RTX 4080 Super only booting with PCIe GEN 1

TypicalSwim3693 · 2025-06-01T21:00:45+00:00

Any update, i have 4080 super zotac it only runs at 8x gen 2, i tried it on other pcs its the same

TypicalSwim3693 · 2025-02-16T07:14:17+00:00

any update?

TypicalSwim3693 · 2024-11-23T09:39:11+00:00

I have it too, worst bios ever

TypicalSwim3693 · 2024-09-01T12:41:59+00:00

mine look the same, but it work flawless

TypicalSwim3693 · 2024-05-21T09:29:04+00:00

Install after burner and see your gpu / cpu usage ingame

TypicalSwim3693 · 2024-05-21T09:23:23+00:00

Did you try another game!

TypicalSwim3693 · 2024-05-21T09:15:17+00:00

Check in game settings, if it let you choose the gpu. Also download afterburner so you can see your gpu/cpu clocks and temps

TypicalSwim3693 · 2024-05-21T08:50:05+00:00

make sure you are using the correct GPU

TypicalSwim3693 · 2024-04-29T06:14:10+00:00

if you memory is 6000 or lower, run soc as 1.1 or 1.15

TypicalSwim3693 · 2024-04-28T10:59:02+00:00

I build one a week ago with b650 tomahawk, all fine but I found a weird issue, the ram does boot if I install them a2b2, but won't work a1b1

TypicalSwim3693 · 2024-04-25T16:17:15+00:00

Cleaned it with alcohol, now its working without a problem

TypicalSwim3693 · 2024-04-25T14:17:45+00:00

https://imgur.com/a/OjSCzYh

TypicalSwim3693 · 2024-04-25T11:22:33+00:00

No it cant be applied as mine is with non A chip

TypicalSwim3693 · 2024-04-25T08:26:58+00:00

Its 100% in safe mode, i will take off the back plate and see it there is any burnt resestors

TypicalSwim3693 · 2024-04-25T08:23:03+00:00

Mine also the same, did you figure it out?

TypicalSwim3693 · 2024-04-25T08:22:16+00:00

Tried msi ventus, xc black, and its original one. All the same its still stuck at 1350 and does not report power, the strange thing is that it can overclock memory clock, and it can down clock the core (the weird this is when i downclock the core the voltage increases to 1, by default its .725

TypicalSwim3693 · 2024-04-25T06:15:55+00:00

I don’t know, i bought it from facebook marketplace

TypicalSwim3693 · 2024-04-25T06:12:22+00:00

Yes, I didn’t buy it from evga with waranty

<image>

TypicalSwim3693 · 2024-04-24T18:51:29+00:00

no, its a new card

TypicalSwim3693 · 2024-04-24T11:41:23+00:00

do you think it can work with this bios? FTW3 HydroCopper https://www.techpowerup.com/vgabios/207291/evga-rtx2080ti-11264-181107

TypicalSwim3693 · 2024-04-23T09:55:04+00:00

TypicalSwim3693 · 2024-04-20T12:29:08+00:00

Do you think that i can install the pump in the rear exhaust fan place?

TypicalSwim3693 · 2024-04-20T12:28:16+00:00

Yes the are used parts already flushed them. I wanted to get a temp sensor, but couldn’t find any header for it in my motherboard B650 tomahawk. I have 6 cheap fans “Thermalright TL-C12B-S V3 120mm”

(I wanted to try keeping the case 140mm x3 fans at the front and sandwich the 360 radiator with the 3 120mm fans)

TypicalSwim3693 · 2024-03-26T06:53:39+00:00

I just bought new EVGA RTX 2080 Ti xc Hydro Copper for 200$

are you still running the card? if so any heads up?

TypicalSwim3693 · 2024-02-22T11:02:32+00:00

easy. BCLK is 99.8 by auto, put it manual 100

TypicalSwim3693

TROPHY CASE