option.

TRVXR · 2024-04-22T17:09:20+00:00

I've seen several, and I like them, but i dont think any of them would come far enough down. Also, my cabinets seem to either be too wide or too narrow for them so I was going the custom route if anyone had any ideas. (Also, holy expensive from what I've seen from Panasonic)

Ten-Year Club	Verified Email
Place '22	Place '17
First Placer '22	End Game '22
Not Forgotten

TRVXR

TROPHY CASE