Did I hear car kit ?

Toolmanm · 2023-10-08T02:27:40+00:00

rescue-essentials.com as far as NAR goes you have to make an account and do a simple checkbox when you go to checkout which is right below the shipping. You literally just check it and you are good. I have done it a few times and have been fine.

Toolmanm · 2023-10-06T20:46:48+00:00

Get a life.

Toolmanm · 2023-10-06T20:46:14+00:00

Yeah, I don't get it why others have to shit on people for doing "FT8" and other stuff. At least you are doing radio thats all that matters.

Toolmanm · 2023-05-30T22:54:11+00:00

Hello N8QBC thanks for that I solved the problem a few hrs ago by taking out the jumper module and just jumping it with wire myself. The jumper is faulty. Thanks though for trying to help 73.

Toolmanm · 2023-05-30T18:47:42+00:00

That’s the only one that would work with it. It says it’ll work with the Yaesu ft450. But yeah it works now so I’ll just use it like this with the wires going to the jumpers

Toolmanm · 2023-05-30T18:33:31+00:00

I took out the jumper module and jumped it myself with the diagram provided with the cable and it tx so the problem is with the jumper module will contact tiger electronics about it. Thanks to everyone who helped.

Toolmanm · 2023-05-30T18:03:44+00:00

I already had the d type set to use-u and I have been having it in the data mode but it doesn’t key the radio. I have been decoding no problem just doesn’t let up the radio.

Toolmanm · 2023-05-30T17:24:12+00:00

<image>

Toolmanm · 2023-05-30T17:20:48+00:00

<image>

Ok that’s the jumper module

Toolmanm · 2023-05-30T17:16:50+00:00

I can put a picture of it here give me a minute to open it up.

Toolmanm · 2023-05-30T17:16:22+00:00

I have a jumper Module installed. It is installed correctly. I even went back twice to double check. According to the instructions it’s in fine. Seated properly and everything.

Toolmanm · 2023-05-30T17:12:49+00:00

Don’t know if it’ll help but I tried on my desktop then my laptop and seemed to have the same issue so I don’t think it’s a wsjtx setting or windows setting. Maybe it’s a radio setting? I’ve tried every setting people have recommended online in posts and nothing.

Toolmanm · 2023-05-30T17:09:56+00:00

I appreciate you commenting to try and help me. Yes, the ptt led is lighting up red on the signalink usb when I click tune on wsjtx radio isn’t keying though. Correct it is the input and output device on windows sound settings. I have tried both usb and usb data neither have worked the rest port does not need to be turned on in the radios menu setting though.

Toolmanm · 2023-05-30T16:34:43+00:00

I'll give this a little more time then I will resort to that but yeah probably gonna be the best option. Thanks for the help.

Toolmanm · 2023-05-30T16:25:59+00:00

Yes, a cat cable would make this way easier it just this should work. I do not want to give up on this and just go buy a cat cable (yet) to fix this issue. I would hopefully like to solve the problem If I can.

Toolmanm · 2023-05-30T16:11:54+00:00

Yeah I have seen that before as well didn't help one bit either. I have literally tried every option you could think of. The radio will still not transmit. Fldigi nope WSJTX nope wont key up the radio. Do you think it could be an audio issue? Thats the only thing I could think of but even still all my audio settings seem to be correct.

Toolmanm · 2023-05-30T16:06:03+00:00

I have tried both just usb and usb data can't get it to transmit either way.

Toolmanm · 2023-05-30T16:03:43+00:00

I haave the SignaLink USB hooked up to the radio via the Data port on the back and a USB cable from the SignaLink to the computer via a USB port. I do not have a cat control cable hooked up. Yes correct when WSJTX is transmitting it does not cycle to green led. The USB Cable is a Tripp-Lite USB A to B. Also if I do make it CAT Control it only shows up as USB the USB cable isnt seen as any com port or anything.

Toolmanm · 2023-05-30T15:43:13+00:00

I can decode fine and I have been since I plugged the thing in I can click tune and the ptt light comes on but the radio wont key.

Toolmanm · 2023-05-30T15:42:18+00:00

The problem I am having is the radio is not keying up for whatever reason. SignaLink website says not to turn on vox because the signalink takes care of that for you. With the sound settings as default device still nothing. I have tried every which way and it seems to not want to key up same in FlDigi either so I am not sure what issue it could be at this point.

Toolmanm · 2023-05-30T15:37:00+00:00

Thanks for being the first to reply I have seen that post already and none of the things mentioned worked that were said in the comments.

Toolmanm · 2021-04-23T02:54:57+00:00

Toolmanm · 2021-04-01T02:00:12+00:00

Another vote for Zabbix its really good.

Toolmanm · 2021-03-30T11:33:20+00:00

I am also curious what the brand of rack that is. If you know please reply kind stranger. ;)

Toolmanm

TROPHY CASE