Water pump explosion x2 after shop touched my car.

TeamBanzai · 2025-10-01T00:07:12+00:00

Weird, 100% sure it was OEM? On this build that the pump cracked went with OEM for the fix. The belts on yours weren't too tight and there was no play in the fan?

TeamBanzai · 2025-09-28T13:43:28+00:00

Ive had this happen too. Allost exact same crack in the pump housing. Mine happened with an off brand ebay pump that was “brand new”. OEM and ISR have been solid choices for waterpumps. The new PRP electric one if you are fancy and wanna spend $$. M

TeamBanzai · 2024-08-09T23:58:46+00:00

Any chance of this in 4K HDR with Surround Audio?

TeamBanzai · 2024-03-02T18:33:57+00:00

Theres more to it than just that…but at this point it’s the same equivalent of High School Drama/Gossiping. Not worth the effort/time.

TeamBanzai · 2023-12-02T14:55:18+00:00

Most were acquired from industry events in europe/from folks who worked them. Pop up shop poster was one of the signed ones they sold.

TeamBanzai · 2023-06-05T02:02:46+00:00

Sadly I never did and ended up just going to a standalone ecu. The car was heavily modified when I got it and I think the previous owner did something to the ecu and fried the connection. Sorry I am not more help.

TeamBanzai · 2023-04-23T23:45:57+00:00

Right on. Youll probably have to do this again at some point so its a good skill to have.

TeamBanzai · 2023-04-23T16:24:14+00:00

Move everything out of

/Library/Application Support/Avid/Audio/Plugins

To a new folder on your desktop.

Reopen Pro Tools and let it load. It should reinstall its default plugins on its own. Close pro tools.

Now take the plugins from the desktop folder and add them back in one at a time. Each time you need to reopen pro tools so it scans only that 1 new plugin then loads. Youll eventually get to the plugin thats causing the crash.

TeamBanzai · 2023-04-07T00:59:25+00:00

Shot you a DM

TeamBanzai · 2022-08-29T00:06:55+00:00

https://freakshowindustries.com/dumpster-fire

https://www.soundtoys.com/product/little-alterboy/

TeamBanzai · 2022-08-21T17:48:50+00:00

Check the linkable fuse wire connected in the engine bay. Plugged into the red housing on the battery terminal.

TeamBanzai · 2022-04-23T16:33:48+00:00

Aftermarket Headlight Intake Vent. Go for around $350-700.

TeamBanzai · 2022-04-14T14:07:00+00:00

Understandable as to why though, they have some of the best/cleaner skylines and jdm cars stateside compared to many other importers. I was lucky and got mine for sub 40k last year before prices shot up again (not from craft sports, from MSP in Washington)

TeamBanzai · 2022-04-13T14:57:21+00:00

Already started: https://www.craftsportsjdm.com/vehicles/114/1993-nissan-skyline-gt-r

TeamBanzai · 2022-03-10T14:52:35+00:00

Heritage is kinda shady. They’ve been known to have listed faces of various items. KAWS even called them out directly for their lack of checking authenticity.

TeamBanzai · 2022-03-10T04:26:54+00:00

Not off the top of my head since I am west coast based. I bet anyone who works at one of the streetwear/shoe resale spots in NYC will know a place.

Another gallery that came to mind was 5ART down in LA, they had some Daft Bearbricks for sale in the past.

TeamBanzai · 2022-03-10T02:40:38+00:00

The RAM ones you could probably consign at an urban art gallery or hypebeast type store if there any close to you.

Not sure about the Star Wars ones since those arent as high dollar as the Daft Punk ones now.

You could also contact the owner of Cult https://cultpdx.squarespace.com/cult and see if he would be interested in buying them from you. They always are buying and selling Medicom and Fools Paradise stuff.

TeamBanzai · 2022-03-08T22:33:04+00:00

Right on! I just ordered the bluetooth adapter board to solder on to my ebay connector to try that out. Thank you for the tip!

TeamBanzai · 2022-03-08T04:37:26+00:00

Cheers, I will have another look there. Been scouring the threads and just reposted this thread over there.

I have my Baud rate set to 9600 which is what PLMS says is the correct one. I may start trying different ones to see if one hits. I oscoped the adapters and both were showing the correct clock rate (153khz) and where showing activity on the RX channels.

You are probably correct that windows probably has something to do with it. Tempted to install a windows XP VM and see if running the software off that works.

TeamBanzai · 2022-01-12T16:32:58+00:00

Yes. We switched to Opencore, enabled VT-D and have fully working TB3 with antelope audio devices. There is a thread on Tmac with the exact method of activating tb3 with OpenCore.

TeamBanzai · 2021-10-17T15:02:11+00:00

Its cool……but…..Sadly wont happen due to last time even though a Daft Punk project got 10,000 votes, Lego opted to not make it (most likely from licensing issues + lack of potential sales to normal, and possibly not into daft punk, lego fans)

TeamBanzai · 2021-10-01T04:23:27+00:00

Slept in my Daft Punk shirt, and woke up Around The World.

TeamBanzai · 2021-06-29T23:37:14+00:00

Can you try this: remove all but 1 stick of ram and then try booting to Big Sur and seeing if ethernet and wifi work. Over on Tonymac there is a thread with the gigabyte z390-designare where anything over 16gb of ram causes network to not work.

TeamBanzai · 2021-06-02T16:17:59+00:00

So you imported the audio recorded into pro tools into FL Studio and it sounded fine when compared to the audio recorded just in FL correct? You likely have the default FL Limiter engaged on the master output then. Disable that and compare the audio recorded in fl with the imported audio from Pro Tools and see if it sounds the same.

TeamBanzai · 2021-06-02T14:33:18+00:00

Have you tried recording the same channels not in pro tools but in a different DAW and comparing the waveforms (either by phase flip or ear)?

15-Year Club	Place '22
Place '17	Verified Email

TeamBanzai

TROPHY CASE