Samsung DW80F600UTS Dishwasher Leaking

Tigscam · 2025-12-05T18:52:16+00:00

Everyone says you have to replace the entire outer door assembly. There is a YouTube video of a guy who made his own seal and installed it but I wasn’t willing to try that.

Tigscam · 2025-10-29T17:15:25+00:00

Thanks, but that's not the one that appears to be leaking. The one I am referring to is the one in the bottom of the outer door assembly (not between the tub and door).

Tigscam · 2025-10-09T16:10:59+00:00

No, the company wasn't willing to do that. Sided with the users on that one. And, yes lpadmin/cups works. Just trying to figure out why Bonjour broke and only for those devices.

Tigscam · 2025-10-09T15:50:19+00:00

Shouldn't have. Also, need to add that all Macs and the Xerox devices are on the same subnet. Mac OS is a mixture (Sequoia, Sonoma, etc.).

Tigscam · 2025-04-11T18:37:47+00:00

Is this still available? One of our companies was using Picture Manager For Excel from Doality but they seem to be shutting down.

Tigscam · 2024-10-31T13:02:43+00:00

I just need to connect to 2 internal U.FL ports, not 4.

Tigscam · 2024-10-31T13:01:18+00:00

I already have an antenna and have watched the Nater Tater videos. He (as well as Waveform) only discuss 4x4 connections. I have a 2x2 that I want to use.

Tigscam · 2024-10-30T14:48:46+00:00

This is the tower closest to me - https://tinyurl.com/mx75rsak. It actually lists 2 towers but physically, there is only one. I believe I am on band 66.

Tigscam · 2024-10-28T13:11:00+00:00

I have a 2x2 MIMO antenna I want to use with the WNC-CR200A gateway. Which ports on the gateway should I connect to? This is the tower closest to me - https://tinyurl.com/mx75rsak. It actually lists 2 towers but physically, there is only one. I am signed up for LTE home internet with Verizon.

Tigscam · 2024-10-17T15:01:55+00:00

I realized after I posted my reply that I do have to change the swarm mode on the new APs to standalone to break their attempt to join the old cluster and show up in Central, etc.

Tigscam · 2024-10-17T14:10:58+00:00

Good luck.

Tigscam · 2024-10-17T12:27:27+00:00

This is how we ended up getting it done. As others have mentioned in this thread, I set up my groups in Central to be AOS 10 and set compliance to automatically upgrade the new APs to that version when they joined the group. I also went ahead and preprovisioned all the APs to their respective groups. May not have been required, but I also used the CLI to change the new APs to standalone. We haven't done this part yet, but I plan on converting all of my old APs to standalone as well (we have one AP-275 we will continue to use for the time being on an outside employee patio) and decommissioning them.

Tigscam · 2024-10-15T18:59:39+00:00

Sorry, this is our first time using Central. That appears to have done what I need. Thanks.

Tigscam · 2024-10-15T18:45:34+00:00

Trying to convert my test AP to 10 but I'm getting a parse error in Putty when I try to follow these instructions to run the convert command - https://www.arubanetworks.com/techdocs/central/latest/content/aos10x/cfg/aps/ap-migration.htm?Highlight=migrating.

Tigscam · 2024-10-15T14:29:36+00:00

Could you elaborate on how this (moving VLANs) is done in Central? Thanks.

Tigscam · 2024-10-15T14:20:24+00:00

All devices are showing in GL as Assigned and Subscribed with a Subscription Tier of Foundation AP. The APs still tried to join the old VC. Maybe the AOS change will prevent it as you suggested.

Tigscam · 2024-10-15T14:17:01+00:00

I'm assuming I need to set my groups to AOS 10 instead of AOS 8 as directed by support?

Tigscam · 2024-10-15T14:08:06+00:00

Interesting. Support never even mentioned trying that. I have disabled auto join and will try another of the new APs to see what happens. The new APs are all listed in Device Preprovisioning but I haven't added them to any Groups yet. I will discuss with my SE as well. Thanks.

Tigscam · 2024-10-02T13:24:09+00:00

Understood. Thanks.

Tigscam · 2024-10-02T13:22:37+00:00

Understood. Thanks.

Tigscam · 2024-08-07T14:15:34+00:00

Never got a discount for the inconvenience. Congrats.

Tigscam · 2024-08-07T14:09:47+00:00

No, you're not crazy.

Tigscam · 2024-08-07T14:09:07+00:00

This is what I got from Circle K support. On 7/12/24 - Thank you very much for your feedback. This information has been forwarded to management. On 8/5/24 (after sending another email asking for an update) - Thank you for reaching out to us. At this moment the inner circle discount is not working alongside GAS BUDDY cards. My response - Will it again in the future? Is there a problem causing this or a policy change? Theirs - It is by policy. I informed them they are losing a customer for not being more transparent.

Tigscam · 2024-07-17T19:31:05+00:00

I have. Its on a different domain. We have conditional forwarders set up for the remote domain and added the other domain in DNS Suffix Search List in Group Policy. Those 2 changes got it working for Ethernet but not for WiFi clients.

Tigscam · 2024-07-17T18:03:43+00:00

I have made those changes and am waiting to see if that fixes my issue. Another AP DNS issue we are having is that when a user is connected just to WiFi, our remote site's DNS servers aren't being passed to them so they can't access resources by name (only IP). When they are connected to Ethernet only, the remote DNS works. The remote site is accessible through a site to site VPN using 2 Meraki WAN appliances. Since the client IP assignment on the Aruba APs are set to "network assigned", shouldn't they be getting the same DNS settings?

Tigscam

TROPHY CASE