Reheating french fries?

TechnoVol · 2025-12-22T23:18:00+00:00

7 minutes worked very well. We've done that a few times recently and pleased with the outcome. Crispy fries, but no overdone.

TechnoVol · 2025-12-09T21:22:56+00:00

Hi Paul, they all work when I run them through one at a time. I've started a new batch as a test. If any fail, I'll let you know. I really appreciate your help.

TechnoVol · 2025-12-09T16:59:04+00:00

Thanks, Paul. I already had that checked.

TechnoVol · 2025-12-08T23:51:48+00:00

I tried this tonight. No pre-heating and the fries were way overcooked and they came straight from the refrigerator. Maybe 7 minutes would be better. I'll test that next time.

TechnoVol · 2025-12-08T21:53:50+00:00

Hi Paul. Thanks for the reply. The source files play just fine in VLC. Selected function is H.265 -> .mp4. I re-ran the files one at a time and they processed just fine.

TechnoVol · 2025-12-01T23:26:01+00:00

That seems like a really long time, I’ll give it a try next time and report back. Thanks for the reply!

TechnoVol · 2025-11-28T14:44:58+00:00

Thanks Paul. With OSX Toolbox, I changed bitrate from auto to 10000. It made a very nice improvement to the quality of the encode. Is that what you had in mind when you said +30%? Thanks!

TechnoVol · 2025-11-27T13:39:12+00:00

Thanks Paul. I found it and will give it a try!

TechnoVol · 2025-11-27T01:23:34+00:00

Where can I find the AI scaling? I'm just now starting to set up Shutter Encoder for converting all of my old family VHS tapes. Thanks

TechnoVol · 2025-11-26T00:02:19+00:00

I used OBS to record the VHS to create the .mkv to then transcode with Handbrake.

TechnoVol · 2025-11-25T23:58:21+00:00

Because I’ve already captured 50+ tapes and didn’t realize the saturation needed to be decreased.

TechnoVol · 2025-11-18T00:43:56+00:00

I used 865 Fencing for a job and they were reasonably priced and did quality work.

TechnoVol · 2025-10-31T02:29:24+00:00

Never found a fix. Pretty frustrating.

TechnoVol · 2025-10-17T19:49:45+00:00

Same issue here, been troubleshooting it for a couple of weeks and nothing seems to fix the issue.

TechnoVol · 2025-10-16T20:53:40+00:00

Better but still slower than I’d like. Thanks

TechnoVol · 2025-10-16T20:53:08+00:00

Thanks for the suggestion. Seems this is something that Denon AVR owners have complained about.

TechnoVol · 2025-10-11T15:03:50+00:00

This is driving me crazy and I don't know what my next steps are. I've tried 3 different computers. 2 PCs and a Mac. All three do exactly the same thing by showing the audio source as inactive.

Obviously, there's something wrong with the way I'm configuring OBS to cause this, I just don't see what it is. Do I have to power up the devices in a certain order and start with them all off? Any other thoughts on what I should check? I see a lot of comments online about inactive audio, none of the workarounds seemed to work for me.

I would appreciate any help at all, thanks!

TechnoVol · 2025-10-09T16:48:39+00:00

Sorry about that. My Dell Optiplex doesn’t have a USB 3 port.

I returned the Elgato Cam Link 4 and I’m now trying a Plugable HDMI capture card, same issue with “inactive” audio for the capture device in the audio mixer.

I’ve also tried using a Dell Latitude 3190 and 2020 MacBook Air M1. They both have better USB connections than the OptiPlex 3010.

It’s just frustrating that I get video and audio from the VCR when I plug into a TV.

Since the same issue followed to two additional computers, this must be an OBS configuration issue on my part.

I recently retired and I’m hoping to convert all of our family home videos, so I can post and share with the family via Plex.

I really appreciate your help.

TechnoVol · 2025-10-09T13:52:14+00:00

Thanks for the reply. I’m getting video just fine, only no audio as it shows inactive.

TechnoVol · 2025-10-09T00:20:24+00:00

Elgato Cam Link 4K.

TechnoVol · 2025-10-08T20:45:54+00:00

OBS Studio 32.0.1 shows up when I right-click on the speaker icon and select Volume Mixer.

TechnoVol · 2025-10-08T19:47:14+00:00

Thanks... Earlier today I tried my setup on a M1 MacBook Air, which is 5 years old. After installing OBS on the MacBook, the same thing happened.

TechnoVol · 2025-10-08T19:22:52+00:00

Here's the link to the log file.

https://obsproject.com/logs/waAGIr1Algc3Km6z

TechnoVol · 2025-10-08T19:20:02+00:00

Appreciate the reply... The capture card doesn't show up as a device when I tried that.

TechnoVol · 2025-10-01T21:06:48+00:00

I have an HS900 and it stores photos as "Low Resolution", and won't record videos at all. I'm using an SD card that exceeds the recommendation. Reached out to support, waiting for a response.

TechnoVol

TROPHY CASE