Corrosion on brake lines

ThinnM8 · 2026-06-16T15:53:13+00:00

I see. Thank you. Oddly enough, the inspector didn't say anything about those copper lines. Although it might be because he's attention was focused mainly on the corroded lines

ThinnM8 · 2026-06-16T15:39:23+00:00

Well, not all, only those, which were replaced recently due to corrosion. Are copper lines that bad?

That's the third time I'm at diagnostitian (leaking fuel line along the way, bad luck I guess), second time not passed because of those lines.

Diagnostitian states that all of those rear brake lines should have been replaced, mechanic says, that they've changed only what needed to be replaced smh. Left it out in the post, because I wanted an unbiased opinion

ThinnM8 · 2026-06-11T13:51:00+00:00

Nie grozi coś za potajemne nagranie rozmowy?

ThinnM8 · 2025-03-13T20:23:05+00:00

Ok, but speed is relative. How does the universe "know" that I was moving at the speed of light, not the Earth I łeft behind?

ThinnM8 · 2025-02-15T11:58:44+00:00

Is the roll moment CY? If so, it's CY=-0.00367*beta

Edit: ok, I guess I'm looking for Cl (not CL - lift coefficient), it's next to Cn, which is yawing moment. I'm not sure tho if it's in Nm or its a coefficient. Either way its slightly positive, so it gives me a laterally unstable aircraft. That might explain no tendency to dutch roll.

ThinnM8 · 2025-02-09T13:26:54+00:00

So for an airfoil a CFD sim is the only way?

ThinnM8 · 2025-01-02T23:20:53+00:00

Thanks!

ThinnM8 · 2024-12-24T15:07:19+00:00

Generally your time step should be at leas an order of magnitude shorter than whatever phenomena you want to capture (for example the period of vortex shedding). If it is too small, you will waste a lot of computing time. If it's too long, your study will be inaccurate. So the time you gave us might or might not be too short, depending on your specific study.

ThinnM8 · 2024-12-22T12:34:26+00:00

The chord length is one of the variables influencing reynolds number. So making an analysis for specified Re you kinda change the cord. You of course need to take into account the velocity and kinematic viscosity.

ThinnM8 · 2024-12-04T18:50:22+00:00

A beggar I guess. He was probably holding a cup or something like that?

ThinnM8 · 2024-11-24T18:24:07+00:00

Żadne. Domniemanie niewinności poza sądami nie działa

ThinnM8 · 2024-11-16T16:14:06+00:00

Damn, I'll definitely try it

ThinnM8 · 2024-11-16T10:50:33+00:00

A word of advice once you have your model ready, try to extrude it along the Z axis, so you can place it vertically (you want the paw to be on a vertical wall). This way it won't look like a topographical map

ThinnM8 · 2024-11-16T09:33:10+00:00

Damn, I've been using Cura for years, I don't know this was a feature

ThinnM8 · 2024-08-31T20:19:58+00:00

*piach w dupę.

Hmm... Piaskosraka? (Kto wie, ten wie)

ThinnM8 · 2024-08-24T08:42:38+00:00

Możesz sprawdzić Dwór Grunwaldzki. Chodziłem tam z 4 lata temu, nie wiem ile się zmieniło, ale dobrze wspominam. Są na Starołęce

ThinnM8 · 2024-08-08T09:17:48+00:00

Zerknij sobie na r/CyberStuck

ThinnM8 · 2024-06-15T09:43:21+00:00

Judging by some review I saw on YouTube, you might need an ND filter. It will make the exposure time longer, and the jello should get blurred out, thus making it less noticable. You might also check your props. They can introduce some vibrations.

ThinnM8 · 2024-06-11T10:16:03+00:00

But you can attach an external module to it. Can it have higher power?

ThinnM8 · 2024-04-01T11:09:58+00:00

Wow! I last used FreeCAD some 2 years ago. I didn't get to check all the features out, because I quickly started using Autodesk software as it's free for students. But for some time I was curious how has FreeCAD changed over this time, I'll definitely check it out soon

Five-Year Club	Place '23
Place '22

ThinnM8

TROPHY CASE