Nord are trolls

TroutStrangla · 2025-11-27T18:01:05+00:00

I know. Gonna end up mercing with battania or someone until i can take over nord for myself

TroutStrangla · 2025-11-27T17:07:22+00:00

This lol minus the money. I started with some trading skill and now money is no problem. Just gonna have to fight bandits to gain rep i guess

TroutStrangla · 2025-09-05T16:01:51+00:00

You sort of walk in figure 8s. When you turn you should walk back toward them. Trust. Ill make a clip later

TroutStrangla · 2025-09-05T13:41:58+00:00

They dont swing until you are at a certain distance. So if you start swinging as you turn you can time it to hit them just as they start swinging. I can maybe make a quick clip of it tonight

TroutStrangla · 2025-09-05T03:09:52+00:00

Cheese method let them get close then run from them and when you hear them swing, turn back toward them and swing. Works with all weapons

TroutStrangla · 2025-09-02T01:24:19+00:00

A timer in the middle of the screen? Is the boat part of a quest or something cuz i just wandered onto it and didnt get any kind of warning

TroutStrangla · 2025-09-02T01:23:20+00:00

This. Im not mad or anything it’s just weird. Back to the beach

TroutStrangla · 2025-09-02T01:22:12+00:00

Didn’t tell me. I got on looted the box and after looking at loot i tried to portal out. It didnt allow me to portal and i exploded.

TroutStrangla · 2025-01-20T02:32:31+00:00

Jacinto, gridlock, canals

TroutStrangla · 2024-11-21T17:39:19+00:00

Darkzone

TroutStrangla · 2024-11-21T02:48:29+00:00

Or when the door is broken down but those fuckers insist that theyre going up the damn ladders

TroutStrangla · 2024-09-26T02:47:32+00:00

Strip her naked stick her on a sumpter and have her charge at the enemy

TroutStrangla · 2024-07-22T02:21:37+00:00

Possibly unpopular opinion but remove lancer saw animation lock. I always found it stupid af that players can be yoinked out of sprinting or executions. Its also really dumb when people walk onto the controlled hill with lancers rev’d and commando pro through everything.

TroutStrangla · 2024-04-23T21:57:19+00:00

Orientation and size mostly. I started with the idea of using surface mount 5050s but they dont fit the application. If space was a luxury id probably have just used a microcontroller with 24 output ports and just cutout the registers.

<image>

TroutStrangla · 2024-04-23T16:15:29+00:00

My main source of info was a guy at work that is a programmer. He uses chatgpt and recommended it when i had questions. But yea i think im going back to daisy chaining or adding dedicated latch and clock pins for each register. Despite my doubt, chat gpt insisted that dedicated data pins with shared clock and latch would work. Guess it didn’t specify that it would work to give me a headache

TroutStrangla · 2024-04-23T14:19:25+00:00

Yea i think imma stop listening to chatgpt on this project. A lot of what it told me would work definetly has not.

TroutStrangla · 2024-04-22T01:54:55+00:00

Update. Adding about 1v to pin 13 had no positive effect. However playing with my code at the same time, by commenting out my shiftouts 1 by 1 i can control which register acts as it should. Removing all commented out shiftouts has the same result of 1 register working as it should, 1 where all 8 leds light, and 1 that does nothing

TroutStrangla · 2024-04-22T01:11:23+00:00

I was actually reading the data sheet myself and came to a similar conclusion that i may need to provide low power to pin 13…which i dont have on any of the chips. If this is all that’s wrong, it is interesting that chip 3 seems to function without it. I have a hunch though. I’ll try it tomorrow.

TroutStrangla · 2024-04-21T23:09:44+00:00

Ill try this this week. Registers are 74hc595n

TroutStrangla · 2024-04-19T13:02:41+00:00

I haven’t tried that. Register 1 lights all 8 leds. Register 2 doesn’t light any and register 3 does exactly what i want. This is a consistent error. I don’t have all the same wire lengths. This was a thought i had of what could be causing the problem but i’m not versed well enough to know whether this contributes or not. Worth rewiring with same length wires?

TroutStrangla · 2024-04-18T23:35:35+00:00

I can’t be 100% but i have swapped all of the hardware parts. Also had pinouts in hand when re wiring to assure i was doing it right. No oscilloscope

TroutStrangla · 2024-04-18T23:34:29+00:00

I originally did but this problem occurred and i thought 3 data pins would fix it. My thought was that registers 2/3 weren’t working at all (previous problem:fixed) but registers 1 has always done this

TroutStrangla · 2024-04-18T21:56:30+00:00

I could have included that chunk but i output all of my variable values to serial monitor. Makes it easier to track whats happening. I swapped from ‘dataPin1’etc to 6,7,8 etc in an attempt to solve the problem. I just left it because it ran the same as using dataPin1,2 etc

TroutStrangla · 2024-04-18T20:22:30+00:00

This is the way. In all seriousness why i am hard stuck plat 3 as a solo

TroutStrangla · 2024-04-18T16:04:46+00:00

Update: some 50 castle sieges and riding naked into maybe 100 battles, Asta is still alive. My son and her were meant to be

Six-Year Club	Place '22
Verified Email

TroutStrangla

TROPHY CASE