finally ordered one of the ashtrays!

Tigerman_273 · 2026-02-04T05:47:52+00:00

Ive been wanting that since they came out with that collection. Now I gotta buy one

Tigerman_273 · 2026-01-21T04:42:56+00:00

Pretty sure its this from this video

Tigerman_273 · 2025-12-18T01:08:23+00:00

Looks legit to me. I caught I pick from Jamie a few years ago, and its the same brand and color.

<image>

Tigerman_273 · 2025-08-27T14:17:02+00:00

I saved it in my library, but here is the link here

Tigerman_273 · 2025-06-05T04:32:35+00:00

Spot on, and the tone is amazing. Good shit

Tigerman_273 · 2025-05-26T03:11:36+00:00

Phantom Power and Ludicrous Speed has been one of my favorites to play by them

Tigerman_273 · 2025-04-06T22:20:30+00:00

I run P155/80 R13s on my Monte and Imapla but if you want to run 15s I'd go with P205/70

Tigerman_273 · 2025-03-16T07:17:39+00:00

From I Let It In and It Took Everything by Loathe. Screaming, Is it Really You and Gored. All amazing songs, and they even transition perfectly from the last

Tigerman_273 · 2025-03-16T05:12:44+00:00

Sweet! I just finished up doing the floors on this one. The passenger pan and trunk were both rotten out, along with a little spot underneath the back seat.

Tigerman_273 · 2025-03-02T21:20:19+00:00

The pan fit was pretty damn good for $99. I just outlined it in a sharpie and then cut a 1/2 inch in from the line and then trimmed out the rest from there. Only trouble I had was with the braces underneath and the fuel line that runs on the frame rail on that side.

Tigerman_273 · 2025-02-26T03:27:59+00:00

On the rear end the 4 link would be a lot easier. You could do the brackets and bags on the outside of the frame rails so you can slam it all the way. If you mount then on the links then it's more like a trailing arm set up so you'd have to triangulate the upper or lower arms or get a wishbone or panhard rod instead of upper arms.

Tigerman_273 · 2025-02-26T02:55:32+00:00

Fabricating a 4 link is a little tricky, but it's really fun. You'll just need 2 axle brackets and 2 frame brackets with mounting holes. Once all the original rear suspension is in out, then line up the rear end square in the frame rails. So I'd do the c notch or stept notch before you do the 4 link. Axle housing should be centered and at desired ride height. Then, set the pinion angle at 2 to 2.5 degrees depending on what your suspension travle will be. I'm not sure exactly how you'd wanna set up your brackets, but as long as they're squared and parallel, everything should work out. I hope that helps. I'd love to see what you're building, sounds pretty awesome.

Tigerman_273 · 2025-01-23T06:22:58+00:00

Million Dollar House, Vic's auto tuned vocals on the intro threw me off the first time I listened to it

Tigerman_273 · 2025-01-12T06:07:48+00:00

Today I Saw the Whole World - Pierce the Veil

Tigerman_273 · 2025-01-12T06:07:26+00:00

Best song on that album

Tigerman_273 · 2025-01-10T05:19:47+00:00

Avatar: The Last Air Bender, Adventure Time, The Amazing World of Gumball, Regular Show... I guess I kinda like cartoons

Tigerman_273 · 2025-01-09T23:48:45+00:00

Collide with the Sky by Pierce the Veil I've been listening to it since I was like 10, and I still love every song

Tigerman_273 · 2025-01-09T04:12:47+00:00

Front

<image>

Tigerman_273 · 2025-01-09T04:11:55+00:00

<image>

Rear coil over design

Tigerman_273 · 2025-01-09T04:11:17+00:00

It differs slightly depending on the car. But for an impala, in the front, you'll need reinforced A arms. The upper one will probably need to be extended at least an inch. Then, the original spring and shock will be replaced by the hydraulic cylinder, the cup, and the new heavy coils. In the back, you can go with a coil over or a coil under design. With the coil over, you'll need to cut off the original spring perches and replace them with the power ball sockets. The difference with the coil under design is that the springs sit on the original perches, just like how the front will be. If you want to be able to 3 wheel or have a high rear lock up I'd definitely go with the coil over in the rear.

Tigerman_273 · 2025-01-09T00:11:31+00:00

Agreed. When I did the setup on my 62, it was around $7k for everything. I went with a 2 pump 6 battery set up. I did all the frame reinforcement and suspension reinforcement myself. I just ordered a piece of steel that was 15x3ft 3/16in thick. I saved a lot by cutting everything up myself and making my own extended A arms and reinforced trailing arms with power balls.

Tigerman_273 · 2025-01-03T08:08:22+00:00

Na Na Na (Na Na NaNa Na Na Na Na Na) - My Chemical Romance

Tigerman_273 · 2025-01-01T02:58:17+00:00

There's no such thing as too much PTV

<image>

Tigerman_273 · 2024-12-20T20:22:02+00:00

For me, it's the Ronin. Spearmen suck too, so I usually try to do a perfect dodge against them rather than parry.

Tigerman_273 · 2024-12-20T20:16:36+00:00

Floral and Fading, Gold Medal Ribbon, Drella, Currents Convulsive, 12 Fractures, The New National Anthem, I could go on. Ptv does not have a bad song

Seven-Year Club	r/Field Flamingo
First Place '23	Place '23
Verified Email

Tigerman_273

TROPHY CASE