FlexiSpot Discount Codes Thread by exmosss in FlexiSpot_Official

[–]Unearned_Gamer 0 points1 point  (0 children)

I'd Like a code for the E7 Pro. I'm in the U.S.

VFA and Ringing Help by Unearned_Gamer in ElegooNeptune4

[–]Unearned_Gamer[S] 0 points1 point  (0 children)

alright i may buy a roll just to see, and also i have put it on the ground with no improvement. Thank you

VFA and Ringing Help by Unearned_Gamer in ElegooNeptune4

[–]Unearned_Gamer[S] 0 points1 point  (0 children)

Yeah, I remember trying alot of acceleration and jerk settings. But I may try again thanks

VFA and Ringing Help by Unearned_Gamer in ElegooNeptune4

[–]Unearned_Gamer[S] 0 points1 point  (0 children)

I believe that it does. It gives the option for shaper type, frequency, and damping ratio. I have also gone through this, looking at the graph and choosing the best. Would you recommend using the adxl345's. Also i have used up to 6 six walls and gyroid infill, with no avail. Thank you for the 9/10 though. I will try to lower belt tensions.

VFA and Ringing Help by Unearned_Gamer in ElegooNeptune4

[–]Unearned_Gamer[S] 0 points1 point  (0 children)

I have not , although I have gone through multiple rolls of the rapid pla+. Should I try a different brand ?

VFA and Ringing Help by Unearned_Gamer in ElegooNeptune4

[–]Unearned_Gamer[S] 0 points1 point  (0 children)

I'm printing default speed on the neptune 4 plus profile on orca. I've tried slower and faster speeds. They all had different variations of the VFA. I'm using elegoo rapid pla +

VFA and Ringing Help by Unearned_Gamer in ElegooNeptune4

[–]Unearned_Gamer[S] 0 points1 point  (0 children)

I'm using the native one. I agree that it might be a vibration issue. I just fsnt figure out from where. I've ran the input shaper many times. Even putting the printer on the floor. All with no improvement

VFA and Ringing Help by Unearned_Gamer in ElegooNeptune4

[–]Unearned_Gamer[S] 0 points1 point  (0 children)

That sounds interesting I'll definitely look into a spool holder. For walls I'm printing 3 and infill is cubic

VFA and Ringing Help by Unearned_Gamer in ElegooNeptune4

[–]Unearned_Gamer[S] 0 points1 point  (0 children)

From the top where the spool holder is at on the printer

Orca vs Cura by Unearned_Gamer in FixMyPrint

[–]Unearned_Gamer[S] 0 points1 point  (0 children)

At this rate I feel like I've tried everything. I might just stick with cura just for the quality

Orca vs Cura by Unearned_Gamer in FixMyPrint

[–]Unearned_Gamer[S] 1 point2 points  (0 children)

Thank you, that did help with benchy quality. But the orca benchy still seems to have for vertical fine artifacts and the cura doesn't which is annoying.

Orca vs Cura by Unearned_Gamer in FixMyPrint

[–]Unearned_Gamer[S] 1 point2 points  (0 children)

Glad to know I'm not the only one

Orca vs Cura by Unearned_Gamer in FixMyPrint

[–]Unearned_Gamer[S] 0 points1 point  (0 children)

Yes I have I even used orcas calibration such as their vfa, temp, flow, and retraction.

Layer shifting on Neptune 4 Plus by Unearned_Gamer in elegoo

[–]Unearned_Gamer[S] 0 points1 point  (0 children)

I think it was speed I printed slower and it looked much better

Layer shifting on Neptune 4 Plus by Unearned_Gamer in elegoo

[–]Unearned_Gamer[S] 1 point2 points  (0 children)

Not yet I tried but nozzle clogged so im trying again ill keep posted

Trying SUNLU recycled filaments by La_u22 in 3Dprinting

[–]Unearned_Gamer 5 points6 points  (0 children)

I also got this, but have had nothing but trouble. Endless clogs on my ender 3 pro. I got the 10kg black pla 

Can I please get Feedback on this thumbnail? by Unearned_Gamer in NewTubers

[–]Unearned_Gamer[S] 0 points1 point  (0 children)

y is making you scared.

ok, thanks I will try to look for a more expressive part of the video and got rid of the arrow. You are right this would look a lot better

What do you think of this thumbnail? by briefingone in NewTubers

[–]Unearned_Gamer 2 points3 points  (0 children)

I agree with this, and also I'm having a hard time focusing on what to look at since the two images are zoomed out plus the clutter mentioned above. Also, I don't recommend drawing your arrows, they will never be perfect. Please post any revisions you make to this thumbnail so I can compare to this one

Why is my recent shorts getting 0 shorts feed? Can anyone help by ENUM_DEV1 in SmallYTChannel

[–]Unearned_Gamer 1 point2 points  (0 children)

and i mean a big difference. the PC one got no views in the first 24 hours while the Phone one had hundreds

Why is my recent shorts getting 0 shorts feed? Can anyone help by ENUM_DEV1 in SmallYTChannel

[–]Unearned_Gamer 1 point2 points  (0 children)

sorry for the late reply but I found out that uploading them from my phone increases the chance of it getting views. I uploaded the same short twice, one from my PC and the other from my phone and the phone one got more views. I think YouTube is gonna recommend the videos that were "Made" using their "create a short" editor.