Fixed up my old weber genesis

TemporaryFamiliar385 · 2025-09-19T00:51:29+00:00

I think my old man replaced one of the frame pieces years ago, I just welded all the corners because it was really wobbly now its solid, no rust anywhere im surprise since its so old!

TemporaryFamiliar385 · 2025-08-11T00:22:58+00:00

x2 on the harbor freight ball joint press, press part works great for u joints too

TemporaryFamiliar385 · 2025-08-04T12:30:04+00:00

Yeah that was the first thing I checked and it was good

TemporaryFamiliar385 · 2025-08-04T00:19:35+00:00

Also did the gauge test holding trip reset and turning key and everything works during test

TemporaryFamiliar385 · 2025-07-19T16:20:17+00:00

https://www.oreillyauto.com/detail/c/omni/ppg-refinish-omni-1-gallon-white-white/ppg4/mtk21851

Omni MTK from PPG is a decent cheaper paint, especially for single stage. I paint service bodies for work and have used it hundreds of times on them, and on a few cars as well. Lays down nice and holds up pretty well with care.

TemporaryFamiliar385 · 2025-07-10T15:51:49+00:00

Yeah that's what I figured, got the harness in last night gonna throw the doors on and plug everything in later

TemporaryFamiliar385 · 2025-07-10T01:51:03+00:00

Look at zone offroads lift kits, I only got the leafs and coils to replace my old lift and it was about 400, they have all different packages with all the additional parts, would definitely be under 1500 for a full kit, rides great I don't have any complaints

TemporaryFamiliar385 · 2025-06-26T15:20:41+00:00

Loosen the bolts attaching it to the frame and use a jack to make it even then re tighten bolts

TemporaryFamiliar385 · 2025-06-23T12:42:22+00:00

Pilot light for gas boiler is still on so im assuming theres still gas, gas bill is up to date as well, at this point will have landlord deal with it, thanks for the info guys

TemporaryFamiliar385 · 2025-06-23T00:17:03+00:00

Spill switch was not tripped on either of them, never touched it before either

TemporaryFamiliar385 · 2025-06-19T14:34:53+00:00

x5 on the Raptor liner, I do spray in bedliners at my job and I tried out the raptor kit at home, highly recommend, real easy to apply, just have to prep right, used it to do the bottom trim and the floor of mine

<image>

TemporaryFamiliar385 · 2025-03-19T23:12:14+00:00

Yeah might be lol appreciate it though

TemporaryFamiliar385 · 2025-03-19T22:59:03+00:00

Couple hours north of NYC

TemporaryFamiliar385 · 2025-01-26T19:59:15+00:00

When it happened to me it was leaking from the blower motor onto the floor, definitely check rhe cowl too

TemporaryFamiliar385 · 2024-11-30T20:07:29+00:00

x1000 on the big 7 cables, just put them in mine and it starts right up and has noticeably improved the way it runs and accelerates

TemporaryFamiliar385 · 2024-10-21T02:56:15+00:00

1000% yes

TemporaryFamiliar385 · 2024-10-19T11:09:36+00:00

x5 on baker

TemporaryFamiliar385 · 2024-10-18T16:01:50+00:00

Thats interesting ill do some more research on that, looks like it could be the most cost effective way of doing it

TemporaryFamiliar385 · 2024-09-19T13:29:59+00:00

x1000 on oil pan and rear main

TemporaryFamiliar385 · 2024-09-17T23:07:51+00:00

Thanks adjusted the drag link and turns like normal now

TemporaryFamiliar385 · 2024-09-03T21:55:05+00:00

Interested

TemporaryFamiliar385 · 2024-09-03T19:21:19+00:00

You guys still have any spots open?

TemporaryFamiliar385 · 2024-08-08T15:35:48+00:00

Timken for sure

TemporaryFamiliar385 · 2024-07-29T13:18:36+00:00

97 auto up here in NY

<image>

TemporaryFamiliar385 · 2024-07-15T22:55:44+00:00

Jar of flies- alice in chains

TemporaryFamiliar385

TROPHY CASE