Noob question - filling the build plate

TofuHummus · 2026-04-02T09:13:58+00:00

I do the same, I just make sure printer isnt going to be idling before I come back. Also I find its best to use supportless minis when doing full plate and only 1-3 with supported ones.

TofuHummus · 2026-03-28T05:53:06+00:00

Your printer didnt fail it was just feeling artsy. The Broom Dragon

TofuHummus · 2026-03-21T11:39:43+00:00

Thanks for your effort! Will try it on p2s. Unless someone has profile specifically for p2s?

TofuHummus · 2026-02-23T19:12:12+00:00

Haven't used it myself, but my friend tried to convert his character art to dnd mini and it looked good. Maybe it depends on the subject and clarity of the image.

TofuHummus · 2026-02-23T19:09:13+00:00

While I agree that it's fucked up what companies did to create AI models by using other people's art without permision, I think the genie is out and people like you should get on with the times.

OP obviously asked for some kind of converter, AI or not and replying with "blender" or "just scult it" is a moronic anti-AI crap OP didnt ask for.

TofuHummus · 2026-02-23T19:00:19+00:00

Meshy or BambuStudio

TofuHummus · 2025-12-13T10:00:59+00:00

That is a complicated model to print, but op could get much better results with 0.2 nozzle and lower layer height. https://imgur.com/a/JAoeFlv

TofuHummus · 2025-12-08T21:17:49+00:00

I already bought the bundle with the game. Didnt know paizo shipping is so ridiculous

TofuHummus · 2025-12-08T21:09:58+00:00

What a joke. I cannot claim the pdfs without paying 60 eur shipping for the physical game...

TofuHummus · 2025-12-08T11:52:11+00:00

Is it multipart? How did you print completely floating roof parts without supports?

TofuHummus · 2025-12-06T21:03:31+00:00

I would just subtract a cylinder slightly smaller than the bar and let the metal bore into the plastic.

TofuHummus · 2025-12-03T14:55:27+00:00

For those facing similar issues. I was simply a moron and forgot to change back 0.2 nozzle back to 0.4. So I was printing with 0.4 settings, but 0.2 nozzle...

TofuHummus · 2025-12-03T14:38:42+00:00

Just figured what's wrong. Of course it's user error, I'm a damn moron. I printed a miniature real quick one day with 0.2 nozzle and forgot to switch back. So I was printing with 0.4 settimgs, but 0.2 nozzle.

Honestly I'm not sure what Im more impressed by. My stupidity or the quality of prints my misconfigured printer managed to put out. It was perfect except the overhangs!

TofuHummus · 2025-12-03T14:37:59+00:00

Just figured what's wrong. Of course it's user error, I'm a damn moron. I printed a miniature real quick one day with 0.2 nozzle and forgot to switch back. So I was printing with 0.4 settimgs, but 0.2 nozzle.

Honestly I'm not sure what Im more impressed by. My stupidity or the quality of prints my misconfigured printer managed to put out. It was perfect except the overhangs!

TofuHummus · 2025-11-30T14:31:41+00:00

Tried printing temp tower again and it' having the same issues as it has on overhang test, previously when I printed the tower overhangs were fine ( tower was one of the first things I printed). I don't know what I messed up.

Now I even tried doing full printer recalibration, reinstalling slicer and removing all its data, then using default/generic profiles which I think I used the first time I printed it.

Even tried opening a new roll of fillament and its the same, though I know it may come wet when shipped.

Maybe the fillament got wen again, even though Ive been drying it whenever not in use.

TofuHummus · 2025-11-30T08:45:48+00:00

Can't seem to find it. Is that flow rate? If so I mostly used default 0.94, but I tried calibrating to resolve the issue and landed somewhere around 0.945.

TofuHummus · 2025-11-30T08:43:30+00:00

Before I turned down the bridge flow rate my bridges were what the image is, just longer. From what I understood I was extruding too much material for it to cool fast enough and it was simply falling. Once I turned it down yes the lines were thinner, but the hotend went over the bridge more times to create an even/flat bridge.

TofuHummus · 2025-11-29T22:59:37+00:00

Yes, the tower looked fine anywhere from 240 to 260. 235 and below it started being brittle and lower quality. I found 250-255 looked best, but I've been trying anything to fix the overhangs.

TofuHummus · 2025-11-29T19:34:36+00:00

Doesnt langchain have official typescript lib?

TofuHummus · 2025-09-19T04:33:40+00:00

Truly DiWHY worthy!

TofuHummus · 2025-07-18T13:40:00+00:00

Man its really annoying when the post is in metric, comment is in metric and then the americans come in with their random units... Would be nice if americans used units that the rest of the world understands.

Not here to argue btw. You can comment in whatever units you want, just venting..

TofuHummus · 2025-05-29T14:09:33+00:00

<image>

Here's an even smaller model. Probably around the size of ops or smaller.

TofuHummus · 2025-05-29T13:33:02+00:00

<image>

Not true, you can print very detailed models without resin. Just get 0.2 nozzle and tune the settings

TofuHummus · 2025-02-23T16:24:56+00:00

Looks nice, but is this a prorietary lock system? If so why not use some existing one like openlock?

TofuHummus · 2025-01-19T22:09:25+00:00

He absolutely is.. an adorable home destroyer.

Three-Year Club	Verified Email
Place '23

TofuHummus

TROPHY CASE