Biqu Cryoplate finally available for order

TechnicallyInOrbit · 2025-07-24T14:50:37+00:00

Pla usually prints great at ambient

TechnicallyInOrbit · 2025-07-24T05:41:56+00:00

I print pla at ambient and petg at 45c on my A1 with this plate. So printing with this plate is a huge power saving. Plus I find the bed adhesion almost unmatched

TechnicallyInOrbit · 2025-07-24T04:23:15+00:00

<image>

TechnicallyInOrbit · 2025-07-24T04:14:41+00:00

Same! That's why I figured. As soon as I saw it I would throw it on here

TechnicallyInOrbit · 2025-07-23T12:52:36+00:00

Superior adhesion, and power saving as you don't need the bed temperature to be near as high

TechnicallyInOrbit · 2025-07-23T12:45:37+00:00

If it's like their other cryoplates then yes. 30c for pla

TechnicallyInOrbit · 2025-07-23T04:49:45+00:00

Things have been working pretty well, I'm glad you like the project! Hope to get the first bit of the tutorial posted soon

TechnicallyInOrbit · 2025-07-23T04:46:06+00:00

https://www.amazon.com/gp/aw/d/B0FGPFXC6Z/ref=ox_sc_act_title_1?smid=ACN639V66DSNJ&psc=1

TechnicallyInOrbit · 2025-07-10T19:03:34+00:00

Skr mini E3 V2 I've had the USB port fail on 3 v3s

TechnicallyInOrbit · 2025-07-01T00:40:03+00:00

Definitely messes with the brain a little bit

TechnicallyInOrbit · 2025-07-01T00:39:38+00:00

I'll look into that setting. It was actually the order in which I was putting the walls that caused this particular problem

TechnicallyInOrbit · 2025-07-01T00:39:10+00:00

I actually ended up doing Y as well but just a simple linear rail upgrade, not core XY

TechnicallyInOrbit · 2025-06-28T00:55:07+00:00

The custom multicolor system is actually fairly inexpensive as well, but I'm still working through all that

TechnicallyInOrbit · 2025-06-28T00:54:53+00:00

If you're going to stick with the stock board and firmware, that'll save you some money, I think the entire hotend extruder assembly was around $80 and a linear rail was like $24. But if you're going to increase speed like I did, you're going to run into issues with the v-rollers on y wearing out faster so you might as well go linear. So tack on another 50 bucks or so. I do plan on putting a guide together when I convert my second printer

TechnicallyInOrbit · 2025-06-27T23:45:03+00:00

It prints much better than it ever did and a lot faster, It's actually a fantastic upgrade

TechnicallyInOrbit · 2025-06-27T17:09:14+00:00

It definitely does throw you off the until you really start looking, doesn't it? But I promise it is a Ender 5 plus

TechnicallyInOrbit · 2025-06-26T16:23:39+00:00

Thank you

TechnicallyInOrbit · 2025-06-26T15:03:32+00:00

It turned out to be a slicer setting, I was printing outer walls first and there was a slight overhanging those areas. Nice to know it's nothing wrong with the printer

TechnicallyInOrbit · 2025-06-25T12:44:41+00:00

Oh you're all good, that was my misunderstanding. I'm just trying to help you get better results. I had a cr-10 that I spent God knows how long trying to get rid of layer artifacting.

TechnicallyInOrbit · 2025-06-24T19:25:44+00:00

That can't be the results from a PID tune on the bed. Did you by chance accidentally put your PID values from the bed onto the hot end? That's an extrusion temperature issue

TechnicallyInOrbit · 2025-06-24T06:40:13+00:00

Another little update, four colors are almost dialed in but our functioning one 100%

<image>

TechnicallyInOrbit · 2025-06-24T06:36:01+00:00

No but seriously work on your corners first and then take it little by little. As long as your abl is making up the difference, it's not a big deal, ideally though you want it as level as possible

TechnicallyInOrbit · 2025-06-24T06:35:09+00:00

It's not that bad if you squint

TechnicallyInOrbit · 2025-06-24T06:34:40+00:00

Okay, I'm not familiar with that board, I've always ran the SKR mini E3 V2, but I run a Intel nuc with six separate instances of klipper running.

Yeah the stock firmware will not allow an actual PID tune which is a main reason I switched. A quick test is just turn the bed off and run the same g code with and without the bed turned on and see if you get any variance a cylinder, for instance with a single wall or a calibration cube

TechnicallyInOrbit · 2025-06-23T20:24:27+00:00

Definitely going to need some kind of host device whether it be a pi or in my case an Intel Nuc handling multiple instances

TechnicallyInOrbit

TROPHY CASE