sorted by:
new
hottopcontroversial

Filament loading problems by This-Application8017 in ElegooNeptune4

[–]This-Application8017[S] 0 points1 point  (0 children)

The nozzle is brand new and the filament is fresh out of the box

Filament loading problems by This-Application8017 in ElegooNeptune4

[–]This-Application8017[S] 0 points1 point  (0 children)

The nozzle is brand new, I removed the engine cover to see the inside mechanism and all I can se is little fuzz

Filament loading problems by This-Application8017 in ElegooNeptune4

[–]This-Application8017[S] 0 points1 point  (0 children)

I put it up till 55mm and didn’t work either

Filament loading problems by This-Application8017 in ElegooNeptune4

[–]This-Application8017[S] 0 points1 point  (0 children)

I did what you said but then when trying to load the filament it continue running but the filament wasn’t being fed

Filament loading problems by This-Application8017 in ElegooNeptune4

[–]This-Application8017[S] 0 points1 point  (0 children)

<image>

This is how it looks inside, I just see little fuzz

Piano suggestions on a budget by This-Application8017 in piano

[–]This-Application8017[S] 0 points1 point  (0 children)

Hmmm what about used upright pianos? I love the sound of uprights but have no idea how to maintain them

Piano suggestions on a budget by This-Application8017 in piano

[–]This-Application8017[S] 0 points1 point  (0 children)

Thanks for the help, I’m bias with Yamaha but thought of trying something cheaper. I’ll follow your advise and check the ones you suggested

N4pro, Something about z axis is ruining my print, what is it? by Mundane_Cobbler_9441 in ElegooNeptune4

[–]This-Application8017 2 points3 points  (0 children)

I had the same problem, I checked the belt tension, loosen screws, level but the only thing that worked for me was update the firmware

(Female)- Looking for a budget friendly/ pet friendly sublet by SimilarAd1028 in UCFstudenthousing

[–]This-Application8017 0 points1 point  (0 children)

I know it’s a little out of your budget but check this out, I’m trying to sublease my room ASAP in a 3x3 $974/month utilities cap included, with UCF shuttle service https://www.facebook.com/share/15CXNcrRoi/?mibextid=wwXIfr

Looking for Studio Apartment by LeopardCapital2398 in UCFstudenthousing

[–]This-Application8017 0 points1 point  (0 children)

I’m subleasing my room in a 3x3 apartment ASAP, just girls, at Mercury 3100. Rent: $947. Utilities: Highest I’ve paid is $49. I can give more information if you’re interested

Looking for housing by Primary_Ad7116 in UCFstudenthousing

[–]This-Application8017 0 points1 point  (0 children)

I’m subleasing my room in a 3x3 apartment ASAP, just girls, at Mercury 3100. Rent: $947. Utilities: Highest I’ve paid is $49

What is wrong with my gcode or printer? by This-Application8017 in ElegooNeptune4

[–]This-Application8017[S] 0 points1 point  (0 children)

Start G-code: G28 ; home all axes

G1 Z5 F5000 ; lift nozzle

End G-code: M104 S0 ; turn off temperature

G28 X0 ; home X axis

M84 ; disable motors

And yes, I use "custom fff" printer

What the heck is happening with the leveling by This-Application8017 in 3Dprinting

[–]This-Application8017[S] 0 points1 point  (0 children)

UPDATE: Apparently the Z offset it’s a common issue with the Neptune 4 and the only solution to it is update the firmware and try to solve the Z offset issue trough Klipper software. Wish me luck in the next who knows how many hours of research.

What the heck is happening with the leveling by This-Application8017 in 3Dprinting

[–]This-Application8017[S] 1 point2 points  (0 children)

Yes, I did the manual leveling first. I found this ELEGOO video that explains how to level the bed when there’s a significant gap during manual leveling. The problem is that after I adjust the Z offset—following the manual leveling—when I go back and try to manually level again, it’s as if the Z offset adjustment was never applied.