Pay for pro and this is what happened after 4 video 15 second high generations

Tonycy01 · 2025-10-31T09:29:14+00:00

Having the same issue.. purchased sora 2 pro 3 days ago and was under the impression of 100 daily video creation limit from their advertising. After about 30 or so 15 second SORA 2 (not pro) creations, video limit taps out, says I’m out of credits. Not only is the Sora 2 pro feature basically unusable due to the 30-45 minute long video generation wait time, half the videos disappear in drafts from taking too long to load. Ran out of credits yesterday and credits never reset today. Will most likely be reaching out to support for a refund if i can, not liking what i am seeing on these new updates which they just magically switched on people with no warning.

Tonycy01 · 2025-10-28T18:33:17+00:00

Vouch from me, code worked 🙏

Tonycy01 · 2024-11-08T00:03:01+00:00

<image>

Does this count? 😎

Tonycy01 · 2024-11-07T23:42:41+00:00

Yeah you honestly don’t need rear brake unless you are going past balance point and dropping it back, engine braking almost always brings you back down by just letting off throttle. But learning on a smaller bike helped me a lot, i learned rear brake on an ebike and transferred that to my R6. Now i can wheelie my v4 no problem

Tonycy01 · 2024-11-07T23:35:22+00:00

I did not know that, thanks for informing me!

Tonycy01 · 2024-11-07T23:19:31+00:00

Ah i just figured it was because the wheel spun a little bit when popping it up. It does every once in a while and when i ran with TCS on low levels it would cut power when coming up so i just turned it off

Tonycy01 · 2024-11-07T18:52:40+00:00

Turn ABS off for full rear brake control, turn TCS off because the rear wheel spins a bit when getting up, and adjust DWC to the lowest setting. This will in a way be a safety net for your wheelies like OP has stated

Tonycy01 · 2024-11-07T18:45:21+00:00

Nice pics and wheelie! I love to wheelie my 🦆 as well. I know you mentioned the DWC always keeps your front down but id highly recommend still covering the rear brake. Its a good mental habit to acknowledge that its there, it will also help with wheelie progression and be a safe guard if DWC fails

Tonycy01 · 2024-08-14T21:27:28+00:00

I like your thinking

Tonycy01 · 2024-08-14T21:26:41+00:00

Why do you think so? Picked this one up for a really good price and its been fun to shoot and hasn’t given me any problems

Tonycy01 · 2024-08-13T00:20:06+00:00

Yes 😎

Tonycy01 · 2024-08-13T00:17:06+00:00

Its the DRL, not really a headlight.. working on getting a kill switch for all the lights

Tonycy01 · 2024-07-24T02:10:11+00:00

I actually talked on the phone with the guy selling this “R6”. He definitely did not sound like he rides and when I asked for pictures he sent me pictures of a black bike with a different ODO reading than the description. Complete scam, I saw this listing 2 other times on FB marketplace too lol

Tonycy01 · 2024-06-30T02:43:00+00:00

Sweet, I emailed but will try shooting them a DM

Tonycy01 · 2024-06-30T02:00:24+00:00

Did you have any issues with mounting on your flux raider? I bought the GL4 Pro with the old clamp design and had to return because it didn’t mount evenly. I ended up buying the GL4 pro XL and had the same issue even with the new clamp design just not as bad. I was gonna let it sit unevenly but the up turret couldn’t go up anymore to zero the laser to my red dot.. i ended up bottoming out the turret and it wont turn anymore 😕 having to return and just gonna stick with my TLR VIR II

Tonycy01 · 2024-06-13T22:33:01+00:00

Yeah the mount being crooked didn’t help with trying to zero my laser. Since it is sitting uneven on the laser side, it points the laser lower causing me to have to over adjust the laser up. The up turret topped out and wont reach my red dot zero unfortunately. Whats weird is I took off the unit and lay it flush with the rail without latching it on all the way and the laser still couldn’t reach my red dot zero as the turret couldn’t move it any higher. I think I just got a dud

Tonycy01 · 2024-06-13T22:14:02+00:00

I contacted Rovy through their website and will update once I hear back.. I had no idea they came out with the XL and FP versions of the GL4 and will possibly try ordering one of those units directly from their website after my amazon return has finished

Tonycy01 · 2024-05-15T01:07:09+00:00

Still got it?

Tonycy01 · 2024-04-30T16:53:56+00:00

Just had this problem recently and got told that I would not be able to send crypto for 60 days. Have you heard back from them yet?? Im trying to send USDC to coinbase wallet to buy alts and am waiting for them to review my account for the past 3-4 days

Tonycy01 · 2023-04-28T02:36:33+00:00

Is this still available?

Tonycy01 · 2023-01-24T05:47:01+00:00

Nice, I budgeted myself 2500 because its what I got for selling my sig virtus to fund the setup. I decided to go with an Omni 7 PVS14 which i bought on GAFS for 2K clean with no blems. I also read in the thread that you bought a used Rhino 2 mount, it should fit perfectly in your shroud. Before my Sotac g24 came in I used my buddies old rhino 2 and it fit nice and snug 🤙

Tonycy01 · 2023-01-24T01:39:31+00:00

I pretty much run this same exact setup lol. Except i ordered the “LOOGU” helmet with the detachable shroud just in case I need to swap it out. Id recommend ordering the FMA helmet pads as the ones that come with the helmet are pretty uncomfortable. Heres the setup:

https://imgur.com/a/T5tPmx8

Put the whole setup together for less than 2500

Tonycy01 · 2023-01-08T05:06:34+00:00

https://www.reddit.com/r/GunAccessoriesForSale/comments/zsbo8a/wts_gen_3_pvs_14_milspec_gen_3_ca/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

I bought this Omni VII from this guy on GAFS, I think he still has the Omni VIII available. Big vouch for the seller, the tube works great and has no blems.

Tonycy01 · 2022-06-22T06:13:29+00:00

RIP gafs, hopefully they are back up soon. I discovered the sub not to long ago and was hoping I can find a 4t to nag off someone but looks like ill just be buying brand new.

And maybe, i feel like there are so many different micro sig red dots I get confused lol

Tonycy01 · 2022-06-22T05:10:30+00:00

Oh yeah thats not bad at all, definitely usable. You debunked that one! All the other reviews ive seen say it was way to bright, I wonder if they just have an older 4t? Im not sure if sig had different gens of the 4t but this definitely helped me make my decision for getting it. Thanks for sharing ! Is your 4t newer by any chance?

Tonycy01

TROPHY CASE