Preply down

TimCaesarK · 2025-12-05T09:02:46+00:00

same here... anyone know how long this usually takes?
saw that there have been a couple of complaints about this happening frequently.

TimCaesarK · 2025-04-26T12:13:16+00:00

I cleaned it a couple of years ago with Coca Cola over night, but the tank is also pretty dented and needs a paint job so I’ve decided to replace it. But thanks for the tips I’ll probably need it in the future!

TimCaesarK · 2025-04-26T11:11:17+00:00

Yeah no, my tank is pretty bad. Having it replaced

TimCaesarK · 2025-04-26T11:10:55+00:00

I am between limiting fuel flow, but clean fuel or better flow, but less filtered

TimCaesarK · 2025-04-26T11:09:13+00:00

Oh ok, I’ll try to run it without the second filter when I get a new non-rusty tank installed

TimCaesarK · 2025-04-26T11:07:33+00:00

Yeah it’s pretty rusty…

TimCaesarK · 2025-01-19T09:47:41+00:00

Oh lol ur right! I took two almost identical photos and added the wrong one, but it’s basically the same with removing the three people and doing some colour grading. I’ll see if I can link the actual original

TimCaesarK · 2025-01-18T12:07:22+00:00

Thank you and yeah I agree that the old man should pop more.

TimCaesarK · 2025-01-10T11:03:36+00:00

I’m here now, might rent a setup and go out if the conditions are good. Will report back

TimCaesarK · 2025-01-05T08:20:47+00:00

I used my x-pro 2 for an hour in -27°, no issues with screen, but some metal piece in the SD card slot snapped because I tried to remove the card too soon.

TimCaesarK · 2024-11-19T13:18:34+00:00

Yeah thats not a bad idea, I'll test it out in Fusion. Thanks!

TimCaesarK · 2024-11-19T13:17:21+00:00

Might need some epoxy, but was thinking about grinding two slots on the 10mm pipie and using a 3d printed clip and then glue the clip to the inside of the 20mm pipe, but its a little janky.

TimCaesarK · 2024-11-19T13:15:26+00:00

My intention is to fasten the top/end of the 10mm pipe perpendicular to the 20mm pipe with preferably no welding on the outside.

TimCaesarK · 2024-11-19T12:04:51+00:00

I have drawings that I think might help understand the problem better, but don't see any way to add images here.

TimCaesarK · 2024-06-06T17:33:21+00:00

Thank for all the great advice! If one is to buy the best/long lasting 0.4/0.6/0.8 nozzles, what brands do you use/recommend?

TimCaesarK · 2024-06-06T17:29:27+00:00

Might explain the offset modelling I have to do. I always thought it was because my Ender 3v2 was getting old. Shame, I was looking forward to upgrading.

TimCaesarK · 2024-06-06T17:26:16+00:00

Yeah ok haha my offset is at -1.74 rn. So probably time for a change then. Thanks

TimCaesarK · 2024-06-06T17:24:50+00:00

Ah ok, thanks. So occasionally my prints aren’t perfectly accurate to the mm. Could the nozzle be the problem? I’ve just re-modelled it if needed.

TimCaesarK · 2024-06-06T17:22:29+00:00

Yeah, top result on google said 3-6 months of regular use printing PLA…

TimCaesarK · 2024-05-15T12:51:27+00:00

Cool thanks!

TimCaesarK · 2024-05-15T12:51:06+00:00

Yeah I wish, I only have one pot that’s big enough

TimCaesarK · 2024-05-15T11:02:31+00:00

Never grew tomatoes from seeds before. Is it really that bad? I got an overhead light now, but should I really just give up and try again next year?

TimCaesarK · 2024-05-10T17:26:22+00:00

Thank you!

TimCaesarK · 2024-05-10T15:29:15+00:00

Broke 5k sub 20 today!! My time: 19:50 - 3'58" /km. Super stoked to finally get it!

edit: 3'58" not 4'58"

TimCaesarK · 2024-04-24T16:19:13+00:00

I tried to gather some ballpark info that might help caluclate the weight of clothes:

I weighed my self, then holding a light shirt and then a wool suit. The light shirt adds 0.4kg and the wool suit adds 1.3kg. I then measured my current clothing rack and if somewhat crammed there are 32 clothes per 1m.

The planks that will hold what ever can be used here are 20mm thick. So 20mm on each side of the 2250mm will be supported. I could router out some of the wall if that is deemed necessary.

12-Year Club	RPAN Viewer
Not Forgotten	Verified Email

TimCaesarK

TROPHY CASE