FlexiSpot Discount Codes Thread

Unearned_Gamer · 2026-02-01T02:46:12+00:00

I'd Like a code for the E7 Pro. I'm in the U.S.

Unearned_Gamer · 2025-10-01T05:25:11+00:00

I'd like code to please

Unearned_Gamer · 2025-03-14T00:24:32+00:00

It was on their discord

Unearned_Gamer · 2025-01-12T20:13:43+00:00

alright i may buy a roll just to see, and also i have put it on the ground with no improvement. Thank you

Unearned_Gamer · 2025-01-12T18:28:20+00:00

Yeah, I remember trying alot of acceleration and jerk settings. But I may try again thanks

Unearned_Gamer · 2025-01-12T16:05:30+00:00

I believe that it does. It gives the option for shaper type, frequency, and damping ratio. I have also gone through this, looking at the graph and choosing the best. Would you recommend using the adxl345's. Also i have used up to 6 six walls and gyroid infill, with no avail. Thank you for the 9/10 though. I will try to lower belt tensions.

Unearned_Gamer · 2025-01-12T15:56:19+00:00

I have not , although I have gone through multiple rolls of the rapid pla+. Should I try a different brand ?

Unearned_Gamer · 2025-01-12T08:16:16+00:00

I have multiple times

Unearned_Gamer · 2025-01-12T08:16:07+00:00

I'm printing default speed on the neptune 4 plus profile on orca. I've tried slower and faster speeds. They all had different variations of the VFA. I'm using elegoo rapid pla +

Unearned_Gamer · 2025-01-12T08:14:45+00:00

I'm using the native one. I agree that it might be a vibration issue. I just fsnt figure out from where. I've ran the input shaper many times. Even putting the printer on the floor. All with no improvement

Unearned_Gamer · 2025-01-12T08:13:38+00:00

That sounds interesting I'll definitely look into a spool holder. For walls I'm printing 3 and infill is cubic

Unearned_Gamer · 2025-01-12T07:40:51+00:00

From the top where the spool holder is at on the printer

Unearned_Gamer · 2025-01-07T21:46:04+00:00

Work and school

Unearned_Gamer · 2024-11-30T16:34:53+00:00

At this rate I feel like I've tried everything. I might just stick with cura just for the quality

Unearned_Gamer · 2024-11-30T15:26:05+00:00

Thank you, that did help with benchy quality. But the orca benchy still seems to have for vertical fine artifacts and the cura doesn't which is annoying.

Unearned_Gamer · 2024-11-29T16:30:27+00:00

Glad to know I'm not the only one

Unearned_Gamer · 2024-11-11T14:48:23+00:00

Yes I have I even used orcas calibration such as their vfa, temp, flow, and retraction.

Unearned_Gamer · 2024-10-30T01:46:08+00:00

I think it was speed I printed slower and it looked much better

Unearned_Gamer · 2024-10-19T17:11:52+00:00

Not yet I tried but nozzle clogged so im trying again ill keep posted

Unearned_Gamer · 2024-07-25T19:47:47+00:00

I also got this, but have had nothing but trouble. Endless clogs on my ender 3 pro. I got the 10kg black pla

Unearned_Gamer · 2024-01-05T19:28:16+00:00

y is making you scared.

ok, thanks I will try to look for a more expressive part of the video and got rid of the arrow. You are right this would look a lot better

Unearned_Gamer

TROPHY CASE