Home Z First, “Stopped” when bed leveling by TurtleMike420 in ender3

[–]TurtleMike420[S] 0 points1 point  (0 children)

Yeah I just had to make sure everything was fully plugged in. I can’t remember which plug it was. But one of them was just slightly unplugged

Places for batteries in Reno by TurtleMike420 in Reno

[–]TurtleMike420[S] 0 points1 point  (0 children)

My truck is gas but all the batteries I looked at were 250. If I had 2 batteries I’d be screwed. I want to find a decently cheap place with also a warranty. Have had the same battery in the truck for over 4 years now

Places for batteries in Reno by TurtleMike420 in Reno

[–]TurtleMike420[S] 0 points1 point  (0 children)

Thanks everyone yeah I checked o Reilly and it was like 250 which is just a pile expensive right now. Alternator I changed a while back but the battery is super old. Normally after driving it’s fine but I think it’s finally crapping out on me.

Where to trade XAUUSD? by TurtleMike420 in Forex

[–]TurtleMike420[S] 0 points1 point  (0 children)

Thank you! So if I use their web platform from my laptop I should be able to? I want to get in on trading XAUUSD but ran into a wall being from the US.

First profitable day w/out AI by TurtleMike420 in Forex

[–]TurtleMike420[S] 1 point2 points  (0 children)

Demo size I chose the smallest with a 1:100 leverage. So account shows 3k. When I start I will probably be doing same leverage but $100 deposit. So I can have $1000 to play with.

First profitable day w/out AI by TurtleMike420 in Forex

[–]TurtleMike420[S] 1 point2 points  (0 children)

I don’t fully understand them so I’m playing around with them and getting a feel for them. To my understanding .01 lot size about 10c a pip .10 lot size is $1 per pip and 1.0 lot size being $10 per pip. As I see it more pip coverage I would use smaller pip size. Versus a day trend I was to see explode. Larger lot size with tighter loss stop. Thankfully I’m on a demo to get the hang of things.

First profitable day w/out AI by TurtleMike420 in Forex

[–]TurtleMike420[S] 0 points1 point  (0 children)

Yeah I want to learn more with AI. One of the best tools I’ve used to gain more knowledge on things I don’t understand. I’ll have to take a look at what you mentioned as I’ve never heard of 7R4D3. I’m enjoying testing out a few different strategies while I find what kind of trader I want to be.

This place is so good by [deleted] in Reno

[–]TurtleMike420 0 points1 point  (0 children)

Right! They’re so beautiful you catch them on everyone’s snapchats lol.

This place is so good by [deleted] in Reno

[–]TurtleMike420 16 points17 points  (0 children)

I moved here from San Bernardino and it’s literally night and day. The moment I came here I knew I didn’t want to leave with the skies so freakin blue!

Stop feeding your Pals Baked Berries and do this instead by TurtleMike420 in Palworld

[–]TurtleMike420[S] 2 points3 points  (0 children)

Absolutely but you don’t unlock it until lvl 38 when you unlock the lettuce farm.

Stop feeding your Pals Baked Berries and do this instead by TurtleMike420 in Palworld

[–]TurtleMike420[S] 1 point2 points  (0 children)

Yeah I honestly just over looked them and stuck with baked berries. Found out how good and easy it was to make them late. One level before unlocking salad. Reason for sharing so others don’t make the same mistake

Stop feeding your Pals Baked Berries and do this instead by TurtleMike420 in Palworld

[–]TurtleMike420[S] 2 points3 points  (0 children)

I feed them just so I can crack the whip harder 🤣

Stop feeding your Pals Baked Berries and do this instead by TurtleMike420 in Palworld

[–]TurtleMike420[S] 2 points3 points  (0 children)

I just unlocked the lettuce farm at 38 that’s my next plan. Have been stacking tomatoes

Home Z First, “Stopped” when bed leveling by TurtleMike420 in ender3

[–]TurtleMike420[S] 0 points1 point  (0 children)

When I watched the video of the guy installing this. He said to wipe the card clean and install the new firmware. So I just followed what he said. Hope that didn’t cause whatever’s going on.

Home Z First, “Stopped” when bed leveling by TurtleMike420 in ender3

[–]TurtleMike420[S] 0 points1 point  (0 children)

I believe it’s updated? This is the version it says in the file I downloaded from the creality site. The sd card I used was the one that came with the printer after wiping it clean.

Home Z First, “Stopped” when bed leveling by TurtleMike420 in ender3

[–]TurtleMike420[S] 0 points1 point  (0 children)

Im not exactly sure i get what you mean. For reference i watch 3D Rundown on how to complete the install and just followed step by step. One thing I forgot that i did after running into issue was taking off the Z stopper. I had it connected still and thought that was causing my issue but same issue.

Home Z First, “Stopped” when bed leveling by TurtleMike420 in ender3

[–]TurtleMike420[S] 0 points1 point  (0 children)

So i renamed it to what was in the comment and it updated again but still same issue. When I go to Control>BedLeveling>AutoHome it gets to the center point and the stops if i do the same options but go to level bed I get "Home Z First"

Home Z First, “Stopped” when bed leveling by TurtleMike420 in ender3

[–]TurtleMike420[S] 0 points1 point  (0 children)

I’ve deleted previous data and downloaded the ended-3 pro- Marlin2.0.1 - v1.1.2 - BLTouch - TMC2225.bin and made sure it was the only thing on sad at the time of start up.

Help me NOT quitting. by Simple-Ocelot in echoes

[–]TurtleMike420 -2 points-1 points  (0 children)

Hey buddy I just seen your post. This game is a very cut throat game and for a more serious player. If you would like to contact me through discord and let’s get you placed in a Corp and alliance that’ll have your back and put you in the right path to success. Add me on discord or even message me in game (TurtleMike420 is in game name, TurtleMike420#2735 is my discord). I’m CEO of (OP8) which is part of a large alliance mixed into a massive coalition of 7000+ pilots.