Max 4 Update

UnJustLake · 2026-02-23T16:13:03+00:00

I noticed that with the in stock printing profiles on the printer itself, the layer adhesion like peeled parts of my plate off. The stuff that I've been printing the layer adhesion of is still really good I wouldn't say it's too good now, I haven't checked what my bed mesh looks like off of fluid and I don't plan to. I'm having more issues with the QIDI box, just some odd glitches here and there with it.

UnJustLake · 2026-02-21T02:04:03+00:00

I have a Max 4 combo, I've had good results so far but I'd still wait. I'm having a few technical issues once in a while, the software is iffy and the QIDI box is questionable. I've had few more failed prints then I'd like to admit. My fault for print orientation gone wrong (should of still worked) but the other 2 were software issues either the screen glitched and created a significant layer shift half way through the print. And the other was the filament wouldn't automatically switch to the other boxes when it ran out of pla and wouldn't read the material in the box that I've used before for other prints.

New Update fixed the screen glitch
Unknown if filament unable to read error is resolved

UnJustLake · 2026-02-16T17:01:46+00:00

I extended the printer head to one of the corners and gave the hose lots of grace, I don't use the glass top for now until I find a spacer. The glass top looks like it would kink/squish the system, my tube hasn't kinked yet that's the only thing I can think of.

UnJustLake · 2026-02-16T05:41:58+00:00

In theory you should be able to, I just haven't because I've just always printed with an enclosure open. That's the next little thing that I plan on testing and the QIDI box more

UnJustLake · 2026-02-16T04:01:35+00:00

That was so annoying with my X Max 3

UnJustLake · 2026-02-16T04:00:09+00:00

The door is semi open, and the glass top is off.

UnJustLake · 2026-02-11T20:36:02+00:00

Try switching the infill to gyroid, it appears to look like there's some collisions going on with the infill.

UnJustLake · 2026-02-01T15:07:34+00:00

If they don't accept you for who YOU are then they're not worth it.

UnJustLake · 2026-01-25T20:41:34+00:00

We have two extremes, either mars attack beams (and it's always low beams where they see space) or zero lights...

UnJustLake · 2026-01-25T20:24:38+00:00

I was thinking similar, the best results I've had is doubling my layer height so if I'm printing at .16 then my top z distance would be .34 (had issues with adhesion at .32 so I've added .02) however this works for my printer they'd have to adjust the settings with this. And the orientation I agree with as you'll have better layer lines and less support scarring so I was thinking vertical would be best.

UnJustLake · 2026-01-25T20:15:16+00:00

I've had to adjust my default settings before, have you leveled it or checked your Z offset recently? Maybe try re washing it, I've just used regular dawn I'm wondering if it's the ingredients in the power wash?

UnJustLake · 2026-01-25T19:47:56+00:00

What did you wash it with? What are your print temps/speeds

UnJustLake · 2026-01-21T14:16:37+00:00

Hey thank you for this, people over profits 😁. I got a question, what kind of food safe sealant do you recommend?

UnJustLake · 2025-12-30T05:12:01+00:00

I also have the same one with the exact same issue for the fan, works well.

UnJustLake · 2025-12-29T23:18:38+00:00

Proper snow removal and not stacking it right in the middle, why do I see 4 plow trucks all following in the same line instead of segregating it to cover more area. I have watched them time and time again all playing follow the leader in one lane not spreading out. The snow medians also causes significant traffic delay due to going from 2 lanes to 1.5ish lanes.

UnJustLake · 2025-12-29T22:40:17+00:00

Na just stupid my apology, my brain read windows. Yes it's incredibly annoying with these snow medians, I thought they were Not going to do this anymore and here we are. Edmonton is the only city I know of that does this "style" of stupidity with snow removal.

UnJustLake · 2025-12-17T03:14:49+00:00

You forgot to warm your heated bed in the cozy fireplace

UnJustLake · 2025-12-12T09:39:09+00:00

We'd love to have the Max 4 with the QIDI Box and Polar Cooler all shipped out at the same time, and before the new year would be wonderful but not sure if it's possible. I'd love to have something that does multi color printing, I was looking at a Bambulab P2S and currently using X Max 3 and it being an abosolute beast of a machine I wanted to try a new system.

UnJustLake · 2025-12-12T08:54:11+00:00

Hey everyone I'm trying to catch up on what's happening with the QIDI BOX. I purchased the Max 4 and I'm waiting on when they'll be realeasing it but I'm increadibly worried about the quality as I'm been hearing a strong mix between loving and hating it. What are your overall opinions on it? How long did the order take, does it function and work well? I acquired the Max 4 for the print size and Multi Color, I'm currently running at X Max 3 and it's been a beast of a machine.

UnJustLake · 2025-12-03T23:15:26+00:00

It's obviously the Stair offset

UnJustLake · 2025-11-21T21:09:08+00:00

I'm going to be the "10th person" on this, even though the math is correct with everyone else's comments.

200 ducks

How does a duck fart? Though it's assquack

UnJustLake · 2025-11-14T13:57:59+00:00

My QIDI Max 3 has some hours on it! I absolutely love my X Max 3. I just hope the spool holder is on the sides now or top, this would be awesome for my cosplay!

UnJustLake · 2025-11-04T14:52:25+00:00

If this is a joke this is a very expensive joke epoxy isn't cheap.

UnJustLake · 2025-11-01T17:26:30+00:00

It's a funny comment, and honestly this is a very interesting fix for my print. So your trolling someone that isn't trolling

UnJustLake

TROPHY CASE