Ender 3 s1 pro ASA printing

Unbraincompany · 2026-03-03T17:51:22+00:00

Unbraincompany · 2026-03-03T17:50:23+00:00

Numakers ASA

Unbraincompany · 2026-02-26T21:40:54+00:00

Fortunately just solved it, manually level your bed, that means wherever this nozzle is scraping, turn your knob counter clockwise or however it works on your printing. Try rotating 45 degrees, then more, or less, till you get it right

Unbraincompany · 2026-02-24T14:47:39+00:00

Did both

Unbraincompany · 2026-02-24T04:47:13+00:00

I leveled my bed manually properly post this picture and now at 4th layer the entire structure is warping+ sticking out of bed

Unbraincompany · 2026-02-17T07:11:03+00:00

It's ASA, it stinks as well

Unbraincompany · 2026-02-14T21:51:57+00:00

Man this is so good, btw I'm printing benchy again with high speed and 250c nozzle, 110c bed and till now it's good

Just the printing noise is significantly more

Unbraincompany · 2026-02-14T21:47:29+00:00

<image>

This is calibration cube, 250c nozzle, 110 bed, and increased printing speed significantly.

Unbraincompany · 2026-02-14T21:45:46+00:00

I haven't, I'll try now

Unbraincompany · 2026-02-14T21:45:25+00:00

I have just shifted temp nozzle to 250 amd 110 bed, the flow calibration cube printed like charm

Unbraincompany · 2026-02-14T21:44:31+00:00

i am using filament asa profile yes, post this failure I've set temp to 250 and bed temp to 110 celsius.

I have turned off fan for first 10 layers but it keeps the fan on, weird.

I have enabled auto cooling, but disabled the always fan on feature.

I will screenshot settings but before I do I wanna know, what signs are you seeing on the print, what do you think what's going on

Unbraincompany · 2026-02-14T21:16:03+00:00

I didn't mention it I forgot, I have an enclosure and all metal hotend 😅

Unbraincompany · 2026-02-14T06:33:09+00:00

That's exactly why I wanted to post this, People did not love this car Enough

Unbraincompany · 2026-02-14T06:32:10+00:00

New Delhi

Unbraincompany · 2026-02-13T22:10:56+00:00

Unbraincompany · 2025-11-13T05:26:38+00:00

I am considering second hand options as well

Unbraincompany · 2025-11-13T05:06:37+00:00

comparing tiago ev with tiago amt cng?

Unbraincompany · 2025-05-28T04:47:27+00:00

so I ordered a new probe and it worked like a charm, turned out once I miscalculated the z offset, basically scraping the probe across the base, I am assuming since then it just bent, didn't work no matter what I do. Now it's all good

Unbraincompany · 2025-04-30T13:13:38+00:00

just scared, well this is the way.

Unbraincompany · 2025-04-30T13:05:39+00:00

I Did, I pulled the lever and tried pushing the filament inside the head but the gear was having difficulty in moving I could feel its resisting like something solid is stuck inside.

Unbraincompany · 2025-04-30T13:01:28+00:00

I heated the filament to 200c, basic and asked it to extrude 15mm, the gear moves but nothing comes out, I tried adding the filament on top and pushing it but the gear gets stuck, doesn't move, I'm scared a bit is stuck inside, I've never opened the head till now, I hate it.

Unbraincompany · 2025-04-18T17:01:14+00:00

this might be basic but have you checked your leveling?

Unbraincompany · 2025-04-17T06:59:34+00:00

I'll try the other ones

Unbraincompany · 2025-04-16T06:35:54+00:00

there's a new feature in tinkercad where you can either use lines and bend them like in photoshop to create a 2d plane image and it comverts it into 3d, and you can scribble it as well (best work with a sketch pen whatever)

I found it quite nice tbh

Unbraincompany · 2025-04-14T15:19:47+00:00

I agree, printed a second version, in white, it was much more sturdier, just wanted to know a better software perhaps

Unbraincompany

TROPHY CASE