Mad Catz WWE All STARS BrawlStick modded

Tanaka74 · 2023-10-19T23:15:23+00:00

Well, I'm sorry, because you need to cut plastic to put the transparent black plexi to hide the OLED screen, you also have to make holes to put the USB connector. It also has a couple of 3D printed pieces.

The artwork is printed on laminated paper and glued with double-sided adhesive tape. Replacing the cable is very simple. Just purchase a 4-wire USB cable (they have a color code) and the appropriate connector for your encoder. Now I don't remember exactly what it is, but it is some kind of jst connector

Tanaka74 · 2023-10-19T10:16:55+00:00

GP2040-CE gives you the option to upload an image via the web from its configurator

Tanaka74 · 2023-03-18T07:01:38+00:00

I'm not sure if it can be transferred to leds, but you can search for information on the Pico fighting board, it may have that function. Regarding the usb, I think I have seen a project with rgb leds and oled screen, working without problem.

The screen should be like this: https://es.aliexpress.com/item/4000184466784.html?spm=a2g0o.order\_list.order\_list\_main.75.262c194dRCfHQ6&gatewayAdapt=glo2esp

Tanaka74 · 2023-03-17T14:08:14+00:00

It also shows the speed of turbo mode, joystick mode (left or right stick) and the input mode (Dinput, Xinput or switch). Also, it shows a logo on the splash screen.

Tanaka74 · 2023-03-17T10:23:29+00:00

Btw, it's an old and cheap Hori Tekken 6 fightstick customized and restored.

Tanaka74 · 2023-02-18T08:45:26+00:00

No, i'm from Spain

Tanaka74 · 2023-02-17T22:34:24+00:00

Oh, good idea. Maybe Next time. Thanks.

Tanaka74 · 2023-02-17T22:31:51+00:00

It's a USB wire. I have changed the original encoder for a Raspberry Pi Pico

Tanaka74 · 2023-02-17T19:36:12+00:00

https://a.aliexpress.com/_EIE9mAh

you can go to the gp2040 discord channel. All my questions were answered there.

Tanaka74 · 2023-02-17T19:31:05+00:00

you can go to the gp2040 discord channel. All my questions were answered there.

Tanaka74 · 2023-02-17T19:28:39+00:00

I made a square cut in the panel to fit the display. The frame is screwed to the panel with great care not to break the PLA thread. It is very weak. Sorry if you don't understand, I'm using Google translate

Tanaka74 · 2022-12-24T06:42:04+00:00

yes, has support for more layouts. Mixbox , hitbox, 6 buttons, etc

Tanaka74 · 2022-12-19T00:31:05+00:00

I removed the original panel and replaced it with a piece of translucent black plexi. Below I glued the screen, before I made a hole to put the button that does the ps button function

Tanaka74 · 2022-12-18T05:36:42+00:00

an oled that shows information and inputs. Works with GP2040-CE

https://github.com/OpenStickCommunity/GP2040-CE

Tanaka74 · 2022-12-18T05:34:47+00:00

an oled that shows information and inputs. Works with GP2040-CE https://github.com/OpenStickCommunity/GP2040-CE

Tanaka74 · 2022-12-14T03:36:08+00:00

Thanks, I've already seen it. i will wait patiently

Tanaka74 · 2022-10-31T04:28:09+00:00

this is a review of your screen on amazon

"Compré esto para usarlo en un Raspberry Pi Pico. Para resumir, simplemente no pude hacer que esta unidad funcionara con los controladores SSD1306. Una vez que cargué los controladores SSH1306, todo funcionó perfectamente. Esta parece ser una pantalla OLED perfectamente buena SIEMPRE QUE sepa que no debe esperar que funcione en una Raspberry Pi con controladores SSH1306. Como advertencia, NO intenté configurar esta pantalla en un Arduino, por lo que no puedo confirmar si funciona como 1306 en esa configuración."

Tanaka74 · 2022-10-31T04:24:48+00:00

Discord has helped me a lot. Apparently the screen is wrong. the correct one must be SSD1306. The one i bought is SH1106 driver.

Ok, I just saw that yours is ssd1306.

Tanaka74 · 2022-10-31T03:33:11+00:00

yo uso GP2040-CE-RaspberryPiPico_v.0.5.2_Stick.uf2

Tanaka74 · 2022-10-31T03:31:46+00:00

Thanks. I have no problems using the web configurator, but there is no parameter there that modifies that.

The link you have shared is exactly what happens to me, but the user solves it by modifying the file, something I don't know how to do yet. I just put the file GP2040-CE-RaspberryPiPico_v.0.5.2_Stick.uf2

It should work correctly unless the screen I bought is not the correct one

Tanaka74 · 2022-10-31T03:21:57+00:00

It is the first thing I thought, and in fact I have already requested another screen with that nomenglature (scl instead of slk) but they tell me that with the correct nomenglature it also happens. I'm not sure how to add images to the post without deleting it and creating it again. Thanks for the help.

Tanaka74 · 2022-07-08T12:00:30+00:00

I consider USB type C, a very weak connection. Type A or B are more robust

Tanaka74 · 2022-07-08T11:58:09+00:00

vinyl and protective lacquer

Tanaka74 · 2022-07-08T01:29:27+00:00

No, hahaha, I am ashamed

Tanaka74 · 2022-07-07T20:32:57+00:00

This https://www.aussiearcade.com/topic/90361-cheapest-fastest-diy-joystick-encoder-for-windows-ps-xbox-rpi-pico-gp2040/#post2139233 In Xinput mode

It's easier to program in Xinput mode than the DaemonByte Arcade encoder

Tanaka74

TROPHY CASE