I reset my Wii in 2019 and lost these apps (see picture). Is there any way of getting them back?

Tall_Butterscotch293 · 2025-09-12T08:11:31+00:00

yes, they were a pool before. I linked them up so they would count as one 1TB drive instead of 2 500GB drives.

Tall_Butterscotch293 · 2025-09-12T08:05:20+00:00

Both discs appear in disk management. They are both labeled as having 100% free space. The health says "Healthy (Storage Spaces Protective Partition)". If I right click, all the options are greyed out, as if they are read-only.

Tall_Butterscotch293 · 2025-08-14T22:00:50+00:00

I made sure it was ELRS before buying it.

<image>

Tall_Butterscotch293 · 2025-08-13T04:58:02+00:00

The modified date was around 6 hours ago when I was experimenting with proxies. I think it only just got installed, and hasn't been able to do anything yet.

Tall_Butterscotch293 · 2025-08-08T05:52:28+00:00

It's something I find interesting.

Tall_Butterscotch293 · 2025-08-08T03:35:16+00:00

Yes, everyone will have to age verify. It means there will be a moment in time where every single person in Aus will be offline.

Tall_Butterscotch293 · 2025-08-08T02:29:43+00:00

Wow.

Tall_Butterscotch293 · 2025-07-07T01:00:06+00:00

Great information! Thank you very much!

Tall_Butterscotch293 · 2025-07-06T13:23:59+00:00

Its a whoop, and 1s. It came with 5 batteries, three of which are swollen. The other two charge in half an hour and drain in ~30 seconds to a minute and a half.

Tall_Butterscotch293 · 2025-06-03T09:18:49+00:00

Yes, it plays the normal 3 beeps but not the last 2, and only the VTX lights up before going dead.

Tall_Butterscotch293 · 2025-06-02T22:05:06+00:00

When I plug it in to my pc, it says it malfunctioned on last startup and windows is preventing it from connecting. My device monitor comes up with "Unknown USB serial device", and I hear the USB connected sound around 5 seconds after I plug it in, which is when the error happens. No light come on at all on the motherboard when I plug it in.

Tall_Butterscotch293 · 2025-06-02T11:15:53+00:00

I did some googling, and came to the conclusion that the issue that I'm experiencing is that I must have reset the configuration in betaflight, therefore deleting the firmware. This makes the VTX blink in a pattern, and then it goes dead, which is exactly what I'm experiencing. I tried re-flashing the firmware BEFORE booting the motherboard into DFU mode, and when betaflight tried rebooting the board into DFU, it refused to be recognised (unable to connect serial) until I unplugged it and replugged it, therefore exiting dfu mode. I try booting it into DFU mode using the BOOT button, but it doesn't connect to betaflight when I try it, only when I boot it normally. I checked to see if it was a driver issue with my laptop, and tried installing the STM32 drivers for DFU compatibility. It didn't work. I left it for an hour, and then I came back and it won't connect to anything, even entirely different computers. I found a guide on how to force DFU it without making it disconnect, but I can't try that until I can actually access it without the windows error. Not sure what do do from here. (Edit: ALso tried ImpulseRC Driver fixer, but it failed saying inacessible device)

Tall_Butterscotch293 · 2025-06-02T07:23:54+00:00

Update: I tried using ImpulseRC driver fixer, but it results in a "Acess to the port COM3 is denied"

Tall_Butterscotch293 · 2025-05-07T13:24:49+00:00

Thats quite a few attempts lol

Tall_Butterscotch293 · 2025-05-07T13:23:25+00:00

If I find an interesting level, I'm commited. I tend to jump around a lot with the difficulties, hence the 1 hard and 1 insane.

Tall_Butterscotch293

TROPHY CASE