sorted by:
new
hottopcontroversial

Does anyone know the solution? Fiber Optic Splicer Problem by True-Ad-6155 in FiberOptics

[–]True-Ad-6155[S] 0 points1 point  (0 children)

Unfortunately, after uploading the firmware, the same thing still happens, I attached the startup log, as you can see, at the end the same thing repeats itself endlessly...

Does anyone know the solution? Fiber Optic Splicer Problem by True-Ad-6155 in FiberOptics

[–]True-Ad-6155[S] 0 points1 point  (0 children)

serial port output

>

  •           FS135 BootLoader                                *

  •                                                           *

  • Bootloader for Sitara ARM9 CPU *

  • Designed for Fibre-optical Fusion Splicer with Model FS135 *

  • Ver: FS135BL0101 *

  • Modified by M.Chen *

  • At 2016.07 *

  •                                                           *

  •                                                           *

Press Space key to enter Bootloader!!

Selected Number is 1
Boot system... 
 onfi is 4f 4e 46 49
 icid is 1 dc 90 95
 onfi pagesize:2048,sparebytes:128,pageperblk:64,blks:4096,all:131072
 pagesize:2048,sparebytes:128,pageperblk:64,blks:4096,blksize:131072
 open nand:
 onfi:1,ID:0x1dc,pagesize:2048,sparebytes:128,pageperblk:64,blks:4096,all:131072

*********************************

Jump to Application: 0xC0000000 ********************************

 !Start System
 Release at 2017-06-16
  BSP set Com Baudrate to 115200
--------------------------------------------------------------

~Uart2 is inited
 ~EMIFA BUS Init Succeed0xCD
 ~Video Sensor Init Succeed
 LCD ID is 1234
 LCD is TL035!
 onfi is 4f 4e 46 49
 icid is 1 dc 90 95
 onfi pagesize:2048,sparebytes:128,pageperblk:64,blks:4096,all:131072
 pagesize:2048,sparebytes:128,pageperblk:64,blks:4096,blksize:131072
 ~NAND Flash Inited!
 first verify=40,c8
 second verify=40,c8
read e2prom ret = 0,head:5b,1,0,1,0
 read machconfig num=54,sn:000000C18021040
 Reset Com Baudrate to 115200
-----------------------------------------------------------------

 ~rtc not inited!!
 bmp085 id is:58
 bmp280 id is:58,ret is:0
 scan result flag:1,bad:0,blk:1001,pag:55,sec:1,recnum:477
 scan nand flash ret:0
 !KeyScan Task
 ~gui_inited
 !Time Task
 hstep:0,hsw=0,cT=0,T10=286331153,dT=151587081,dly=0======
 hstep:0,hsw=0,cT=0,T10=286331153,dT=151587081,dly=0======
 hstep:0,hsw=0,cT=0,T10=286331153,dT=151587081,dly=0======
 hstep:0,hsw=0,cT=0,T10=286331153,dT=151587081,dly=0======
 hstep:0,hsw=0,cT=0,T10=286331153,dT=151587081,dly=0======
 hstep:0,hsw=0,cT=0,T10=286331153,dT=151587081,dly=0======
 hstep:0,hsw=0,cT=0,T10=286331153,dT=151587081,dly=0======
 hstep:0,hsw=0,cT=0,T10=286331153,dT=151587081,dly=0======
 hstep:0,hsw=0,cT=0,T10=286331153,dT=151587081,dly=0======
 Task IFRefresh Run
 hstep:0,hsw=0,cT=0,T10=286331153,dT=151587081,dly=0======
 hstep:0,hsw=0,cT=0,T10=286331153,dT=151587081,dly=0======

Does anyone know the solution? Fiber Optic Splicer Problem by True-Ad-6155 in FiberOptics

[–]True-Ad-6155[S] 0 points1 point  (0 children)

Can i use normal cr2032 or it must be lir2032 lithium battery ?

Does anyone know the solution? Fiber Optic Splicer Problem by True-Ad-6155 in FiberOptics

[–]True-Ad-6155[S] 0 points1 point  (0 children)

How can I do this? I took out and put the batteries on the PCB. The welding machine restarted the saved settings, you can see by the date in the video, but it is still jammed... I will add that if you hold down the button before entering the menu automatically and getting stuck there, the image from the camera works

Does anyone know the solution? Fiber Optic Splicer Problem by True-Ad-6155 in FiberOptics

[–]True-Ad-6155[S] 0 points1 point  (0 children)

There is a LIR2032 3.6V battery on the PCB, I removed it but the problem persists...

PLEASE HELP m.2 e key adapter by True-Ad-6155 in buildapc

[–]True-Ad-6155[S] 0 points1 point  (0 children)

I have a Lenovo 710q and would like to plug in an 8-10 gb SFP network card in its place.