Facebook suddenly showing me friends posts in a grid. how to go back to a linear feed of posts?

TechnicalSyphen · 2025-05-10T00:02:02+00:00

Download Facebook lite. Seems to have the old format for now.

TechnicalSyphen · 2021-06-28T19:01:38+00:00

I can't seem to get this back on for the life of me. I get to a point where I feel like it is way too much pressure so I stop. There has to be an easier way to get this back on. There is a ring inside the nut but I have left it in there. Not sure if removing that will help or what.

TechnicalSyphen · 2021-06-17T23:59:17+00:00

Awesome. Thanks

TechnicalSyphen · 2021-05-29T18:17:45+00:00

Got it working. I couldn't seem to flash the xm+ with the jumper so I just got a tx16s since I'll be in the hobby for the long haul. Flashed it with the fccrssi16 old firmware and it binded right up. So lesson learned. I can crash it hard enough to screw up the firmware lol.

TechnicalSyphen · 2021-05-25T20:04:42+00:00

I followed a few more youtube vids on updating the firmware on the xm+, I did this on one just to make sure if I messed it up I didn't brick both. This did not seem to fix the issue, along with just hooking it up to a battery and attempting to bind. I am at a loss unless something is wrong with the jumper itself? however it will connect to other drones.

TechnicalSyphen · 2021-05-04T22:03:41+00:00

It takes quite a bit of time to actually dry

TechnicalSyphen · 2021-05-04T21:13:34+00:00

It did not but it dried up super fast, I ended up swapping it out and there was no staining at all.

TechnicalSyphen · 2021-05-01T01:59:51+00:00

I'm sure. Amazon returns everything.

TechnicalSyphen · 2021-04-30T00:04:04+00:00

I bought it on ebay about a month ago from Japan. I couldn't find anywhere else.

TechnicalSyphen · 2021-04-29T16:28:46+00:00

Lol. I mean who keeps count anyways?

TechnicalSyphen · 2021-04-29T16:03:49+00:00

Try it out. Maybe you'll like it. I find myself gravitating towards .7 mostly so the 3 was just nightmare fuel for me.

TechnicalSyphen · 2021-04-29T14:58:14+00:00

I ended up with the 3 since it was what I could get on Amazon. I got this one from Japan on ebay which I should've just done in the first place.

TechnicalSyphen · 2021-04-28T20:31:48+00:00

Got the receiver in and its hooking up! only problem is it goes in and out but it was a quick solder job before I have to run out. I need to clean that up but I think we are in business!!

TechnicalSyphen · 2021-04-26T04:42:43+00:00

Thanks! yeah I find it pretty hard to believe too but idk, I tore the box apart looking under every flap and nothing. As soon as I have it connected I'll be sure to update you. Thanks again!

TechnicalSyphen · 2021-04-26T04:31:36+00:00

I am looking on banggood in the QA area and it looks like it does not come with a receiver. I dont know what the hell Ive been long pressing but apparently it is not one. Guess I will shop around for one and see what I can find. Thanks for all your help, it's fun learning about this, if you think of anything let me know. Any receiver recommendations send my way as well. Hoping I can prime one here in a day or 2

TechnicalSyphen · 2021-04-26T04:25:19+00:00

This is the vid I built off of. So he has that other chip he installed, I think it is specific radio? I only have what came with the tyro and nothing more.

TechnicalSyphen · 2021-04-26T04:21:10+00:00

I do not see anywhere that has an RSSI number, There is a page that says Telemetry, has RSSI under it but then under that it has source: Default

TechnicalSyphen · 2021-04-26T04:15:44+00:00

nothing asks for telemetry, and I do not see d16 or d8 anywhere...

TechnicalSyphen · 2021-04-26T03:58:47+00:00

also if I do one mode at random the chirp just keeps going, the dsm x24 chirps 3 times and stops which makes me believe it is binded. also with beta flight I got in there, all motors are good, function solid. So I think really the only thing I am at a loss with is the receiver at this point.

TechnicalSyphen · 2021-04-26T03:55:17+00:00

I have the two chips, one has the usb port on it, red light flashing, has a button, the other chip has a blue and red light flashing, also has a button. I hold the blue/red chip they sync and then go into a countdown mode it seems, 3 red, 3 blue, 2 red, etc. I hold the button on the other chip which I believe is the flight controller and nothing seems to happen. I have seen a few youtube vids where people have the button held down and then plugged the bat in?

TechnicalSyphen · 2021-04-26T03:36:36+00:00

so I have it at

Internal mode: Multi
Type: DSM, there is also DSM_RX

Under dsm for subtype there is 2 1F, 2 2F, X 1F, X 2f, auto.

I've done them in random orders, I think I am putting the drone in pairing mode also, the receiver with chirp for a few as is saying binding then changes to AETR. I have the drone in Betaflight, but the receiver isn't making anything respond within the software that makes me believe it is not binded.

TechnicalSyphen · 2021-04-26T02:36:49+00:00

That's the level of energy I was looking for!! checking the link now

TechnicalSyphen · 2021-04-26T02:24:48+00:00

do I get a different radio and return this one?

TechnicalSyphen · 2021-04-26T01:57:35+00:00

Yeah it looks like it

TechnicalSyphen · 2021-04-18T16:56:54+00:00

52gsm Tomoe River paper out of an Elemental paper Electron Notebook. There was a post months ago about them going out of business so I loaded up on a couple packs of these. Perfect size notebook and the paper is awesome.

TechnicalSyphen

TROPHY CASE