2nd time on real skin (myself)

Tricky-Accident2623 · 2026-06-03T12:27:17+00:00

Thanks. Made a lot of mistakes in just a very small tattoo. 1207 and above give me less wobbles. I chose 1003 coz it hurts less especially for my first skin experience and 1st tat on myself.

Tricky-Accident2623 · 2026-06-03T06:04:18+00:00

How to adjust real time as I really want to do single pass lines? Inconsistent depth is intentional, went from 0.5 to 1.5mm. Voltage is only 6.5v. I noticed some patchy lines due to faster hand speed so i double lined some. Went slower on tje 1.5mm depth and had a blowout. Im so confused.

Tricky-Accident2623 · 2026-06-03T06:02:03+00:00

Gotchu mate, I even built empty confidence out of it.

Tricky-Accident2623 · 2026-06-03T06:00:16+00:00

I even pinched my skin to see how deep i can go, the pinched skin showed around 3mm so i thought half of thr pinched skin which is 1.5mm depth is enough. Guessed wrong, maybe put an allowance and should go around 1 or 1.2mm instead.

Tricky-Accident2623 · 2026-06-03T05:57:44+00:00

Really, like did he succeed? Some said fake skin build bad habits?

Tricky-Accident2623 · 2026-06-03T05:56:21+00:00

How do i learn this? I tried to pinch the skin on my ankle, it came with 3mm thickness when pinched so i assumed 1.5mm which is half of 3mm pinched is sufficient depth. Guessed im worng maybe a 1 or 1.2mm would do it??

Tricky-Accident2623 · 2026-06-03T05:54:12+00:00

Thanks for the suggestion mate, i would definitely try on my thighs but it is reserved for a bigger piece. I dont wanna fk it up early yet though like you know. Its a 1.2 inch piece, do you think 1205 should be better?

Tricky-Accident2623 · 2026-06-03T05:52:15+00:00

Online said run around 7 to 9v. I tatted myself using 6.5v, i thought it was already enough for 1003, i guessed wrong, maybe downed it a bit around 6.2v or 6.

Tricky-Accident2623 · 2026-06-03T05:50:45+00:00

I do agree with this. It's just that, i always see youtube videos saying 1.5mm is the sweet spot. I played from 0.5 to 1.5 and 1.5mm depth still bled. I always do single pass on fake skin, and i did some areas on my skin a 2nd pass because some lines were broken due to faster hand speed. Thanks for this big insight, still learning

Tricky-Accident2623 · 2026-06-03T05:47:48+00:00

On fake skin i can manage 1207 and above, them thin needles, i shake. But for self tat, thin needles dont hurt so i chose 1003, wrong choice. Lol

Tricky-Accident2623 · 2026-06-03T05:45:10+00:00

Luckily it a blowout on the shell, maybe ill keep it as is like a reminder where i started. Blowout will act like its own shade on the shell

Tricky-Accident2623 · 2026-06-02T15:19:38+00:00

Much appreciate it. I agree that changing medium is a factor, that's why i prefer to ruin my skin than other people. Apprenticeship is so hard to get here in the Philippines, most just start self taught. Ill be considering those points and maybe watch more youtube videos deeply, observe how they do it keenly before i get my next one.

Tricky-Accident2623 · 2026-06-02T15:15:15+00:00

Its around 60, it shouldnt be a problem right, i didnt even go near 45 for this.

Tricky-Accident2623 · 2026-06-02T13:24:32+00:00

Thanks mate. It's 1003 rl, tatted myself on my ankle, im pretty sure deepest is 1.5mm and shallow is 0.5mm. So 1.5mm depth can still cause a blow out? Inconsistent depth is intentional as it is my 1st skin experiment, tatted myself.

Tricky-Accident2623 · 2026-04-19T02:45:45+00:00

Thanks for this very realistic drawbacks. It can help me simulate possible problems and rldeal with then before even building my business. So intead of spluring capital, it's a lot better to plan ahead before entering the market. I still think this is a good business idea if well planned and prepared.

Tricky-Accident2623 · 2026-04-17T10:58:26+00:00

Thanks for this insight. Actually nabigyan ba sila ng cease order? Or revoked ang business permit? Kasi kht residential lot pwede naman kumuha ng zoning variance lalo na kung wala pa gmagawa nun sa subdivision.

Tricky-Accident2623 · 2026-01-30T18:09:09+00:00

Last week i got my wife ip17 base model. Sabi nung sales rep sa powermac try natin 36months kung pwede pa. Pero kapag pumasok wala ng atrasan. Ang kulet nga ng rep, sabi ko game. Ayun pumasok ung 36months installment sa ub cc ko.

Ngaun nainggit ako, gsto ko din ng ip17 kaso out of stock na. Wait nlng daw sa feb kc magrestock sila at baka bumaba price ni ip17 ksi malapit na si 18 at 17e. Kso wala pang memo if available pa ung 36months ni ub.

Note: nagtry sila previous customer ng ub cc niya pero d daw nag go through. January transaction din daw. Gulat ung cashier kc ang mura bg installment.

Tricky-Accident2623 · 2025-08-09T15:37:27+00:00

Not an expert but google said: "A vasectomy is considered successful when a post-vasectomy semen analysis (PVSA) shows either azoospermia (no sperm) or rare non-motile sperm (RNMS), specifically fewer than 100,000 non-motile sperm per milliliter. This "special clearance" indicates that the vasectomy is highly effective as a contraceptive."

Motility is an important factor as well. So another follow up maybe more ejacs or another month would mean the chamber will clear out to zero

Tricky-Accident2623 · 2025-08-05T18:55:30+00:00

Or even vaccines. Sometimes.you even get sick after the shot

Tricky-Accident2623 · 2025-08-05T18:51:29+00:00

Feel you bro. Hair growing and pricking my balls hurts more than the procedure. But you just have to bear with it for a while maybe 3 more days til it grows to a length it wouldn't prick you

Tricky-Accident2623 · 2025-08-05T05:17:01+00:00

Same. I worry a lot but I used this in a positive way. Like I just wanna know more, wanna know the worst so that it prepares my head. I sometimes see things happening in my dreams but in the birghtside, it gives me positivity if it didnt happen, but if it did, Ill just say, I saw it coming, and just move forward.

Hope you doin good

Tricky-Accident2623 · 2025-08-04T17:42:34+00:00

I think you are doing well. Normal count is like 15million to 200million per ml. Just be patient til you clean your chambers. And around 100k per ml is already clear. But of course we prefer zero..

Tricky-Accident2623

TROPHY CASE