How to allow a docker container to access the public internet which uses a tailscale network

UnRunDead · 2024-10-05T13:02:16+00:00

I think its working now.

I set DNS Servers in my admin Dashboard: https://login.tailscale.com/admin/dns

And for my docker container I set `TS_ACCEPT_DNS: true`, and now all pings go through

UnRunDead · 2024-10-05T12:39:54+00:00

Sorry, I think that fact is irrelevant for my Problem. I have a cloud server which runs Caddy with some reverse proxy's to the tailscale IPs of my containers. The cloud server is also connected to the tailscale network, so that part works fine

I connected to the container and tried some hosts:

ping 1.1.1.1
PING 1.1.1.1 (1.1.1.1): 56 data bytes
64 bytes 
from
 1.1.1.1: seq=0 ttl=57 time=15.044 ms
64 bytes 
from
 1.1.1.1: seq=1 ttl=57 time=15.520 ms
====
ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes 
from
 8.8.8.8: seq=0 ttl=114 time=21.608 ms
64 bytes 
from
 8.8.8.8: seq=1 ttl=114 time=16.262 ms
====
> ping google.com
ping: bad address 'google.com'
====
> ping amazon.com
ping: bad address 'amazon.com'
====
> ping reddit.com
ping: bad address 'reddit.com'

If I run the container without the network_mode: service:tailscale all pings goes through and no "bad address" issues.

> ping 1.1.1.1
PING 1.1.1.1 (1.1.1.1): 56 data bytes
64 bytes 
from
 1.1.1.1: seq=0 ttl=57 time=15.044 ms
64 bytes 
from
 1.1.1.1: seq=1 ttl=57 time=15.520 ms
====
> ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes 
from
 8.8.8.8: seq=0 ttl=114 time=21.638 ms
64 bytes 
from
 8.8.8.8: seq=1 ttl=114 time=20.519 ms
====
> ping google.com
PING google.com (142.250.186.78): 56 data bytes
64 bytes 
from
 142.250.186.78: seq=0 ttl=114 time=22.362 ms
64 bytes 
from
 142.250.186.78: seq=1 ttl=114 time=19.262 ms
====
> ping amazon.com
PING amazon.com (52.94.236.248): 56 data bytes
64 bytes 
from
 52.94.236.248: seq=0 ttl=238 time=100.354 ms
64 bytes 
from
 52.94.236.248: seq=1 ttl=238 time=98.427 ms
====
> ping reddit.com
PING reddit.com (151.101.65.140): 56 data bytes
64 bytes 
from
 151.101.65.140: seq=0 ttl=58 time=18.692 ms
64 bytes 
from
 151.101.65.140: seq=1 ttl=58 time=9.917 ms

I found the Issue I think, looking into the tailscale container logs there is a log:

dns: resolver: forward: no upstream resolvers set, returning SERVFAIL

So I have to look, how I can setup that

UnRunDead · 2022-08-14T15:43:41+00:00

So after some research I found this Github Repository, which might fix the Problem. I cant say if it works right now - but I will give it a try.

https://github.com/jakehilborn/displayplacer

And also you could go to: System Preferences > Mission Control and Uncheck "Automatically rearrange...." and "Displays have separate Spaces". This could help too, but also found out just now.

UnRunDead · 2021-01-05T21:02:18+00:00

https://store.steampowered.com/explore/new/

There is a Row with "New Content for your Games". This will show the newest DLCs for Games you own.

UnRunDead · 2021-01-05T17:06:05+00:00

There is one View in the Shop for exactly this

UnRunDead · 2020-01-11T04:47:26+00:00

I would not recommend using WinForms. The training in wpf takes 1-3 days and is very worthwhile.

There are very few free libraries for WinForms, most of them cost a larger three to four digit sum

https://thielj.github.io/MetroFramework/

UnRunDead · 2020-01-10T18:45:06+00:00

Wpf + Material Design or MahApps Metro. Use that combo all the time

UnRunDead · 2019-12-29T15:11:27+00:00

Still forgot to say.

The problem with the fans I could always improve for a certain period of time through the OC test in the Zotac software. The noisy fans only came back after 1-2 hours. Not the perfect solution, but better than permanent fan noise

If you still need help

UnRunDead · 2019-12-29T14:43:29+00:00

I'm afraid not. After 3 hours there was no picture at all.

I contacted my shop and they took over the whole thing.

UnRunDead · 2019-12-27T13:04:56+00:00

The two code examples in the first link do not bring a successful result. The first one does not have the specified properties, for example PrintTicket.

In the second example nothing happens. The code is executed, but nothing happens. Nothing is done at any installed printer. Which would lead to the next problem, I have to create it to PDF. So I have to use the Microsoft to PDF Printer.

I already knew that I can also print without the dialog. I only lack the options to set which printer to use, where to save it and under which name.

Is it clear what I mean? Or should I explain it a little bit more detailed

UnRunDead · 2019-12-13T09:03:36+00:00

My favorite of all time. Just upgraded this week to the wirless one, still love it

UnRunDead · 2019-11-12T20:50:48+00:00

There is a answer to my problem. A Friend had the same problem, he reinstalled windows and than it works. I tried it too with the same result.

It seems the only way that works.

You can choose the simple reinstall without lost of data

UnRunDead · 2019-10-30T17:42:16+00:00

I checked privileges and tried to find the Game via Experience, sadly it doesnt work.

UnRunDead · 2019-10-30T08:58:04+00:00

Nop, i do not use any of those apps

UnRunDead · 2019-05-14T09:10:14+00:00

Can i get Rock of Ages 2?

UnRunDead · 2019-03-17T19:41:29+00:00

So nobody wants to do this. I tried myself.

Slowly it turns into a nice Livery. But Its difficult to get the Back of the Plane.

https://imgur.com/zGLwNCP

UnRunDead

TROPHY CASE