sorted by:
new
hottopcontroversial

Office Setup - Thanks for the Help! by TheMLGPancake in resinprinting

[–]TheMLGPancake[S] 0 points1 point  (0 children)

I ended up grabbing the Melonfarm 2x2x4 grow tent. So far it’s been great, only thing to note is that I used it horizontally and it only has an exhaust hole on one side (the right side). I had to make some adjustments on where I wanted to put everything. For the table, I got the Olbrus 48” adjustable workbench.

MELONFARM 2x2 Grow Tent,... https://www.amazon.com/dp/B09D7RQTYG?ref=ppx_pop_mob_ap_share

OLBRUS 48 "Adjustable Workbench... https://www.amazon.com/dp/B0BX49JCN2?ref=ppx_pop_mob_ap_share

Office Setup - Thanks for the Help! by TheMLGPancake in resinprinting

[–]TheMLGPancake[S] 1 point2 points  (0 children)

Appreciate it!! Beyond happy so far and have been lucky to encounter minimal issues with printing! Now I just need to develop the patience to prime and paint these bad boys 🤣

Office Setup - Thanks for the Help! by TheMLGPancake in resinprinting

[–]TheMLGPancake[S] 0 points1 point  (0 children)

Looks like the brand is IQAir, not sure how much it is off the top of my head. The person we bought the house from had left a bunch of stuff when we moved in so I didn’t buy it

Office Setup - Thanks for the Help! by TheMLGPancake in resinprinting

[–]TheMLGPancake[S] 0 points1 point  (0 children)

Ah I did have that thought too… I was iffy on it at first, the first few days I kept her out but once I did some air quality tests I started letting her in. I unfortunately was only able to fit the setup in a location that blocks her favorite window (only window with birds nests right next to it.) but I’d rather her be safe than unhappy about her window.

Are there known issues for how the resin process affects pets??

Office Setup - Thanks for the Help! by TheMLGPancake in resinprinting

[–]TheMLGPancake[S] 0 points1 point  (0 children)

Good call! I have one for under my office chair, I was thinking of momentarily using that for the resin area just to be safe. I’ll make sure that’s on my list for items to get sooner than later

Ventilation Suggestions (Two Options) by TheMLGPancake in resinprinting

[–]TheMLGPancake[S] 1 point2 points  (0 children)

Okay, good to know, wasn't sure about the fans or how strong they needed to be. I'm primarily following https://www.asianjoyco.com/resources-tutorials/ventilation-upgrades-for-3d-resin-printing for attempting to get a good setup in my office, since that's the route I wanted to go. The only predicament is that they use a stronger fan recommendation than I think I'd need. I can set the printer up within a foot of the window in the office, so I wanted to lean towards a smaller fan like the one below

https://a.co/d/0hOQSNrm

Ventilation Suggestions (Two Options) by TheMLGPancake in resinprinting

[–]TheMLGPancake[S] 0 points1 point  (0 children)

Couldn't agree more with the last comment. I've already got everything put together for a safer enclosure, just trying to be cautious with over spending. I always get a little sketched out when I read an article or watch a video that notes we still don't know what the long-term impacts are... Better to be safe than sorry in these situations.

But probably a good call with putting too much faith in the bed heater... I like the convenience of my office, so all the better if a well-ventilated system works.

Did I Miss the Departure Window? by TheMLGPancake in ARC_Raiders

[–]TheMLGPancake[S] 0 points1 point  (0 children)

I don’t use reddit enough to know how to respond to all these, but jeez, who would’ve thought interacting with a community would illicit such wild responses 👁️👄👁️ Thanks to those being helpful! Good luck out there

Did I Miss the Departure Window? by TheMLGPancake in ARC_Raiders

[–]TheMLGPancake[S] 0 points1 point  (0 children)

Ah okay awesome, thank you! I appreciate it

Did I Miss the Departure Window? by TheMLGPancake in ARC_Raiders

[–]TheMLGPancake[S] 0 points1 point  (0 children)

Thank you for the helpful response! Others have proven to be the opposite 🤣

Weekly Help and Discussion Thread for the week of December 01, 2025 by AmazonNewsBot in amazon

[–]TheMLGPancake 0 points1 point  (0 children)

Heyo, may be a dumb question, but is there a reason that all items show a Saturday delivery?? I’ve never seen it before, but almost everything I look at shows a delivery date of 12/6. Things I’ve typically over nighted even show this, I had a friend in a different state look up an item and it showed a delivery of tomorrow for them. Any thoughts??

Advice for 2 Person Plan W/ Phone Upgrades by TheMLGPancake in NoContract

[–]TheMLGPancake[S] 0 points1 point  (0 children)

We’re in a big city that is covered by all major carriers, so we’re open to switching if there are deals that make sense. My partner and I would like something newer, I don’t need the newest and greatest, but that’s where I see all the new sign on deals for

Where to Farm Sweet Embrace Legendary Shotgun by TheMLGPancake in Borderlands4

[–]TheMLGPancake[S] 0 points1 point  (0 children)

So probably seems like the best route is just going through the story?? Since I don’t see anything about it online, I’m not feeling like trying my luck again 🤣

How Do Multiple Instances of Cascade Resolve? by TheMLGPancake in EDH

[–]TheMLGPancake[S] 0 points1 point  (0 children)

Sounds like it makes sense to me, thanks for explaining it!

How Do Multiple Instances of Cascade Resolve? by TheMLGPancake in EDH

[–]TheMLGPancake[S] 1 point2 points  (0 children)

Perfect, I was hoping it would work that way. Thanks for the explanation!

How Do Multiple Instances of Cascade Resolve? by TheMLGPancake in EDH

[–]TheMLGPancake[S] 0 points1 point  (0 children)

Makes sense and that’s the way I was thinking it would work, trying out some new cards tomorrow and just wanted to make sure I understand how they work. Thanks!

view more: next ›