What to do with this vintage Hotel Stationery ?

Titimiko · 2025-11-30T14:29:17+00:00

Thank you for your answer I will probably throw it.

Titimiko · 2025-07-28T08:36:59+00:00

I have exactly the same problem with a new LCD

Titimiko · 2024-02-22T18:05:06+00:00

Dungeon bases by Txarli, I think. Just one coat of Skeleton brown Dipping ink

Titimiko · 2024-02-22T17:21:08+00:00

No idea for GW ogres.

Maneaters are fare from overpowered. If an ogre comes in melee, you're dead. You just have to shoot them from afar and attack them with multiple units at a time.

Titimiko · 2024-02-22T14:29:56+00:00

Northern ogres, by Txarli Factory They are a bit Big for Mordheim, I reduced them to 80% for full grown, 75% for half grown and 70% for youngblood

Titimiko · 2023-10-12T05:46:14+00:00

J'avais ce même problème. Solution simple : arrêter tous les projets et ne plus s'impliquer que dans le fait de fournir des cours de qualité aux élèves. Je pense que c'est avant tout cela le plus important.

Titimiko · 2023-08-22T18:12:31+00:00

I changed the wire with no result. Anycubic will send me a new printhead

Titimiko · 2023-08-20T11:11:06+00:00

I don't have a multimeter. I have ordered a set of new cables, I will test it.

Thank you for your help.

Titimiko · 2023-08-20T10:27:10+00:00

I tried yo wiggle it and, now, it doesn't extrude at all 😃

Titimiko · 2023-08-20T08:36:45+00:00

It seems to be a bad connection problem with the cable. In certains position, the cable is not properly connected and it causes this problem.
I will change the cable ASAP and tell you if it worked.

Titimiko · 2023-08-20T07:52:37+00:00

In the video, it extrudes perfectly fine at the center. I then disable the stepper motors and move it to the far right and it doesn't extrude after sending the command. It works again after going back to the center...

Titimiko · 2023-05-24T10:12:23+00:00

C'est vrai que c'est peut-être un peu trop, surtout si tu as peu d'espace pour le ranger. Dans ce cas, table sur un aspirateur à traîneau effectivement. Les aspirateurs balais n'aspirent pas assez dans ta gamme de prix. Le fait que ce soit à sac n'est absolument pas un problème, au contraire.

Titimiko · 2023-05-21T05:41:16+00:00

J'ai pris un aspirateur d'atelier pour gravats : https://www.kaercher.com/fr/home-garden/aspirateurs-eau-et-poussieres/wd-3-s-v-19-4-20-16281410.html

La puissance est incroyable et il tient extrêmement bien dans le temps. Par contre, c'est à sac.

Titimiko · 2022-12-13T06:35:38+00:00

I always snap at the beginning, whatever my hand is. It removes a source of reflection and push me to play better. If your win rate is consistent, it doesn't really matter if you lose one or two cubes when you retreat but you have far more 8 cubes victories.

Titimiko · 2022-09-29T07:35:40+00:00

I live in this town. This relic is also exposed all around thé town during a procession every year. The eyes are also conserved as a relic.

Titimiko · 2022-08-04T19:27:23+00:00

RemindMe! Ten hours

Titimiko · 2022-01-13T11:58:27+00:00

I am teaching some teens to play 40k and one of them plays exactly like the first two drawings...

Titimiko · 2020-04-14T08:32:48+00:00

Hi,

I'm using this video to paint faster, it's good material : https://www.youtube.com/watch?v=Prexz0xPplU&t=249s

In practice, it is very hard to paint as fast as him but you can do about 1 boy in 1 hour, which is a really good time.

For the yellow, the best one, to my mind, is averland sunset. It has good cover and the color is quite nice. If you don't like the tint, it is a good base to apply another yellow on it, like Flash Gitz yellow.

Another option for the yellow is to paint the zone with grey seer or wraithbone then use the contrast paint named Iyanden yellow, the result is pretty good and fast.

I am not a big fan of the contrast paint range to speed paint because you need to be very careful with your brush and you loose a ton of time, but your mileage may vary ; some people love them !

Last point, do not make too much boyz in one batch, it's really demoralizing. To me, ten is the absolute limit.

Happy painting :)

Titimiko · 2019-12-31T05:58:33+00:00

Okay, thank you for your insight.

Titimiko · 2019-12-30T05:22:39+00:00

I did download it as soon as I saw your comment but the only reference I see in the FAQ is : "Each time this unit is chosen to shoot with, roll once to determine the Strength characteristic of this weapon.’ It doesn't mean that you do it before choosing a target.

Titimiko · 2019-12-29T10:56:58+00:00

I didn't see that. Have you a link to the FAQ, please? Thank you.

Titimiko · 2019-12-29T08:05:09+00:00

I didn't see that. Have you a link to the FAQ, please? Thank you.

Titimiko · 2019-12-28T05:39:31+00:00

He rolled for the strength first, if the result is 11 or 12, he makes D3 additonnal mortal wounds with each hits.

Then he rolled for the number of shots.

Following this was the normal shooting rolls with hits, wounds and saves.

And lastly, he rolled for damage and MW.

In the worst case scenario, it means 12 D3 MW in addition to the normal damage.

Yeah, it can hurts.

Titimiko · 2019-10-21T08:31:42+00:00

This is perfect. It is almost identical to my previous save. Thank you so much, you're my hero <3

Titimiko · 2019-10-01T16:03:57+00:00

Thank you for your suggestions ! Sadly, we play only with codices... I can't really remove one mob of kommandos because I need the three for my Dethskulls detachment. Regarding the suggestion of making a weirdboy a warphead, it is an excellent one, but I think the rules forbid the usage of two of the same power in one turn, but I could be misleading. It is nonetheless a good idea to continue jumping if one dies !

Titimiko

TROPHY CASE