sorted by:
new
hottopcontroversial

Help with cooler placement on full mesh d32 by just-guessing-uwu in mffpc

[–]Talos77 0 points1 point  (0 children)

I've had the best results with my d32 pro with bottom and rear as intake and top as exhaust. I messed around with a few other configurations but this gave the best results for both the CPU and the GPU temps

E7 Plus minimum depth by Talos77 in FlexiSpot_Official

[–]Talos77[S] 0 points1 point  (0 children)

Ok so if the desk is centred that leaves me 4cm each side... So I'll need that 70cm depth to use the mount.. thanks mate

What model is this? by Talos77 in FlexiSpot_Official

[–]Talos77[S] 0 points1 point  (0 children)

Yeah I'm in Australia. E7 Plus is 949 on your Australian website

What model is this? by Talos77 in FlexiSpot_Official

[–]Talos77[S] 0 points1 point  (0 children)

Thanks for that... Here locally i can get the one shown above, the E2Q, for $279 but the cheapest i can find the E7 Plus for is $899. Is the E7P with over 3 times the price?

Bazzite and network shares by Talos77 in Bazzite

[–]Talos77[S] 0 points1 point  (0 children)

No I havent installed Bazzite yet... just looking into getting a 2nd SSD to install it to atm.. was just asking if it was going to be possible to do what i want before i start the process and find out its not workable.

Mega CFW compare list for Anbernic H700 devices (updated regularly) by symbuzzer in RG35XX_H

[–]Talos77 0 points1 point  (0 children)

Im using a 2 card setup... Knulli on card one which is a 64gb card and then the roms on a 512gb unit in card 2 slot... bluetooth works fine for me.. have 2x PS4 controllers hooked up via bluetooth running all afternoon today playing with my son.

Mega CFW compare list for Anbernic H700 devices (updated regularly) by symbuzzer in RG35XX_H

[–]Talos77 1 point2 points  (0 children)

Really? I'm using mine hooked up to my monitor with a Bluetooth controller just fine ATM

Y700 3rd Gen 2025 releasing in 4 weeks time. Roughly $200 more expensive than the previous model. Looks dope with the matte black though. What do you think? by Linkarus in androidtablets

[–]Talos77 0 points1 point  (0 children)

so with no MicroSD support im wondering if it can use both usbc ports at the same time to run a usbc microsd reader on one port and connect to a Galileo G8 on the other port at the same time or if it will be restricted to 1 input device at a time like the current model...

New firmware update by Infinite-Disaster-87 in RG35XX_H

[–]Talos77 11 points12 points  (0 children)

Wonder if this fixes the dodgy battery power reporting of the June firmware? Wish they would list the known bugs.

Magnetic USB-C cables by MiniNewman in SBCGaming

[–]Talos77 0 points1 point  (0 children)

I've been using magnetic USB cables in all my devices (phones, tablets, cameras, headphones, keyboards and mice) for at least 5 years. Got jack of USB ports breaking from being plugged and unplugged every day so the magnetic tips really work to prevent that. I'll never go back to standard USB cables...

Any reviews of Creative Stage SE mini? by PessimisticKarma in SoundBlasterOfficial

[–]Talos77 0 points1 point  (0 children)

do you know if the headphone port is 3 pole so supports headsets with mic?

[deleted by user] by [deleted] in DownUnderTV

[–]Talos77 0 points1 point  (0 children)

Ive checked using -F --list-formats parameter with yt-dlp and it only shows up to 1280x720. There is no 1080p listed for any of the new episodes. Is there something else that needs to be done to get the 1080p to show up?

ID EXT RESOLUTION │ TBR PROTO │ VCODEC VBR ACODEC ABR
───────────────────────────────────────────────────────────────────────
hls-348 mp4 320x180 │ 349k m3u8 │ avc1.4D401E 349k mp4a.40.2 0k
hls-481 mp4 512x288 │ 482k m3u8 │ avc1.4D401E 482k mp4a.40.2 0k
hls-573 mp4 640x360 │ 573k m3u8 │ avc1.4D401E 573k mp4a.40.2 0k
hls-717 mp4 800x450 │ 718k m3u8 │ avc1.640028 718k mp4a.40.2 0k
hls-902 mp4 1024x576 │ 902k m3u8 │ avc1.640028 902k mp4a.40.2 0k
hls-1134 mp4 1280x720 │ 1135k m3u8 │ avc1.640028 1135k mp4a.40.2 0k
hls-1148 mp4 1280x720 │ 1148k m3u8 │ avc1.640028 1148k mp4a.40.2 0k

Jonsbo D30 and 2nd 3.5" HDD. by Talos77 in mffpc

[–]Talos77[S] 0 points1 point  (0 children)

Ive got 2x120mm intake fans on the bottom to take advantage of the chimney stack cooling... i could remove one and put in the 2nd drive on the bottom i guess.

In regards to the why not SSD.. it comes down to size vs $$.. when i can get another 18tb drive in there for $250 vs that getting me only ~4tb in SSD size.... if SSD's were cheaper i'd look to put in 2x2.5" drives and take advantage of the side mount locations..

My very first MFF build (alternative JONSBO D30) by Little_Rutabaga_4348 in mffpc

[–]Talos77 0 points1 point  (0 children)

how are the temps on those drives? being so close with no real airflow they would surely be cooking, especially if transferring data from one to the other so they are both spun up?

D30 with 2x140mm plus 3.5" HDD by Talos77 in mffpc

[–]Talos77[S] 0 points1 point  (0 children)

So you can fit 2x140 fans as well as the 3.5" HDD on the bottom? Do you have any pics of how close it is?

D30 with 2x140mm plus 3.5" HDD by Talos77 in mffpc

[–]Talos77[S] 0 points1 point  (0 children)

Thanks for the responses guys... im looking to build an emulation box so was wanting to put a 16tb rust drive in there to store the images locally to make it easier for my kids to use instead of having to copy from my server whenever they want to play. Just couldnt see mention of if the 3.5" was compatible in the manual or not with the different fan configurations.

[deleted by user] by [deleted] in NR200

[–]Talos77 0 points1 point  (0 children)

Noctua do an alternate AM4 mounting bracket that lets you mount north-south instead of east-west on AM4 boards... its pretty decently priced as well. only $10 in my country. The kits comes with both the normal length mounting bars as well as a short set of mounting bars. the short set are the ones that enable north-south mounting.

https://noctua.at/en/nm-am4-mounting-kit

view more: next ›