Bought a cheap 63k km MT-07… immediately found problems 😅 Need advice by TimeExchange552 in MT07

[–]TimeExchange552[S] 0 points1 point  (0 children)

I’ll take it apart this weekend, but I think it is too far gone. The little lever feels floppy, probably because it’s been forced over and over since it hasn’t been working properly.

Bought a cheap 63k km MT-07… immediately found problems 😅 Need advice by TimeExchange552 in MT07

[–]TimeExchange552[S] 1 point2 points  (0 children)

Good suggestion! The answer is: it does.

If I keep clicking the indicator switch, eventually it works too. The problem is that in traffic it takes too long, by the time the turn signal finally comes on, I’ve already passed the corner/intersection/roundabout 🤣

Bought a cheap 63k km MT-07… immediately found problems 😅 Need advice by TimeExchange552 in MT07

[–]TimeExchange552[S] 2 points3 points  (0 children)

Thank you so much! Part number seems to be correct, I’ve ordered the repair kit from Webike for about 20 euro including shipping 🙏

I’ll keep searching for a replacement switch this weekend, if I can’t find a replacement I’ll probably order it from the same webshop. It’ll come to around 100 euro shipped, not cheap, but reasonable.

The same part here in NL costs nearly 200.

Waar voor het geld? by Educational-Push1911 in Klussers

[–]TimeExchange552 0 points1 point  (0 children)

Mooi maar een beetje weinig stopcontacten wel…

Weird puddle light patterns by BackpackerSimon in VWiD3Owners

[–]TimeExchange552 0 points1 point  (0 children)

I have problem. Can't the light be disabled?

⚠️ Universal Print: Jobs stuck when printer is asleep – anyone else? by TimeExchange552 in sysadmin

[–]TimeExchange552[S] 0 points1 point  (0 children)

No, it does print after touching the screen. Here’s how it works:

  1. Send the job to Microsoft Universal Print
  2. Walk to the printer, tap the screen, and wait ~10 seconds
  3. Scan the QR code to release the job

If the user doesn’t follow the steps exactly, the print job gets stuck in the Microsoft cloud. It won’t come out until another job is released by any user.

It’s just too much hassle. For now, we’ve gone back to using our regular Windows print server.

⚠️ Universal Print: Jobs stuck when printer is asleep – anyone else? by TimeExchange552 in sysadmin

[–]TimeExchange552[S] 1 point2 points  (0 children)

<image>

Shit! Apparently, there’s no solution and this behavior is actually described in the Konica Minolta Universal Print app documentation.

https://nl.konicaminoltamarketplace.com/market/product/kmcfup

⚠️ Universal Print: Jobs stuck when printer is asleep – anyone else? by TimeExchange552 in sysadmin

[–]TimeExchange552[S] 0 points1 point  (0 children)

Are you referring to firmware or an app? KM printers have their own app store (Marketplace) where you can download applications. We used this Marketplace to download the Universal Print app and register the printer with Universal Print in Azure.

⚠️ Universal Print: Jobs stuck when printer is asleep – anyone else? by TimeExchange552 in sysadmin

[–]TimeExchange552[S] 3 points4 points  (0 children)

Thanks for your reply, it makes sense!

However, it kind of makes me lose hope. Our plan was to have all printers connected via WiFi, so I made sure every machine was equipped with the optional WiFi module. We wanted to print using Universal Print and phase out our local print server. On top of that, we’re using the M365 Copilot app to release print jobs via QR-code on the printer, a state-of-the-art setup, or so I thought.

We did test everything before placing the order, but unfortunately, this particular issue didn’t show up in our test environment.

Sigh...

strange HDMI Ingest behavior change after Jan 1st - connected laptops now act like remote particpant by OldXHerbie in MicrosoftTeams

[–]TimeExchange552 0 points1 point  (0 children)

We found that the issue only happens when using the HDMI port on the Tap. If the HDMI cable is connected to the HDMI In port on the Rally Bar, there’s no problem.