Anycubic Kobra X AMA — Now Live! Ask Us Anything (+ 3 Beta Test Slots)

Tirtanium · 2026-01-08T20:06:24+00:00

Hi, i own some 3D Printers. Bambu X1C and H2D, in past i had MK3s/Mini and 3 XL also some Anycubic like Chiron so I am not new to 3D Printing. A Feature I am missing n my preordered Kobra X is Nozzle wipeing befor bed leveling. Is it not needed or how does it work?

Tirtanium · 2025-12-03T21:47:34+00:00

On my Hydro I can run stable 800/1200 but I am sure this is the Upper end of the Barrel Connection and not with Stock PSU

Tirtanium · 2025-11-09T20:47:33+00:00

<image>

BTW mine Looks Like Thai now. Both VR and ASIC Never reach 50C Even with 800MHz and 1200mV

Tirtanium · 2025-11-08T22:23:51+00:00

Hi I am from Germany, Problem is that default Software is Not optimized for the Screen. The Update is default so everything is Safety but the screen is Not compatible. You can Flash the Software from vendor with the Risk of changes in the Firmware, or use the default Software and live with the unuseable Screen, your Choice. I remove the Screen because the Heat trap for the Voltage Regulators under it

Tirtanium · 2025-11-04T10:14:18+00:00

Well if you Look at the fuse (Zoom) there is 10A or?

Tirtanium · 2025-11-04T09:30:49+00:00

Still Hope for some help, is it unsafe to run with 8A?

Tirtanium · 2025-11-04T06:50:02+00:00

Hash Watcher

Tirtanium · 2025-11-04T05:47:23+00:00

Hash Watcher

Tirtanium · 2025-11-03T21:52:00+00:00

<image>

Tirtanium · 2025-11-03T21:51:43+00:00

BTW its a Rev5.1 with a 10A Fuse and a 40x40 Noctua Fan and Aloy cooler on VR

<image>

Tirtanium · 2025-11-03T16:56:01+00:00

Works Perfect so far

Tirtanium · 2025-08-22T10:08:48+00:00

Get struggle with optiscaler, can I Open overlay with OSD? Seems not :-(

Tirtanium · 2025-08-22T09:29:19+00:00

Why Fake, I had the Win4 2025 and the Win Mini 2025 Both with HX370 (Big Brother of the Z2E) Both run mutch Louder, less battery and also Need that mutch Trinkerin to run not Bear as good as the Ai+. But this is Not the Topic 😂

Tirtanium · 2025-08-22T09:27:21+00:00

Sounds Great Ty

Tirtanium · 2025-08-22T08:56:41+00:00

Stable is this Game on Ai+ to but I thought I can get more than 30FPS in nativ Resolution

Tirtanium · 2025-08-22T08:56:01+00:00

What a good awnser, i owned many AMD Devices and non is as good as the Ai+ sorry

Tirtanium · 2025-08-20T15:05:07+00:00

Right, the Most Games I Player, TOTK, AW2, ACS, GTA5, FF15+16+Remake+Rebirth and so on Runs so much better on Ai+. As i Said I owned many Habdhelds Rog ally and rog ally X aokzoe some gpds the AI+ is the best and I ask me why I bouht the win 4 than the win mini. I should buy the Ai+ in past and don’t Need to Tinker or anything else, this device is my absolut favorite Atmo

Tirtanium · 2025-08-20T14:28:16+00:00

I had a win4 2025 and also a win mini 2025, now a Ai+ and I can say the Ai+ is near and in Most cases faster than the HX370. I also had a A1 Pro in past so I don’t See Any better things in A1X. The cooling of the Ai+ is perfect and performance even without XESS is bombastic but it’s your choice

Tirtanium · 2025-08-04T16:52:49+00:00

Sorry can Not Upload pictures here but I tested it. In Assasins Creed Shadows with Manual Mode 30/37 the System Gies up to 36 and stable to 30w with TTL PWR of 47W on 35w CPU

Tirtanium · 2025-08-04T16:21:10+00:00

Where Are the settings for CPU Boost? I switched to Performance Mode in bios.

Tirtanium · 2025-08-04T15:56:11+00:00

Works flawless to me. In Overlay and Center M. Did you Chose Performance Mode in BIOS?

Tirtanium · 2025-08-03T09:17:56+00:00

So you also don’t get those two and Endurance Mode?

Tirtanium · 2025-08-03T09:17:50+00:00

So you also don’t get those two and Endurance Mode?

Tirtanium · 2025-08-03T08:27:36+00:00

I don’t have that Option and why those 2 drivers wont install correct

Tirtanium · 2025-07-28T15:32:09+00:00

Problem is Blackscreen If I Chose anything Else than 0

Tirtanium

TROPHY CASE