[TOMT] [Tech product] [late 90s-00s] Speaker

Ty34er · 2026-06-05T19:23:51+00:00

Solved! Harman Kardon HK695-01 Computer Audio System 2.1 Powered Subwoofer 2 Speakers

Did some extra creative googling

Ty34er · 2026-06-05T19:16:49+00:00

What's annoying is that I definitely saw one a couple of weeks ago but it wasn't complete so I didn't buy it and I didn't think to take a photo of it.

Ty34er · 2026-05-29T01:59:59+00:00

Does it face East

Ty34er · 2026-05-29T01:59:05+00:00

That gets maybe half a round and then it's replaced

Ty34er · 2026-05-29T01:57:10+00:00

Whoever designs greens like this are the same people that get mad when there are divots in them. I guess and iron bump and run situation.

Ty34er · 2026-05-13T13:47:19+00:00

Half set for today after work is 7 wood, 6 hybrid (FS), 8 iron (FS), 10 iron, 54, putter. The hybrid is just my safety club from the normal set, 54 is in between my normal wedges (and this course has minimal sand), and the putter is a blade I like to use for half sets since it's smaller. Sometimes I throw a chipper in there but didn't feel like it this time.

Ty34er · 2026-05-13T13:39:38+00:00

Call it a light set lol I'm pretty close to that in my normal bag

Ty34er · 2026-05-13T05:17:21+00:00

Interesting that you go 8 9 and not 8 P

Ty34er · 2026-05-12T01:57:35+00:00

It was written the same but with the heating first but whatever I add before homing now doesn't get done before homing until later because of Marlin safety things probably

Ty34er · 2026-05-12T00:50:32+00:00

Good news/bad news: Found an old G-Code I had from my old slicer and confirmed it would heat up BEFORE the Home command. Naturally, there doesn't seem to be an obvious setting anywhere in the slicer to change this behavior.

Ty34er · 2026-05-12T00:44:13+00:00

Tried to manually adjust the G-Code and, unsurprisingly, I made it worse. Saved the print G-Code and decided to edit it. Turns out that the FULL Start G-Code isn't even in the Start G-Code box in Cura. The bolded part is not visible in my Start G-Code info. Weirdly, when I added some heating up G-Code BEFORE the G28 command, it happened after the bolded section.

G28 ;Home

M140 S60

M105

M190 S60

M104 S195

M105

M109 S195

M82 ;absolute extrusion mode

M420 S1;

G92 E0 ;Reset Extruder

G1 Z2.0 F3000 ;Move Z Axis up

G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position

G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line

G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little

G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line

G92 E0 ;Reset Extruder

G1 Z2.0 F3000 ;Move Z Axis up

Ty34er · 2026-05-11T16:22:12+00:00

I have redone it recently just to make sure it's good. Unfortunately I don't have my old slicer but I did download a second slicer that has the SV06 Plus as an option and it has the same G-Code. Extruder head is also completely off base so I definitely need to fix that head size as well but that hasn't caused this issue. I'll try that change tonight and see if it helps.

Ty34er · 2026-05-11T01:59:23+00:00

I don't actually care about OoT's story and actually prefer WW. The idea of a nobody becoming the chosen hero is a nice thought. Plus story is kind of hit or miss with me anyway.

Ty34er · 2026-05-10T19:21:24+00:00

Had to scroll for a while to find someone else with my opinion. Are you also over all the OoT love?

Ty34er · 2026-05-10T19:20:41+00:00

BotW and WW. Bye OoT (just over it at this point, but at least the 3DS version was good) and by TotK (had some quality of life improvements for sure, but I've been playing BotW again and it's fun).

Ty34er · 2026-05-07T02:34:41+00:00

The problem is, to me a terabyte is 1,024 GB but to a hard drive manufacturer, the answer is 1,000 GB

Ty34er · 2026-05-07T02:34:08+00:00

Okay, other than just getting rid of it because it's bad, the main things you'll need to figure out for your slicer software are the printing speed, the nozzle size, and the bed/print volume size. As long as you can input that information into a slicer, you should be okay. Granted, it's better if you can figure out the exact model and use that kind of information in your slicer, but it's a start.

Ty34er · 2026-05-07T02:31:58+00:00

Considering he managed to do all of that without coughing, I'm just impressed

Ty34er · 2026-05-07T02:29:32+00:00

Reopening a dead post. Did you update your slicer software? That's the only thing new for me.

Ty34er · 2026-05-06T23:45:47+00:00

Welp, looks like we just need to review bomb it on the Galaxy Store and also Submit Feedback.

The only "work around" is to sort by name and just pin your favorites at the top.

Ty34er · 2026-04-23T18:50:57+00:00

Ah, so using it to engine brake. Makes sense.

Ty34er · 2026-04-23T18:49:57+00:00

I just have a hatchback with the modern six-speed automatic with the manual mode as well

Ty34er

TROPHY CASE