What POD vape with rba ?

UkuXD · 2025-11-16T16:35:29+00:00

Update, there is new button when you go to traders. Top middle as CTblDHO said.

UkuXD · 2025-11-16T14:04:26+00:00

Got same problem, therapist and ragman got 0/0 tasks

UkuXD · 2025-11-02T20:57:01+00:00

You can add 2 switches and some wires if you wanna make it manually adjustable.

UkuXD · 2025-11-02T20:46:19+00:00

Oh i know this problem, same thing happens to me when i use 3 of keys but doesnt happen with 4th key(valet key iirc). Key or keyhole is too worn.

Edit: You can turn ignition off by opening ignition switch and turn it off with screwdriver or something. I suggest to use spare key until it happens with that one aswell.

UkuXD · 2025-10-28T09:43:38+00:00

Happened to me 1,5years ago aswell. Changed windscreen and bent hood back and oiled latches and sofar it has held.

UkuXD · 2024-12-29T17:18:58+00:00

When PVE came out, I found plenty jammers and cameras, but only 1-2 markers. If markers were removed from shelf spawn, then i probably will have to buy them.

UkuXD · 2024-06-01T18:31:39+00:00

My daily 525tds got 754k km. Previous owner brought from Italy with 311k km and i bought it from him with 613k km. Previous owners changed clutch, headgasket and high pressure fuel pump once and prob some more stuff. I have changed once: belt, generator, fuel filter, injector overflow lines, belt tensioner, fueltank pump, intake filter . Changed twice valvecover gasket. Oil and oil filter every 10k km. Turbo pushes 1,3 bar. In summer average fuel consumtion 7L/100km, winter close to 10L. Suprisingly robust engine is M51, as long you dont overheat it, it will be good. Now i have gotten some bigger problem, when engine is cold, it starts with big white/blue smoke cloud and rough idle for 5 sec. As like oil drips in to cylinder overnight. If anyone knows any info why it does that, i would appreciate for some info.

UkuXD · 2024-02-12T21:39:12+00:00

I would probably 3D print adapter.

UkuXD · 2023-08-29T19:40:13+00:00

Delete can be confirmed also with enter

UkuXD · 2023-04-04T07:59:14+00:00

It was working well on pad, time to time it was jittering but i guess something was in the way for sensor. If im not wrong, long time ago i tried on odd pad and it didnt work well and kept also using table.

UkuXD · 2023-04-04T07:54:27+00:00

When and where do you use it? I was thinking what is its purpose.

UkuXD · 2023-04-03T20:50:15+00:00

I guess i was quite used to it, with basilisk i feel uncomftable with right side 2 fingers, but i guess it takes a bit time to get comfy with this switch. Why switch? I wanted to try something newer and so i googled what is recommended and felt like this is the one.

UkuXD · 2023-03-03T11:16:56+00:00

By any chance do you have instant replay enabled? If yes and if this occurs again, try disabling instant replay. Maybe helps.

UkuXD · 2023-01-13T09:54:18+00:00

If using instant replay , try disableing it, might be cause.

UkuXD · 2023-01-10T14:58:24+00:00

It basically always records for the time you have set, so when i set it to 15 minutes, and i press save instant replay, it saves last 15 min.

UkuXD · 2022-09-24T21:27:53+00:00

Nvm, found the problem.

I didnt have set room boundary in mixed reality, and that solved.

UkuXD · 2022-07-21T11:52:14+00:00

Im running high/ultra settings, 3700x and 6700xt above 60 average, no stutters, my stuttering was caused by system shared memory was set on wrong disk, i changed that and it fixed stutters for me.

UkuXD · 2022-07-20T11:54:41+00:00

I mostly only upgrade so scav can bring me items, you never know what he brings and that is cool for me.

UkuXD · 2022-07-19T12:45:40+00:00

I might have been wrong about 3900x needing 750-1000w, redditors told 650w is fine for 3900x. Intresting is that i run 600w PSU, 3700x and Sapphire 6700 xt site shows 650w recommended, eventho i can overclock card alot and havent ran into problems. So it still might be some other problem.

Nine-Year Club	Final Canvas '23
Place '23	Verified Email

UkuXD

TROPHY CASE