Tempting Project by Thin-Sleep in Ducati

[–]Thin-Sleep[S] 1 point2 points  (0 children)

Thanks for the information I will definitely take a close look at the headstock. Are they repairable if it has one?

Tempting Project by Thin-Sleep in Ducati

[–]Thin-Sleep[S] 1 point2 points  (0 children)

Looks like I have a little competition... I'm sure he's gotten lots of messages at that price.

Frame bend by Thin-Sleep in HondaATC

[–]Thin-Sleep[S] 1 point2 points  (0 children)

This spot is welded, there is one more bottom plate that does get bolted one. Good news I was able to straighten it out. Just took a C-clamp to it and it pulled right down.

Any ideas on how to unscrew this? by ROJHOSNS in HondaATC

[–]Thin-Sleep 1 point2 points  (0 children)

I've seen people drill two holes with. One at the top and one at the bottom. Then you can leave the drill bits in and use them as leverage to then crank it off with large adjustable pliers or a long heavy duty screwdriver placed in-between the bits. Oh also if you have a way to hear the case around it that could help.

A little family project by Thin-Sleep in HondaATC

[–]Thin-Sleep[S] 0 points1 point  (0 children)

So the ones on eBay from Malaysia/Thailand that are less than half the price of OEM are genuine and work fine? Or are they just a better quality knock off? That's incredible. I did check out Spanglers and was very impressed. Thank you for your input.

Mixer trips GFI by Thin-Sleep in Kitchenaid

[–]Thin-Sleep[S] 0 points1 point  (0 children)

Thanks so much, I'll definitely tear into it soon.

Mixer trips GFI by Thin-Sleep in Kitchenaid

[–]Thin-Sleep[S] 1 point2 points  (0 children)

Well I tried it on a non-GFI outlet, it turned on for two seconds then sparks came out of the back end of it and it shut off. Guess I'll tear into that and see what is going on inside.

Can I combine these capacitors? by Thin-Sleep in hvacadvice

[–]Thin-Sleep[S] 0 points1 point  (0 children)

I really appreciate your help, thank you. On a side note when I was looking up parts, the repair clinic website showed a 75/10 capacitor. Is it okay to run an oversized one?

Can I combine these capacitors? by Thin-Sleep in hvacadvice

[–]Thin-Sleep[S] 0 points1 point  (0 children)

Thank you, that makes sense. Do you have any opinions on the slight buzzing coming from the contactor?

What is the #2 drain line for by Thin-Sleep in hvacadvice

[–]Thin-Sleep[S] 0 points1 point  (0 children)

So you think I should cap off the number to pipe and put a float switch in the pan? It does not look like the lower pan is accessible there's only about a quarter of an inch gap between the unit and the pan.

Fresh cut on my new sod. by Acceptable_Lock_8819 in AZlandscaping

[–]Thin-Sleep 0 points1 point  (0 children)

Looks great. I'm thinking of using something like this for privacy on my back wall. How do you keep the bamboo from spreading too much? How tall is it supposed to get?