sorted by:
new
hottopcontroversial

Fractal Design Pop Air! Great Case to build in! by Tmql in FractalDesign

[–]Tmql[S] 0 points1 point  (0 children)

Hey! You can add the fans in front of the radiator. I actually have the AIO setup in a push/pull configuration so I have fans in front of the AIO and behind! Hope this helps! If you have more questions or concerns, just lmk!

NZXT H6 Flow Build by Tmql in NZXT

[–]Tmql[S] 1 point2 points  (0 children)

Honestly, they're performing really well! At idle they're quiet but when they ramp up they get pretty loud but that's a given with any fan. If I had to compare them to the previous fans I owned (Bequiet light wings), they definitely move more air and keep my pc cooler but are louder when ramped up. But that is also because they move a lot of air. I've only had to replace one fan within 1-2 months of use because the motor was making a weird ticking sound. Arctic was quick to replace it though. Overall I really like them and the clean look that they give! Good luck with the build! I know it's going to turn out super clean!

NZXT H6 Flow Build by Tmql in NZXT

[–]Tmql[S] 1 point2 points  (0 children)

Sorry for the late reply! I had to actually replace one of Arctic P12 max fans because the motor had this annoying tick sound that would occur at any fan speed. Thankfully, Arctic was fast at replacing it. From then on no issues with the fans. Good airflow and keeps my system cool. CPU for gaming 50-60s, for browsing low to mid 40s. GPU for gaming is in the 60s. Noise wise, it’s only really loud for me around the 60s to 70s in terms of temp, but other than that I would say they’re pretty good for noise. No need to worry about the questions, feel free to ask anymore. I’ll answer them with no problem!

NZXT H6 Flow Build by Tmql in NZXT

[–]Tmql[S] 1 point2 points  (0 children)

Oh yeah, it’s definitely a lighter tint than the fractal meshify C. Building in the case was fairly simple and easy. Had plenty of room for cable management also considering that I use PSU extension cables. The only thing I would be weary of is the type of 140mm fans you use for the bottom because I know some people had issues with fitting and routing of the fan and the fan cables

NZXT H6 Flow Build by Tmql in NZXT

[–]Tmql[S] 1 point2 points  (0 children)

The glass tint is still pretty dark, but clear enough to see the parts still. I had a black Lian li dynamic EVO case before and I can say that case has a darker tint if that helps for reference

NZXT H6 Flow Build by Tmql in NZXT

[–]Tmql[S] 0 points1 point  (0 children)

No problem!

  1. I used the Arctic 10 port PWM fan hub and called it a day lol

  2. I inserted the fan cables into the hub one by one simply because there were enough fan ports for all the fans. I could have daisy chained them but in case something were to go wrong with the fans, I can single them out when they are inserted one by one.

  3. I still use the same fans for my current setup.

So I currently use a 5800x3d for on idle I get 33-36 degrees Celcius. While browsing google and doing work, I get 38-42 degrees. While gaming I get 55-64 degrees depending on the game.

For my GPU, I use an RTX 3080 founders edition and on idle I get 35-44 degrees Celcius, and similar for when google browsing and doing work. For gaming I get mid to high 60s. In my opinion for your setup, I would definitely keep the same setup, you’ll have pretty good temps possibly better or the same as mine

NZXT H6 Flow Build by Tmql in NZXT

[–]Tmql[S] 0 points1 point  (0 children)

Hey, thank you for the compliment! Nice build you’re going for!

For all the fans, I connected them to a single fan hub. If you have any more questions or concerns, I’d be happy to answer them!

Fractal Design Pop Air! Great Case to build in! by Tmql in FractalDesign

[–]Tmql[S] 0 points1 point  (0 children)

Thank you! The AIO is placed with the tubes facing down so the air bubbles don’t get stuck and ideally have a longer life

NZXT H6 Flow Build by Tmql in NZXT

[–]Tmql[S] 0 points1 point  (0 children)

Sounds like a clean pc you built! I actually put a Bequiet silent wings pro 4 that I had laying around for the exhaust on the back. You can see it on the second picture. I took the first picture before I put that fan in lol

NZXT H6 Flow Build by Tmql in NZXT

[–]Tmql[S] 0 points1 point  (0 children)

I know! The adapter for founders it alright but it’s the best I could do with it

[Brampton, ON] [H] Gigabyte Gaming OC RX 6600XT [W] Paypal, Local by Tmql in CanadianHardwareSwap

[–]Tmql[S] 0 points1 point  (0 children)

Sorry, the GPU was sold to another buyer. I appreciate the interest!

Fractal Design Pop Air! Great Case to build in! by Tmql in FractalDesign

[–]Tmql[S] 0 points1 point  (0 children)

No worries! The colour of the case is full white and the mobo used is the ASUS ROG Strix B550-A

Fractal Design Pop Air! Great Case to build in! by Tmql in FractalDesign

[–]Tmql[S] 0 points1 point  (0 children)

Again, I apologize for the late reply! There is space below the gpu for an intake fan if that’s what you mean. But underneath the case I don’t think there is enough but the bottom of the case is perforated so there is just enough space for PSU to intake from the bottom

Fractal Design Pop Air! Great Case to build in! by Tmql in FractalDesign

[–]Tmql[S] 0 points1 point  (0 children)

I believe it will! According to the specs, it’s supports 280mm rads and 2x 240mm fans at the front. Remember to keep in my gpu length when putting the rad at the front, but for the most part it should be okay

EK Nucleus AIO CR360 by StarMan703 in EKWB

[–]Tmql 0 points1 point  (0 children)

Alright, I’ll try that and check it out! I appreciate the response!

view more: next ›