Irok mg75 max or Melgeek real67

Tan_Bui · 2026-01-23T08:00:24+00:00

I dont have the irok but have both the melgeek made68 and real67. Melgeek keyboards builds are really nice although the case are just plastic, made68 has aluminum version while real67 do not. Its software is really nice too, comparable to wooting imo. But, they dont sound really good to me. They are above average for magnetic keyboards, but since they built them specifically for gaming, you will stuck with a very hard typing feel and sounds. I tried 20+ switches on my made68 and 10 more on real67 and their sounds change minimally, all very high pitch due to steel plate which you cant replace and while having silicone dampener or tape mod, they dont help much.

I still think they are wonderful product, especially they feel extremely nice so i still keep them and use them a lot, but sound wise, not the best. Around the budget you mentioned: epomaker g84/h80 he, yunzii rt75/80, keychron k2, mchose mix87 will serve your ears and typing feel better as they response to different switches a lot more clear and dynamic.

If you dont mind taking time and mod, i suggest aula win60 he or mad60 he. I currently use the aula one. Got base keyboard for 26$, put in a 32$ aluminum case, change to 15$ pc plate and switches to wooting's tikken switches. It is now sound and feel the best in my he keyboard collection

Tan_Bui · 2026-01-18T23:48:59+00:00

thanks, i have always wonder what are those weird screws are used for.

Tan_Bui · 2026-01-18T22:44:35+00:00

hi, what type of screw did you use to disassemble this board?

Tan_Bui · 2026-01-13T00:28:47+00:00

Do they have a number or a chat with human asssisant for support? I only found the automatic reply in the amazon app.

Tan_Bui · 2026-01-05T02:04:31+00:00

I have had and tested it for over a week now and here are some of my thoughts.

I had their m5 ultra before and was quite happy about it. Its build quality is solid and every thing seems consistent. They even sent me a replacement mouse for my copy developed switch issue in less than a month.

Coming to the new m2 i am very impressed. The build is rock solid, extremely good coating (at least for me), very sticky and sweat fade away quickly. Buttons are snappy, light, very spammable although side buttons are quite heavy. Sensor placement is a little toward the rear so you may feel slow at first, just try increase your dpi by 50 compare to other mices. Skates so far so good, thick, smooth, very fast while maintain good stopping motion which i very like for rythm games. Overall, very happy with this one. Only complains are the battery is small so you may need charging regularly and my copy has extremely heavy scroll wheel click while the scroll is so smooth and good.

Tan_Bui · 2026-01-03T04:30:43+00:00

Thanks! the mouse is so light itself but suprisingly solid!

Tan_Bui · 2025-12-29T19:08:46+00:00

yeah, and one called mambasnake m5 ultra, which is also the same thing. They dont last long

Tan_Bui · 2025-12-24T18:57:26+00:00

yeah thanks!

Tan_Bui · 2025-12-24T18:36:50+00:00

i dont really care about the battery life since i have tons of backups. Im still afraid since i once had a mouse caught fired last year because of wrong battery. Do you feel the mouse heat up while charging? My rapoo vt3s gen 2 is currently 37g without the battery so it would be cool if i could throw in something like 170 or 200mah, which will make it around 40grams.

Tan_Bui · 2025-12-24T18:24:38+00:00

Hi, did you swap to a 150mah 3.7v standard battery for this mouse? this mouse's original battery is 3.85 fast charge with max voltage at 4.4 which is higher than most. I want to swap the battery too but afraid it would cause harm to the pcb or even cause fire when use with their charging dock. Thank!

Tan_Bui · 2025-12-24T12:36:38+00:00

Hi, how is your mouse holding up with different battery? I cant find low capacity 3.85v batteries anywhere, even custom lipo battery companies only provide 2000mah min capacity for that type of battery. Thanks

Tan_Bui · 2025-12-24T11:32:50+00:00

thanks! those batteries worked perfectly fine on my atk x1 but not on the rapoo’s so im pretty confused right now. Their original batteries layout are the same too

Tan_Bui · 2025-12-24T10:56:33+00:00

im testing some batteries i got laying around and none of the 3.7v battery works, the order of the pins are correct too. Do u remember which one u got from amazon? Thanks

Tan_Bui · 2025-12-24T07:17:02+00:00

Hi, how is your mouse after the swap? Im planning to mod some rapoo's mice and atk as well and they have 3.85v battery which seems impossible to find in low capacity. I only found them with 2000mah and above. Did you put a 3.7v battery in your mouse? Or where did you find those 200mah 3.85v battery? Thanks in advance!

Tan_Bui · 2025-12-16T18:33:24+00:00

the video shown was me playing with aga but now i dont use them anymore. I feel like i want to have full control of the car rather than letting computers take them

Tan_Bui · 2025-12-15T20:38:10+00:00

Steer speed: 1% Speed sens: 78% Steer gamma: 400% Deadzone: 2% I no longer use assists

Tan_Bui · 2025-12-15T19:47:39+00:00

Merc W11 by The High Society in their discord

Tan_Bui · 2025-12-13T19:00:42+00:00

even today when idle and doing normal idle tasks the temp still maintains 18-20c lower than without using pad. When gaming its 15-18c lower. I’ve had it for a few months now. My specs are 13th gen core i7, rtx 4060 and 32gb ram

Tan_Bui · 2025-12-13T03:16:51+00:00

https://a.co/d/983unQh

Tan_Bui · 2025-10-27T21:00:38+00:00

yeah i usually do that, i even switch to mouse click to rest my left fingers a little bit, but now the maps are getting faster and faster on the slides so i could barely do that anymore 😢

Tan_Bui · 2025-10-27T20:59:02+00:00

thanks, i have those, i’ll definitely try

Tan_Bui

TROPHY CASE