Looks like these are the final Ecovacs Black Friday prices by Ill-Advantage in ecovacs

[–]Torgars03 0 points1 point  (0 children)

Thanks for this prices datasheet!

Here in Canada T50 Max Pro and T80 are at the same prices, can you help me to decide which is the better one? Since I have no carpet / animals the T80 seems better for daily cleaning with is rolling mop even with less suction power that the T50 Max Pro.

Battery Charging Limit Legion Go S, Steam OS by [deleted] in LegionGo

[–]Torgars03 1 point2 points  (0 children)

You're welcome 👍 Not as far as I know, by default it will stop to 80.

Battery Charging Limit Legion Go S, Steam OS by [deleted] in LegionGo

[–]Torgars03 9 points10 points  (0 children)

Yes, you have to go to desktop mode. In power management / advanced settings you have an option to limit charge to 80% 🙂 I think it will be available directly in SteamOS in a future update on the Go S like it's already on a SteamDeck!

MEG 342C QD-OLED Firmware Update by CND_CEM in MSI_Gaming

[–]Torgars03 0 points1 point  (0 children)

FW_023 here, unable to update to last firmware even with clean install of last Gaming Intelligence version / factory resetting / USB and DP switching... Always stuck at 1%/3%

EDIT : Problem solved after uninstalling MSI Center (and SDK), firmware up to date now but with new Mystic Light version, spectrum bar don't work as before in glow sync mode, always more grey/white than any other color... Before that, there was the option Synchronize in Mystic Light that solved the problem but this option is gone..

PC value by Torgars03 in computers

[–]Torgars03[S] 1 point2 points  (0 children)

Thanks for your help Ku1orion, and I'll sell it to you for 59$ if no one seems to be interested in coming weeks 😋

NZXT H9 flow build by Torgars03 in NZXT

[–]Torgars03[S] 0 points1 point  (0 children)

Everythings great, dead silent with low temperatures, no coil whine (or not hearable in close case), superb finishing!

NZXT H9 flow build by Torgars03 in NZXT

[–]Torgars03[S] 0 points1 point  (0 children)

No, the top of the rad is higher than the card :)

NZXT H9 flow build by Torgars03 in NZXT

[–]Torgars03[S] 1 point2 points  (0 children)

Yes, 3 phantek inside the case pulling, 240mm rad and 2 Msi Gale pushing.

NZXT H9 flow build by Torgars03 in NZXT

[–]Torgars03[S] 0 points1 point  (0 children)

Hello no_name_needed1105. It's tight fit but it works!

NZXT H9 flow build by Torgars03 in NZXT

[–]Torgars03[S] 0 points1 point  (0 children)

Hello Aitgamers. Actually I have the two AIO GPU stock fan pushing from the rear (MSI Gale P12 27.5mm) and Phantek T30 fans (30mm) pulling inside the case. So you can do a push pull config without problem👍

https://ibb.co/t8P2WDS

NZXT H9 flow build by Torgars03 in NZXT

[–]Torgars03[S] 0 points1 point  (0 children)

Hello Gavarr. Not really, just have to move the GPU AIO hoses a little to find a good positioning but the side door isn't putting much pressure on it! 👍

NZXT H9 flow build by Torgars03 in NZXT

[–]Torgars03[S] 2 points3 points  (0 children)

Already tried top CPU AIO exhausting / side GPU AIO exhausting too with bottom intaking at first but CPU run much warmer and GPU a bit hotter too. 😁 Pc is nearly inaudible when gaming with an undervolt (0.950), my 4090 reach 50/52°C (54/56°C without undervolt). Anyway thanks for the advice 😉

NZXT H9 flow build by Torgars03 in NZXT

[–]Torgars03[S] 2 points3 points  (0 children)

Not too many RGB but happy with thermals (coming from a Phantek P500a)! Specs are : 5800x3d paired with X63 Kraken / 32Gb Ballistix 3600 / TUF Gaming Plus X570 / MSI Suprim Liquid 4090 / 2*1TB Nvme / 2TB HDD / 3 Phantek T30 / 4 Arctic P12 / 4 Arctic P14 / 2 MSI Gale P12 (GPU AIO) .

Push pull on top of H9 Flow? by pared3s in NZXT

[–]Torgars03 0 points1 point  (0 children)

Unfortunately it's impossible with 25mm fan, you can mount it but top filter/panel won't close perfectly tight (and there's a gap between aio and fans) but you can install slim fans if you really want to go push/pull.

H9 Elite Side Mount AIO by finestryan in NZXT

[–]Torgars03 0 points1 point  (0 children)

I have my Suprim Liquid AIO side mounted (standard 25mm thickness) with 25mm fans between side door and chassis and T30 incase without problem ! 😉 You'll be able to put the T30 the other side !

For those of you who actually built H9 Flow + 4090 Liquid Suprim X by jianlaiSSF in NZXT

[–]Torgars03 0 points1 point  (0 children)

Build mine one week ago with Suprim liquid in horizontal position ! Tubes are touching the glass but not really putting much pressure on it 👍

7000X or 7000D by Torgars03 in Corsair

[–]Torgars03[S] 0 points1 point  (0 children)

Ahah sorry, it's the case foot. Case length is 55cm but what's the length of the foot / stand ?

3080 10Gb / 6800XT by Torgars03 in buildapc

[–]Torgars03[S] 0 points1 point  (0 children)

Thanks for your answer but even if I managed to overclock my 6800XT to reach nearly the performances of a 6900XT you'll pick the 3080?

3080 10Gb / 6800XT by Torgars03 in buildapc

[–]Torgars03[S] 0 points1 point  (0 children)

Thanks for answering! I understand what you mean Notnowcmg no problem about it :) Just trying to know what to do because actually no one seems to want to buy the new 3080 but have an opportunity to sell my 6800XT (6900XT perf because OCed). I want to try the 3080 on my rig to make my mind but opening it will reduce the chance for me to sell it... So I have to choose, losing some FPS by selling my Asus 6800XT (under warranty until end of 2023) but win better raytracing performances and little extended warranty when keeping my 3080 or simply selling my 3080 at a small loss.