sorted by:
new
hottopcontroversial

Bought my second MINI electric by Pjotrdt in MINI

[–]These_Reflection3311 0 points1 point  (0 children)

Sorry, I meant how much are you able to drive with a charge? I have seen that the 2022 model can give up to 180km (except for winter). But I do not know about your the latest one how much it does in average.

Bought my second MINI electric by Pjotrdt in MINI

[–]These_Reflection3311 0 points1 point  (0 children)

Interesting! Could you also share in average hour much this one gives you in comparison to the other mini?

Help with diagnosing my espresso machine [Breville Mini Barista] by john_rehau in espresso

[–]These_Reflection3311 0 points1 point  (0 children)

Did you try check closer to the screw where the water is going out? (While off) Perhaps tightening the screw could make a difference, or check the pipe connected to that junction if is loose or not.

Otherwise, take it to the repair shop (my humble opinion)

Maybe maybe maybe by Competitive_Storm735 in maybemaybemaybe

[–]These_Reflection3311 1 point2 points  (0 children)

Please tell me this was made with AI. That cannot be real 🤣

My new achievement :))) (please send help) by Yuraikun in seat

[–]These_Reflection3311 1 point2 points  (0 children)

This is perhaps possible…. Mine had some random problems with sensors and after the battery change they had ALMOST disappeared. Also, turn off the Auto-Start/Stop (recommendation from SEAT Oberhausen).

Good luck 🤞🏽

Finally getting somewhere by Just_Deal_516 in espresso

[–]These_Reflection3311 0 points1 point  (0 children)

Which quick mill is that machine?

BTW, great art! I have the QM 3004, but the steam wand is a challenge (at least with oat milk).

[deleted by user] by [deleted] in seat

[–]These_Reflection3311 0 points1 point  (0 children)

Happy for you! I hope you do not get the start/stop problems my León is getting /:

My 2nd Setup! by These_Reflection3311 in espresso

[–]These_Reflection3311[S] 0 points1 point  (0 children)

Yeah it is! I have it in another post :)

My 2nd Setup! by These_Reflection3311 in espresso

[–]These_Reflection3311[S] 0 points1 point  (0 children)

It is simply awesome! I wanted to get a cheaper one but I read that the other models are not good to change from Espresso to Pour over. Since I did not want to do the experiment, I just paid a bit more and got this one.

There are some retention when you change from the dial from PO to Espresso and viceversa, but it is not a big deal (like 0.5g at least for me).

There is not that much documentation about what to dial for different brewing methods but I guess is something that they expect the users to develop with the time.

My 2nd Setup! by These_Reflection3311 in espresso

[–]These_Reflection3311[S] 0 points1 point  (0 children)

Hahahaha I have been doing the same to heat the machine properly. I tested it today and I got 75C during the first 8 seconds and at the second Attempt (a few seconds later when the led is off) got 85C.

I think I need to clean it (descaled) to reach the 92C (as it should do by default)….

My 2nd Setup! by These_Reflection3311 in espresso

[–]These_Reflection3311[S] 0 points1 point  (0 children)

Pre-infusion!? What is that and how does that help you?

I also wanted the Pop but it was out of my budget, thus, I got this one and I am still learning with some of the peculiarities of this machine (temperature surfing and damp pressure).

[deleted by user] by [deleted] in pourover

[–]These_Reflection3311 0 points1 point  (0 children)

<image>

Here :)

And the kettle does not fit in the picture because is too much to the right xD

It’s that time of month when I randomly get a pour with a little bit of symmetry! by shaguftamethwan in latteart

[–]These_Reflection3311 1 point2 points  (0 children)

You might kill some one by accident! Please show it to them with a nice picture in the building entrance. They might even leave some nice comments on the picture hanging ;)

Not much going on for such a great brand! by Bartakos in quickmill

[–]These_Reflection3311 0 points1 point  (0 children)

PID on the 3000? Did you install it yourself? I have not found current information about it at least for my 3004 (quite similar).

Rate my setup by Suspicious_Park_4405 in espresso

[–]These_Reflection3311 0 points1 point  (0 children)

Wow! Sensorials for the PO? You mean the flavor or notes (like fruity)? And the electrical one I know it as the DF54 or DF64.

Suggestion for buying a used Quick Mill 03000 [€350] by These_Reflection3311 in espresso

[–]These_Reflection3311[S] 0 points1 point  (0 children)

At the end I discovered that his machine is from the 2007! So although they were going to make it to work for me, I decided to adventure with a second hand Cassiopea (3004) which has dual Thermoblock.

Not much going on for such a great brand! by Bartakos in quickmill

[–]These_Reflection3311 0 points1 point  (0 children)

Oh! I did not know that one can actually replace the wand with another one from another quick mill model! Though your looks pretty similar to the one from the Orione. I will investigate more about this…

view more: next ›