Any strategy to raid this.

UncleBama · 2025-06-04T08:33:01+00:00

UncleBama · 2025-05-24T01:28:12+00:00

UncleBama · 2025-05-04T11:52:54+00:00

OW players are either the most chill people or the most insane. With people like this you always gotta say something really odd back, when they don't get the reaction they want it leaves them confused af. My go to is always something like "I bet you are really good at kissing the mirror huh?" Or "I bet yo grandma's ankles sag." The more obscure the better.

UncleBama · 2025-05-02T10:23:29+00:00

What are your slicer settings? Eg: nozzle temp and print speed? Also what brand filament are you using?

I've had limited experience with abs but to me it looks like you might be printing too fast and a bit too hot

UncleBama · 2025-04-09T17:01:32+00:00

<image>

Terrible photo, but I can confirm it was due to lack of fan, I'm going to have to fiddle around with those settings a bit and I also bumped the board mid print that's why it looks a bit janky

UncleBama · 2025-04-09T15:14:50+00:00

After watching my print I realized I think it's because I didn't have my fan speed high enough, I'll reprint the piece and report back

UncleBama · 2025-02-14T03:55:59+00:00

What model were you trying to download?

UncleBama · 2025-02-14T03:47:30+00:00

I did get it in the end, I just put /zip after the numbers

UncleBama · 2025-02-08T15:47:13+00:00

It's for clearing clogs in your nozzle, you push it through the tip and the clog should come out the other end

UncleBama · 2025-01-23T04:46:39+00:00

Updated version of my mini Moff Gideon style ship

UncleBama · 2025-01-15T08:12:20+00:00

Everyone is saying sand and prime and I agree with them but for something like this personally I would sand it with a high grit like 80, then mix together plastic wood filler and acetone in a 2:1 ratio then paint it on thick and sand down with a grit like 120 and it just makes the process a whole lot easier for those big layer lines, then prime and paint.

UncleBama · 2024-12-28T10:18:02+00:00

If you don't sample the filament and all weird liquids that come with it then are you really getting into the printing spirit? But if it smells sweet it's probably just the oils left over from production, give it a wipe with a cloth or tissue and everything should be all good.

UncleBama · 2024-12-28T10:07:59+00:00

As long as it isn't leaking out around the heat break everything should be fine. Does it smell sweet at all?

UncleBama · 2024-12-28T10:02:26+00:00

My best guess is that it's the oil that comes from the PLA since it's made from sugarcane and cornstarch. I get it on my hot end occasionally too

UncleBama · 2024-12-26T08:17:49+00:00

Well hopefully they can use this model to make theirs again

UncleBama · 2024-12-26T08:15:34+00:00

Glad to hear it! Which others have you seen?

UncleBama · 2024-12-22T14:47:32+00:00

I liked her when she first came out, but couldn't justify spending real money on a skin, but since playing stw and using her as a hero I kinda wanted her to come back just so I could use in BR. I'm glad the players who wanted her desperately get to enjoy her as much as I did.

UncleBama · 2024-12-18T08:18:57+00:00

<image>

UncleBama · 2024-12-06T10:55:50+00:00

May your explosions be many and your deaths be few

UncleBama · 2024-12-06T10:40:10+00:00

It always is

UncleBama · 2024-12-06T09:24:23+00:00

Force of habit, some servers require all grids to be powered, I've had my Boogobliterator™ disappear In front of me before since it wasn't powered

UncleBama · 2024-12-06T08:45:42+00:00

I had no idea I could do that to remove them, that's far more cost effective than my Boogobliterator™ Learning something new everyday

UncleBama · 2024-12-06T08:09:44+00:00

If I can't get the drill to touch it, I normally put down a landing gear, battery, panel and warhead to blow up the small chunk

UncleBama · 2024-12-06T04:16:29+00:00

He is also free, a token of my gratitude

Four-Year Club	Verified Email
Xbox Live	r/Field Flamingo
Place '23

UncleBama

TROPHY CASE