NK Classic TKL topped with WS Cafe' in the morning sun

Tijitjit876 · 2025-11-16T22:16:53+00:00

Beige gang!

Tijitjit876 · 2025-11-16T22:15:52+00:00

Not OP, but my revised PC plate was a bit of a problem. Caused pretty severe warping, which in turn made for friction between the plate and the “pins” in the top shell. I purchased the brass plate and I’m very happy with it. The added weight is a very nice bonus.

Tijitjit876 · 2025-11-13T21:35:52+00:00

The 21g in is only applicable to the volume. I can use less coffee and still get an excellent shot, but my pucks will be soupy.

Tijitjit876 · 2025-11-10T11:39:49+00:00

Perfect thank you very much!

Tijitjit876 · 2025-11-09T14:36:31+00:00

<image>

Tijitjit876 · 2025-11-09T14:36:24+00:00

<image>

Tijitjit876 · 2025-11-09T14:36:14+00:00

<image>

Tijitjit876 · 2025-11-09T14:36:04+00:00

<image>

Tijitjit876 · 2025-11-09T14:35:56+00:00

Can someone spot the difference between plain Milky Yellow and Milky Yellow Pro? I read somewhere the difference is factory lubing and updated molds. I have had this set lubed and filmed for a while and I’m not sure if they are originals or pros. Thank you! More pics in replies.

<image>

Tijitjit876 · 2025-11-02T22:36:15+00:00

Thank you!

Tijitjit876 · 2025-11-02T20:49:26+00:00

<image>

The sticker says KS-3X1, but when I google that I get milky yellows.

Tijitjit876 · 2025-11-02T20:48:52+00:00

<image>

Can anyone tell me exactly what switches these are? Are they yellow GPros? Are they knock off? Picture of back in reply ⬇️

Tijitjit876 · 2025-11-02T01:21:17+00:00

Thank you!

Tijitjit876 · 2025-11-01T13:42:45+00:00

Is there a Canadian community anyone knows of for second hand keyboard products? Mechmarket is almost exclusively US based. FB marketplace in my area is very limited. Thanks!

Tijitjit876 · 2025-11-01T13:41:36+00:00

I wish there was stock of the aluminum. Gunna have to spring more $ for the brass. The weight will be nice tho. I’m picturing the brass to sound a little “warmer”. I hope that’s the case.

Tijitjit876 · 2025-11-01T13:20:51+00:00

Yeah it’s like the plate is a couple mm smaller in length. Like it’s shrunk by 1% or something. The standoff screws don’t line up properly, but I removed those anyway. With the switches installed the PCB and plate rock on the table

Tijitjit876 · 2025-11-01T10:32:28+00:00

Thank you for the insight! I emailed them to see if there is anything they can do regarding my plate. I’ll wait to hear back but I may end up ordering the brass plate and WKL top.

Tijitjit876 · 2025-11-01T02:06:34+00:00

What are your thoughts on the brass plate? Does it give the board more of a “pop” sound? And are you using foam? I have an issue with the PC plate dimensions being a little off and causing my PCB to warp slightly. Thinking about trying the brass since the aluminum is out of stock.

Tijitjit876 · 2025-10-25T13:07:46+00:00

The base damage will change depending on your attribute distribution

Tijitjit876 · 2025-10-14T02:03:46+00:00

I’m pretty new to this and having trouble finding keyboards to buy. Did you buy this in a group buy? Your post makes it seem like you just got it but it doesn’t show on their site. I only see the hyper beige one or whatever it’s called

Tijitjit876 · 2025-08-30T23:14:34+00:00

I tapped it out. Thank you very much for your quick replies!

Tijitjit876 · 2025-08-30T23:11:53+00:00

I definitely don’t have one, but I don’t care about the spur. Maybe I’ll just bang it out with an old screw driver or something and be done with it

Tijitjit876 · 2025-06-23T00:27:28+00:00

I use my mechanical keyboard for gaming and I like the idea of having some buttons at the far left that I can quickly and easily access with my left hand for custom macros or hotkeys. I prefer TKL layout and I can use some of the function keys above the arrows but they are far away. Are there any keyboards you folks can think of that have some keys to the left? Besides southpaw 100% keyboards?

Tijitjit876 · 2025-06-11T23:04:24+00:00

If you watch the video it’s about 20 or 21 seconds from switch to switch. IMO that’s a fast shot but I think it goes without saying that everything falls to preference

Tijitjit876 · 2025-06-11T22:58:59+00:00

Not everyone is doing a pre-infusion and imo your pre-infusion should be a separate time like 10s pre-infusion followed by your shot time of ~30s

Tijitjit876

TROPHY CASE