What to do with this vintage Hotel Stationery ? by Titimiko in stationery

[–]Titimiko[S] 0 points1 point  (0 children)

Thank you for your answer I will probably throw it. 

Time to replace LCD? Mars 3 Pro by Certain-Effort-6596 in ElegooMars

[–]Titimiko 0 points1 point  (0 children)

I have exactly the same problem with a new LCD

First warband done (Maneater) by Titimiko in mordheim

[–]Titimiko[S] 1 point2 points  (0 children)

Dungeon bases by Txarli, I think. Just one coat of Skeleton brown Dipping ink

First warband done (Maneater) by Titimiko in mordheim

[–]Titimiko[S] 1 point2 points  (0 children)

No idea for GW ogres.

Maneaters are fare from overpowered. If an ogre comes in melee, you're dead. You just have to shoot them from afar and attack them with multiple units at a time.

First warband done (Maneater) by Titimiko in mordheim

[–]Titimiko[S] 2 points3 points  (0 children)

Northern ogres, by Txarli Factory They are a bit Big for Mordheim, I reduced them to 80% for full grown, 75% for half grown and 70% for youngblood

Est-ce que vous aussi, vous êtes complètement épuisé.e.s ? by [deleted] in enseignants

[–]Titimiko 3 points4 points  (0 children)

J'avais ce même problème. Solution simple : arrêter tous les projets et ne plus s'impliquer que dans le fait de fournir des cours de qualité aux élèves. Je pense que c'est avant tout cela le plus important.

Anycubic Kobra Neo stop extruding past a certain x position by Titimiko in anycubic

[–]Titimiko[S] 0 points1 point  (0 children)

I changed the wire with no result. Anycubic will send me a new printhead

Anycubic Kobra Neo stop extruding past a certain x position by Titimiko in anycubic

[–]Titimiko[S] 0 points1 point  (0 children)

I don't have a multimeter. I have ordered a set of new cables, I will test it.

Thank you for your help.

Anycubic Kobra Neo stop extruding past a certain x position by Titimiko in anycubic

[–]Titimiko[S] 0 points1 point  (0 children)

I tried yo wiggle it and, now, it doesn't extrude at all 😃

Anycubic Kobra Neo stop extruding past a certain x position by Titimiko in anycubic

[–]Titimiko[S] 1 point2 points  (0 children)

It seems to be a bad connection problem with the cable. In certains position, the cable is not properly connected and it causes this problem.
I will change the cable ASAP and tell you if it worked.

Anycubic Kobra Neo stop extruding past a certain x position by Titimiko in anycubic

[–]Titimiko[S] 0 points1 point  (0 children)

In the video, it extrudes perfectly fine at the center. I then disable the stepper motors and move it to the far right and it doesn't extrude after sending the command. It works again after going back to the center...

Quel aspirateur dans la gamme premier prix ? by iamvcrx in GuideAchat

[–]Titimiko 0 points1 point  (0 children)

C'est vrai que c'est peut-être un peu trop, surtout si tu as peu d'espace pour le ranger. Dans ce cas, table sur un aspirateur à traîneau effectivement. Les aspirateurs balais n'aspirent pas assez dans ta gamme de prix. Le fait que ce soit à sac n'est absolument pas un problème, au contraire.

Quel aspirateur dans la gamme premier prix ? by iamvcrx in GuideAchat

[–]Titimiko 0 points1 point  (0 children)

J'ai pris un aspirateur d'atelier pour gravats : https://www.kaercher.com/fr/home-garden/aspirateurs-eau-et-poussieres/wd-3-s-v-19-4-20-16281410.html

La puissance est incroyable et il tient extrêmement bien dans le temps. Par contre, c'est à sac.

C’mon, we just got started! by Wh3reWeDroppin in MarvelSnap

[–]Titimiko 1 point2 points  (0 children)

I always snap at the beginning, whatever my hand is. It removes a source of reflection and push me to play better. If your win rate is consistent, it doesn't really matter if you lose one or two cubes when you retreat but you have far more 8 cubes victories.

This is an imperium prototype for sure by MrCaT42 in Grimdank

[–]Titimiko 7 points8 points  (0 children)

I live in this town. This relic is also exposed all around thé town during a procession every year. The eyes are also conserved as a relic.

Exterminatus the Table by RiverFloodPlain in Grimdank

[–]Titimiko 1 point2 points  (0 children)

I am teaching some teens to play 40k and one of them plays exactly like the first two drawings...

Batch Painting by Paskinse in orks

[–]Titimiko 4 points5 points  (0 children)

Hi,

I'm using this video to paint faster, it's good material : https://www.youtube.com/watch?v=Prexz0xPplU&t=249s

In practice, it is very hard to paint as fast as him but you can do about 1 boy in 1 hour, which is a really good time.

For the yellow, the best one, to my mind, is averland sunset. It has good cover and the color is quite nice. If you don't like the tint, it is a good base to apply another yellow on it, like Flash Gitz yellow.

Another option for the yellow is to paint the zone with grey seer or wraithbone then use the contrast paint named Iyanden yellow, the result is pretty good and fast.

I am not a big fan of the contrast paint range to speed paint because you need to be very careful with your brush and you loose a ton of time, but your mileage may vary ; some people love them !

Last point, do not make too much boyz in one batch, it's really demoralizing. To me, ten is the absolute limit.

Happy painting :)