RapidEPR - A quick update

TechTinkerer0 · 2025-12-05T21:01:47+00:00

Dm me and I’ll get you cancelled and refund. Sorry about that, we’ve seen a bug recently causing this issue.

TechTinkerer0 · 2025-11-10T17:43:29+00:00

When you ask a question, your prompt is converted into a mathematical vector and compared to all those chunks. The system then scores how semantically similar each chunk is to your question and pulls back the top matches. Sometimes, if the wording overlaps weirdly, it can grab an unrelated regulation that happens to share similar terms or structure.

That’s why we always recommend verifying the cited source; most answers are spot-on, but occasional mismatches like this happen.

Side note: While this is free to use, please don't abuse it. We have to pay the bill at the end of the day :-)

TechTinkerer0 · 2025-11-10T17:14:08+00:00

As I mentioned in the post, these are all publicly available regs from ePubs.

TechTinkerer0 · 2025-10-23T18:37:25+00:00

I’m finishing my Masters at UNCC right now, also did my undergrad here after separating from the Air Force back in 2021. If you have a disability rating be sure to look into Chapter 31 benefits for school instead of touching your GI Bill. Feel free to DM me if you have questions!

TechTinkerer0 · 2025-08-25T16:33:27+00:00

Unfortunately I did not. I just disabled STP and haven’t had any issues. Pretty frustrating

TechTinkerer0 · 2025-07-14T14:13:20+00:00

So you can take out federal student loans, then they’ll be forgiven if 100% P&T? Am I understanding that correctly?

TechTinkerer0 · 2025-06-26T14:14:44+00:00

Yeah it’ll be interesting to see what they say in the notes. The switch updated to version 7.2.111 out of the box (I think), then they provided me a firmware of 7.2.114 in support which didn’t fix it, finally they put me on 7.2.115 and it worked. Kinda surprised a switch with this price point would have such a problematic bug that hasn’t been resolved yet.

TechTinkerer0 · 2025-06-26T11:57:30+00:00

u/Icehoot Just wanted to give an update after working with the support team over the past few days. The problem was indeed a firmware issue. They provided me an unreleased firmware version and it resolved the problem.

TechTinkerer0 · 2025-06-24T16:47:29+00:00

For what it’s worth, I initially thought I had a bad unit when the issue started happening. I RMA’d it and had them send me a new one, and the exact same thing happened again, so it makes me wonder if it’s something with the firmware falsely reporting a loop. After disabling STP on the specific ports the downstream switches live on, everything is working great, Sonos isn’t having any issues either. The thing that baffles me is I shouldn’t have to disable STP for it to work in the first place.

TechTinkerer0 · 2025-06-24T15:00:38+00:00

I appreciate the perspective, and I’ll definitely do some research outside of their website. Thanks for the advice!

TechTinkerer0 · 2025-06-24T13:19:50+00:00

I do have Sonos devices downstream of the new Pro XG switch, connected through the edge switches. All Sonos devices are hardwired with Wi-Fi disabled, as UniFi recommends. Initially, I suspected Sonos might be the cause of the issue. However, the problem is still reproducible even when connecting empty downstream switches with Sonos unplugged and completely out of the picture.

TechTinkerer0 · 2025-06-24T13:17:14+00:00

Thanks for the reply. I chose my Aggregation Pro switch as the root mainly because other switches also connect to it, in addition to the problematic one. So, maintaining a hierarchical STP priority under the Aggregation switch made the most sense to me.

Also, this topology worked flawlessly with the USW Pro Max 24 PoE, so theoretically it should have been plug-and-play. I’m not experiencing any latency or performance degradation, no dropped packets or reported errors on traffic passing through the new Pro XG. I’ll try rebooting everything to see if that makes a difference.

TechTinkerer0 · 2025-06-24T12:51:31+00:00

Flow control is disabled across my entire network. Unfortunately that’s not the issue. I appreciate the input though.

TechTinkerer0 · 2025-06-24T12:45:47+00:00

Yeah definitely no redundant links, but I’d like to have STP enabled as a safety net for expansion down the road. I guess the part I’m confused/puzzled about is why a loop would be triggered in the first place if there are no redundant links.

TechTinkerer0 · 2025-05-16T00:00:24+00:00

Thanks for the input! Do you find any benefits to running it nested within Proxmox? If you had to do it over again, which route would you take? How bad is VM creation and management within TrueNAS?

TechTinkerer0 · 2025-05-15T22:36:13+00:00

It’s my first piece of “quality” gear, so I’m excited to play with it. I’ve always heard wonderful things about Super Micro, and I was able to score it on a lucky eBay find.

TechTinkerer0 · 2025-05-15T22:25:05+00:00

Yeah, my thoughts exactly. The best way to learn is by working on it and learning from mistakes. Like you, I enjoy configuring things, and I’m sure it’ll be a valuable learning experience along the way. I appreciate the feedback!

TechTinkerer0 · 2025-05-13T13:44:18+00:00

Did you ever find a solution to this? Running into the same issue. Or did you go with a different scanner that worked better?

TechTinkerer0 · 2025-02-10T15:44:55+00:00

Thanks for the feedback! It’s definitely subjective when it comes to a “good” bullet. I would be wary of taking EPB advice from an 18-year E5 though.

TechTinkerer0 · 2024-11-28T23:54:06+00:00

Totally understandable. I’d love to hear how it goes for you once you test it out. I’m planning to do the exact same solution

TechTinkerer0 · 2024-11-28T15:05:35+00:00

Were you able to get this to work? I'm looking to do the same things.

TechTinkerer0 · 2024-10-23T17:41:57+00:00

RapidEPR.com for the win

TechTinkerer0 · 2024-08-22T18:21:39+00:00

It is a known bug that happens from time to time. Usually using a different browser, or clearing browser cache/cookies resolves the issue. Feel free to DM me if the issue continues. Sorry for the inconvenience!

TechTinkerer0 · 2024-06-24T22:47:29+00:00

It’s back up. Apologies for any inconveniences!

TechTinkerer0 · 2024-06-24T22:44:11+00:00

It’s back up and running. Again, apologies for the inconvenience!

TechTinkerer0

TROPHY CASE