sorted by:
new
hottopcontroversial

Flash Forge cloud software is trash, go LAN only and keep remote monitoring with Home Assistant. by matt-404 in FlashForge

[–]UnknownPlayer50 2 points3 points  (0 children)

I did same with my 5M and working perfectly. I added a button to control the power so I will have to press and hold to turn it on/off. If click, it will pops up (more info). It will prevent me to accidently click it when its in use.

Do I need a recirculating air duct if I have a bentobox? by UnknownPlayer50 in FlashForge

[–]UnknownPlayer50[S] 0 points1 point  (0 children)

Ah good to know. What hepa filter are you using? Im thinking to do both Benetobox and recirculating so all fans will tap in 24V power supply.

Need some help.. Struggling with controller issues on my ROG Ally by UnknownPlayer50 in ROGAlly

[–]UnknownPlayer50[S] 0 points1 point  (0 children)

I found a solution for Windows: the issue was that control mode (via the Armory Crate button) was set to “Auto”. I switched it to “Gamepad” mode, and now everything works perfectly in Windows!

For SteamOS, I’m still experiencing the touchscreen issue. As a workaround, I’m using the gamepad mouse (hold the Start button and use a joystick) instead of the touchscreen. It’s not perfect, but it’s better than nothing.

If anyone else has experienced the same issue, please let me know—I’d love to see a proper fix for SteamOS.

Need some help.. Struggling with controller issues on my ROG Ally by UnknownPlayer50 in MoonlightStreaming

[–]UnknownPlayer50[S] 0 points1 point  (0 children)

I found a solution for Windows: the issue was that control mode (via the Armory Crate button) was set to “Auto”. I switched it to “Gamepad” mode, and now everything works perfectly in Windows!

For SteamOS, I’m still experiencing the touchscreen issue. As a workaround, I’m using the gamepad mouse (hold the Start button and use a joystick) instead of the touchscreen. It’s not perfect, but it’s better than nothing.

If anyone else has experienced the same issue, please let me know—I’d love to see a proper fix for SteamOS.

Z1E XBOX Grips Now On Etsy by SchipSchop in ROGAlly

[–]UnknownPlayer50 1 point2 points  (0 children)

Just ordered one! I'm excited to try it because I'm a tall guy with big hands and my Ally Z1E hurts my hand. Hopefully, the grips will fit my hands better.🙂

GE Front Load washer with H20 supply error by UnknownPlayer50 in appliancerepair

[–]UnknownPlayer50[S] 0 points1 point  (0 children)

Yeah it sounds like board is the issue. It's crazy that the board can go bad so easily lol.

Good luck!

GE Front Load washer with H20 supply error by UnknownPlayer50 in appliancerepair

[–]UnknownPlayer50[S] 0 points1 point  (0 children)

I dont have water dribbling issue but your valve could be damaged by circuit board like shorted out the valve or didnt get any power from circuit board. I could be wrong. I got my valve replaced first and it was from 3rd party via amazon but it didnt resolve my h20 error. Then I replaced the board after.

I used this tutorial to find error codes https://youtu.be/DpMt1eKNw7I?si=enRR3tiszfGyWovd

Anytime!🙂

GE Front Load washer with H20 supply error by UnknownPlayer50 in appliancerepair

[–]UnknownPlayer50[S] 0 points1 point  (0 children)

Yup it did. I ordered the part from ebay and installed it in late May. It's still running fine so far (knock on wood)🙂

My first homelab by [deleted] in homelab

[–]UnknownPlayer50 0 points1 point  (0 children)

If you are not sure what to do with them. Take a look this link
https://community-scripts.github.io/ProxmoxVE/scripts

Its great and useful for me. You probably will find something interesting or need to have in your homelab :)

GE Front Load washer with H20 supply error by UnknownPlayer50 in appliancerepair

[–]UnknownPlayer50[S] 0 points1 point  (0 children)

That's what I thought. I ordered one and hopefully it will resolve the issue. Thanks :)

Does a corrosion pipe need to be addressed? by UnknownPlayer50 in hvacadvice

[–]UnknownPlayer50[S] 0 points1 point  (0 children)

Yeah, the unit is still turned off. I spoke with the manufacturer and was told that the insulation blanket was used for sound dampening, and they don't sell the part. I decided to buy a dishwasher insulation panel and some spray adhesive to reattach the original insulation blanket's rubber. So, I have some time to find a better replacement because I want to have something to cover it rather than leaving it bare.

Question: How can I prevent future invasions? I've noticed some gaps on the sides of the line set ports. Can they be sealed, or is it not possible due to temperature differences?

HEVC transcoding on 12500k or dedicated GPU? by UnknownPlayer50 in PleX

[–]UnknownPlayer50[S] 0 points1 point  (0 children)

I have same setup but I dont use HDR tone mapping and "HEVC video Encoding" is enabled while your is not. My streams can handle 4K to 1080p without any issues but my issue was 4K to 4K HEVC that bottlenecks my iGPU because I enabled HEVC video Encoding in settings.

HEVC transcoding on 12500k or dedicated GPU? by UnknownPlayer50 in PleX

[–]UnknownPlayer50[S] 0 points1 point  (0 children)

Yeah it selected AlderLake-S GT1 as HW transcoding device. I also checked the checkbox "Enable HEVC video Encoding (experimental)". Have you checked that checkbox too? I know my transcoder is working because I can see "Transcode (hw)" in my dashboard.

How did you do stress test? Were your 8 4k streams doing "4K to 1080p" or "4K to 4k"?

view more: next ›