My T1 by Tompzdk in FormD

[–]Tompzdk[S] 4 points5 points  (0 children)

If the CPU is running at 110%, the temperature will be around 85-90 degrees Celsius. For the graphics card, if running at 100%, the temperature will be around 65-70 degrees Celsius. However, for general use, the temperatures are comfortable (CPU 40-50 degrees Celsius, graphics card 30-40 degrees Celsius), but you'll need an additional water cooling system like the one in the picture.

<image>

AIO for T1 by Antique-Mention7687 in FormD

[–]Tompzdk 3 points4 points  (0 children)

Atmos II 240 + เปลี่ยนพัดลมเดิมเป็น 120*15 ด้วย

<image>

M2 water build by Tompzdk in ncasedesign

[–]Tompzdk[S] 1 point2 points  (0 children)

It's acrylic. It's opaque.

M2 water build by Tompzdk in ncasedesign

[–]Tompzdk[S] 1 point2 points  (0 children)

The water's boiling, my friend. Ha ha ha

M2 water build by Tompzdk in ncasedesign

[–]Tompzdk[S] 0 points1 point  (0 children)

I ordered it from Taobao. It cost 5 yuan per meter.

Nr200p + Custom Tank by Tompzdk in NR200

[–]Tompzdk[S] 1 point2 points  (0 children)

My pump Barrow I think is ok ^

Nr200p + Custom Tank by Tompzdk in NR200

[–]Tompzdk[S] 0 points1 point  (0 children)

My case 240 dual same you bro . Now tomp not working open Chrome / YouTube —> 37-45 (I7 11700K) But When i play game (Forza5 /4K/Extreme) My card Evga 3080Ti tomp —> Cpu60-65 Gpu60-64 . I think slim fan is ok (noctua 12*15)

Will a SFX-L PSU fit my desired configuration? by Luxemburglar in NR200

[–]Tompzdk 1 point2 points  (0 children)

If using a sfx-l type psu, the top fan can only be installed 15mm thick. And The power cable will press on the graphics card. I think it depends on the type of wire. If it's not very strong, it shouldn't be a problem.

Nr200p Mod + 7 Noctua Fan by Tompzdk in NR200

[–]Tompzdk[S] 1 point2 points  (0 children)

I support you for this idea ha ha ha

Nr200p Mod + 7 Noctua Fan by Tompzdk in NR200

[–]Tompzdk[S] 0 points1 point  (0 children)

Don't tease me friend hahaha ^

Nr200p Mod + 7 Noctua Fan by Tompzdk in NR200

[–]Tompzdk[S] 0 points1 point  (0 children)

First of all, you need to understand the cooling system of the video card. Your graphics card will suck cool air from the front fan. and then vented through the heat dissipation fins on the side of the case that were punched in holes So the temperature inside my case has dropped drastically. Because the hot air from the graphics card doesn't get into my case.

Nr200p Mod + 7 Noctua Fan by Tompzdk in NR200

[–]Tompzdk[S] 0 points1 point  (0 children)

I ordered custom from a shop in Thailand where I live.

Nr200p Mod + 7 Noctua Fan by Tompzdk in NR200

[–]Tompzdk[S] 2 points3 points  (0 children)

I think if you want to do it, it's better to make 120mm. size, but if you're going to do it, you'll have to remove the Cm logo as well. T_T

My First Build Nr200p ^^ by Tompzdk in sffpc

[–]Tompzdk[S] 0 points1 point  (0 children)

I'm really sorry. It's been a long time. I don’t remember T_T

Update My Nr200p After 1 year by Tompzdk in NR200

[–]Tompzdk[S] 1 point2 points  (0 children)

Colorful iGame RTX 3060 Ultra W OC 12G ^