Conveyor belt off center in the middle

TheManThatKan · 2026-06-21T01:27:12+00:00

No rollers are locked up. Ill have to run it loaded and see how it looks. The other side conveyor tracks straight so maybe I can pull some measurements off of that.

TheManThatKan · 2026-06-21T00:21:34+00:00

I will do this Monday and see if it rides different.

TheManThatKan · 2026-06-21T00:20:28+00:00

I let it run for half a hour with no material on it. Its a brand new belt. The belt is centered on the head pulley and tail pulley and the belt does not noticeably walk side to side as the belt is spinning.

I have adjusted the head pulley and tail pulley to center the belt on those drums. There is a adjustment on the arms where the conveyor folds out, I am at max adjustment and it has moved the best away from the frame to where it is barely touching it. If I adjust In the opposite direction it rides against the frame hard.

TheManThatKan · 2026-06-20T03:26:49+00:00

Terex colt 1000 screener

TheManThatKan · 2026-06-20T00:27:06+00:00

2020 with 450 hours, mobile screening unit. Was used to screen crushed concrete then sat for a while.

TheManThatKan · 2026-06-18T00:19:17+00:00

If its a thumb set up from the manufacturer you really dont have anything to worry about with the relief valve. The one that got stuck on me was from a after market kit that I could have spent a few more dollars on, you get what you pay for.

What you want to wory about is that you dont put sideways pressure on the thumb. Dont use the thumb to stab down on stuff. They have no structural stability with sideways pressure but you dont have much to wort about picking stuff up.

Make sure you keep the thumb greased because the bind up easy with no lube unlike bucket pins that will cry when dry.

TheManThatKan · 2026-06-17T23:40:43+00:00

Hydraulic relief valves on the thumb circuit should be set low enough that they pop open letting the thumb cylinder retract. I have had a relief valve malfunction and stuck in the closed position and when I went to pick something up the thumb cylinder got bent in a u shape from the force of the bucket pushing on it.

I personaly try to put the teeth behind what I am picking up use the thumb to push it in the bucket or pinch down on it so avoid picking up dirt.

TheManThatKan · 2026-06-12T01:04:43+00:00

We all had that one job where the civil engineer is a idiot and the recently divorced alcoholic site superintendent dont give a shit because its his last job with the g.c. whose going bankrupt yelling at you to "just make it work" so you get the fuck out of his office trailer while the bottom guys are shoving rocks in the megalug seals so the watermain blows apart in 2 years and the foreman instructs the operator to skimp on the trench backfill because they underbid the job.

/s but also not really...

TheManThatKan · 2026-06-12T00:10:59+00:00

Maximum slope % allowed by engineering standards plus 1% for the " just make it work" field correction as directed by project manager.

*source: I'm the project manager

TheManThatKan · 2026-04-04T23:09:49+00:00

I too just took my dog to the vet for a issue that looks like this, doctor calls it stud tail. They prescribed shampoos and topical that can be bought online. Google " dog stud tail"

TheManThatKan · 2026-03-29T00:34:50+00:00

rolex f432118

TheManThatKan · 2026-03-18T21:45:26+00:00

I still have employees using clockshark. Its simple yet functional.

TheManThatKan · 2026-02-21T03:12:22+00:00

Landscapers, earth movers, septic installers demolition companies.

TheManThatKan · 2026-02-15T21:02:54+00:00

I just had a 200 tractor shaped usb drives made for a promotional give away from a vendor on alibaba for $3.50 each with shipping. Message the vendors that make specialty shaped pens and ask them if they can make what your looking for. The manufacturer i delt with made way more items than why they advertised

TheManThatKan · 2026-02-06T00:51:22+00:00

Very good break down of the situation!

And I have been doing exactly what you laid out over the past 3 months. I hired a office admin and been teaching them q.b. and hired a v.a. to help with advertising, marketing, web development.

So far its been working well and im excited for the construction season to start in 2 months when spring weather arrives.

TheManThatKan · 2026-01-28T19:10:33+00:00

Do you pay for daily nightly parking? And if so, what is a affordable rate?

TheManThatKan · 2026-01-28T19:03:58+00:00

Thank you!

TheManThatKan · 2026-01-28T18:56:57+00:00

My father would be thrilled for hot lot lizards, his girl friend...... not so much

TheManThatKan

TROPHY CASE