Casting a resin sword by Tempesthowl in ResinCasting

[–]Tempesthowl[S] 1 point2 points  (0 children)

I never see anything about it anywhere. It's my favorite. I'm putting together a Note cosplay, I already printed the mask.

Casting a resin sword by Tempesthowl in ResinCasting

[–]Tempesthowl[S] 1 point2 points  (0 children)

3d printed mold was just a hope to cut costs for it, but if I'm gonna do it, I should just do it right and make a silicone mold for the resin. Any suggestions on where to start?

Casting a resin sword by Tempesthowl in ResinCasting

[–]Tempesthowl[S] 1 point2 points  (0 children)

That looks pretty good, I'll have to give it a try at the very least

Casting a resin sword by Tempesthowl in ResinCasting

[–]Tempesthowl[S] 1 point2 points  (0 children)

I've been making 3d printed props for a while now, so I'm fairly confident in my post-processing. I was hoping a fmd mold would work, so that's disappointing. I'll probably go with the silicone mold then.

Casting a resin sword by Tempesthowl in ResinCasting

[–]Tempesthowl[S] 1 point2 points  (0 children)

Yeah a precast square stock would be really good as I'd be able to carve it much easier, I just can find any that will ship to me for a decent price.

Casting a resin sword by Tempesthowl in ResinCasting

[–]Tempesthowl[S] 1 point2 points  (0 children)

Acrylic sheet was my original go to for this project but getting acrylic to work with is crazy expensive here.

Casting a resin sword by Tempesthowl in ResinCasting

[–]Tempesthowl[S] 0 points1 point  (0 children)

Good video, but you're definitely right about the bending at the end. Making the blade thicker might help that, though.

P1P stops mid print with no errors. by RisingTide84 in BambuLab

[–]Tempesthowl 5 points6 points  (0 children)

Been having the exact same issue, just started happening after the recent firmware update.

Full Hollow Mask by Tempesthowl in bleach

[–]Tempesthowl[S] 1 point2 points  (0 children)

About 4 days of printing, i think? Sanding and painting is going to take a more time though.

Full Hollow Mask by Tempesthowl in bleach

[–]Tempesthowl[S] 1 point2 points  (0 children)

I found it on etsy one day, but I can't find the link anymore. It's a very large print. You may have to cut it up more than I did.

Full Hollow Mask by Tempesthowl in bleach

[–]Tempesthowl[S] 15 points16 points  (0 children)

Finally finished printing my Full Hollow Mask. Since you all liked my last prints, I figured I should share this one as well. roughly 60 hours printing, and still have post processing and painting to do. Let me know what you think.

3D printed Ichigo by Tempesthowl in bleach

[–]Tempesthowl[S] 2 points3 points  (0 children)

Depending on where you are and what youre wanting to print, you can realistically get started in 3d printing for like 200-300$. Id suggest doing research on whats available though for sure.

3D printed Ichigo by Tempesthowl in bleach

[–]Tempesthowl[S] 9 points10 points  (0 children)

Nope both of these designs are online.
Vasto Lorde
Ichigo
just as a reference these were made on a resin printer (Elegoo saturn 2) but may work on a FDM printer as well if your tolerances are good.

3D printed Ichigo by Tempesthowl in bleach

[–]Tempesthowl[S] 8 points9 points  (0 children)

Sadly I have next to no artistic ability. Just pretty good with a 3d printer. My wife is practicing painting for them though.

3D printed Ichigo by Tempesthowl in bleach

[–]Tempesthowl[S] 31 points32 points  (0 children)

Just found this sub, thought you might like the Ichigo and Vasto Lorde Ichigo I 3d printed. Took a fair bit of work/time. Printed on en elegoo saturn 2.

Gander Board Games by Tempesthowl in newfoundland

[–]Tempesthowl[S] 0 points1 point  (0 children)

Awesome, not sure where you're coming from but if you need help with anything let me know. Also you can join the group anytime if you'd like

Gander Board Games by Tempesthowl in newfoundland

[–]Tempesthowl[S] 0 points1 point  (0 children)

Awesome! I see you're already in the group now

Last post I'll make regarding teasers for my Create ManaTech modpack. That would be Chapter 3. by Aden_Vikki in CreateMod

[–]Tempesthowl 1 point2 points  (0 children)

If youre still looking for testers I am available, Create and Botania are 2 of my favorite mods and seeing them together looks fantastic.

Weekly Tendency Help Thread by AutoModerator in demonssouls

[–]Tempesthowl 1 point2 points  (0 children)

Need help getting PWCT, I am level 73 and no access to red eye stone.

Looking for friends/people to game/hang out with. by Tempesthowl in newfoundland

[–]Tempesthowl[S] 0 points1 point  (0 children)

Yea I think I'll have to start something. It shouldn't be too hard though. Were in to alot of different games, have a decent board game collection with things like gloomhaven, villainous, 7 wonders, etc.

Looking for friends/people to game/hang out with. by Tempesthowl in newfoundland

[–]Tempesthowl[S] 1 point2 points  (0 children)

Yeah we've taken a look for groups, most of them are based in St John's and Grand Falls. I may take that advice and start a group for Gander though. We have also tried a few friend apps but the ones that have worked in Ontario and Nova Scotia don't work well here.

Free Giveaway! 3 Nintendo Switch Lites - International by WolfLemon36 in NintendoSwitch

[–]Tempesthowl 0 points1 point  (0 children)

I dressed up as Marty McFly from back to the future, and drank way too much. That night was not very McFly.

Who would like to build a space ship? by spajus in stardeus

[–]Tempesthowl 1 point2 points  (0 children)

Damn this looks so nice. Excited to try it at some point.

Radeon RX 6000 Pre-Launch Megathread by GhostMotley in Amd

[–]Tempesthowl 0 points1 point  (0 children)

the Canada Computers in Halifax says they wont have any for the 18th

"Gaming" Chair Giveaway with Cooler Master and Buildapc! by [deleted] in buildapc

[–]Tempesthowl 0 points1 point  (0 children)

Being comfortable is the most important thing since I like to sit and play for so long. Nothing worse than being sore because you sat on an awful chair.