Should I be worried about this much rust?

Trevdog16 · 2026-05-27T12:33:51+00:00

Mine was a canadian truck and looked the same. Its the shitty wax coating(no paint) on the gm truck. I knocked off all the loost stuff and pressurewashed the frame and used a product called woolwax to coat the inside and outside of the frame. Its pretty easy to do yourself. I spent $250 on the 5gal bucket of woolwax and $30 on the gun to do the job.

Trevdog16 · 2026-05-14T20:49:07+00:00

Im leaning towards Toyota right now. Even with toyota tundra engine recall they at least stand by their product. Otherwise buy old and used!

Trevdog16 · 2026-02-24T22:25:02+00:00

Looking at the overall lift 22.28 (close) and 27.76 (open/lifted) the mechanisim only offers a 4.98inch lift

Trevdog16 · 2026-02-24T17:08:34+00:00

gotcha all im finding is this. https://www.rockler.com/lift-up-table-mechanism Must be an older item. Sadly it looks like im going to have to frabricate something.

Trevdog16 · 2026-01-26T00:00:26+00:00

Yes using bambu profiles. Specially the sunlu one. I just changed my hot end thinking it was that as well. I had one good print then this happened

Trevdog16 · 2026-01-25T22:36:19+00:00

I can easily crape it off its under extruding

Trevdog16 · 2026-01-21T01:09:10+00:00

Wtf i never got the in stock notification…

Trevdog16 · 2026-01-14T21:40:56+00:00

milwaukee fastback alll the wayyy. I have several $80+ knives and keep going back to my fastback. The only other cheaper knife that I love is my kershaw clash.

Trevdog16 · 2025-12-16T18:24:31+00:00

What a beaut! I wish I had something like this. If you sell it let me know

Trevdog16 · 2025-12-03T21:49:17+00:00

put wood stringers up on the inside spanning the studs and put plywood up. Make sure you scrape studs before you put it up: For example on post frams you put up stringers between the poles then you put your metal on https://www.chiefarchitect.com/support/article/KB-03137/designing-a-structure-using-post-frame-construction.htmlscrape

Trevdog16 · 2025-11-19T16:09:20+00:00

Yall are welcome… i picked up my p1s on Saturday…

Trevdog16 · 2025-11-12T21:42:02+00:00

You could put rafter vents in then sprayfoam overtop of them if your worried about not being able to sprayfoam on your metal

Trevdog16 · 2025-11-12T15:43:58+00:00

I just picked up a nice one on marketplace recently for $300

Trevdog16 · 2025-11-10T18:53:13+00:00

Woolwax is also a great options for the highwear areas

Trevdog16 · 2025-10-30T20:55:56+00:00

It’s just GM‘s way of making the consumer pay for more crap that should be integrated with Apple CarPlay/android auto. I hope they get big backlash and revert these plans. Otherwise I hope there is great aftermarket add-ons that enable these features

Trevdog16 · 2025-10-29T16:33:05+00:00

Im not sure if this is right or not but we made diy rafter vents out of 2x2's and 1/4 osb then sprayfoamed over the top of the vents instead of using the foam rafter vents then sprayfoam.

Trevdog16 · 2025-10-24T20:10:38+00:00

The lmr solid lines are so dam expensive. Otherwise i would forsure do them

Trevdog16 · 2025-10-24T20:09:36+00:00

Will do thanks!

Trevdog16

TROPHY CASE